1996 GT-4 Hatchback
Year: | 1996 |
Chassis Code: | Not specified |
Type: | GT-4 |
Body Style: | Hatchback |
Transmission: | Manual |
Color: | dark red |
Location: | Germany |
Added about 21 years ago by snakeloa.
Performance
ARP Head Bolts
ARP Main Studs
Apexi Super Catalyzer 130 cells
Pirate Tuning GT35R Kit with 0.63 A/R (it is a GT3582R - 714568 - 3 )
with a recirc Downpipe
Blitz NÜR Spec R
Blitz SUS Air Intake
Custom Chrome Molly Ductile Sleeves
CP Pistons 86,5mm with outer polymer friction coating and ceramic top coating
customised C-One SPL Frontpipe
Full Street Port (Ported ans polished cylinder head)
Ferrea Intake and Exhaust Valves 1mm oversized
Greddy Oil Catch Tank
HKS SSQV
JUN Cam Slide Sprockets In / Ex
Set of ChrisK high lift cam shafts Jun Cam Shaft 272° + Intake 264°Exhaust
NGK IRIWAY Spark Plugs
Pauter Conrods
Pace handmade full alluminium Radiator
Shim-less buckets
SplitFire V Charger Spark Wire
TTE 1,4mm Headgasket
Treated Clevitte Bearings
Titanium Retainers and valve springs
TRD Short Shifter
TRD Sports Oil Filter
150psi Direct Port Water Injection (has to be installed somehow)
Aeromotive A1000 Sump Kit with 100 Micron SS Fuel Filter Sard 265 L/Hr Fuel Pump
Aeromotive A1000-6 FPR P/N 13109 Sard Fuel Regulator
1200CC RC Fuel Injectors (Peak & Hold) 800cc Sard side Feed Injectors
Custom made Fuel Rail by Chris K (Enginelogics)
6-AN Fuel Supply and Return Lines
ATS Twin Plate Carbon Clutch
Custom FMIC (has to be sourced)
Custom Side Feed Intake Manifold (has to be sourced)
bigger Throttle body (has to be sourced)
Suspension
Tig welded full CARDIFF racing cage ( a beauty ;) )
TEIN Super Street Dampers
TEIN EDFC Controller (has to be installed)
C-One Premium Tower Bar
C-One SUS Brake Lines
Cusco Lower Arm Bar (has to be installed)
Work Emotion CR Kai 18x8,5 FA und 18x9,5 HA with 245/35 ZR 18 Good Year F1
Exterior
C-One Rearbumper
Remodified and three coloured Wise Sports Front Bumper
JDM Taillights
Interior
Recaro Profi SPA Carbon Kevlar
Recaro Pole Position passenger side
Custom made seat consoles
H Belts (coming up)
Custom White Dials "Pirate Tuning"
New dashboard has to be created ;) (coming up) Edition (has to be installed)
More info
Defi Controll Unit II for:
Defi BF Exhaust Temp. Gauge
Defi BF Oil Temp. Gauge
Defi BF Boost Gauge
Defi BF Fuel Pressure Gauge
Defi Indicator
Innovate Lamda Kit XD1 and LC1 with heatsink (has to be installed)
Laptop controlled Water/Ethanol single throttle control (has to be installed)
AP Engineering Power FC and Commander (might have to be replaced by a hydra nemesis or motec or ...)
Apexi AVCR Boostcontroller
Berga battery 71 AH, 680 A
Blitz Oilt Temp. Sensor Adapter
CF Heat shield
C-One Aluminium Oil Filler Cap
Custom made Front Indicators
clear Side markers
Intercooler Heatshield
Polished Intercooler Head
Samco Blue Vacuum Tubes
ICELED Zen Kit
Battery Relocation Kit
All 7 Comments
Thanks, hope that the egine rebuild will be finished in the next 4 weeks... Hopefully :)
Posted over 18 years ago
mashala says:
so nice....
Posted almost 16 years ago