6G Celicas Forums

I'm located in Arkansas so shipping would be the only way. Let me see if I can find something a little more locally and I'll get back to you. Thx

Anybody have a saveable 7afe block and crank they would be willing yo get rid of for cheap?

Selling motor and transmission?

Do you have the complete motor with all the hardware?

seriously guys im asking for some help cause i dont know what to look into. I'd really appreciate some help

Guys I'd really appreciate the help cause I don't have an idea what to look for or where to start when it comes to computers for this. What standalone would any of you recommend for this thing and what would i need to get also?

The head and cams have been changed and worked over. It's got a 5 angle valve job, milled, full port and polish, over sized valves. Cam specs are 204/204 at .050 .327/.327 valve lift 110 lobe center. What stand alone would you recommend since the emange wouldn't control everything that I'd like to adjust

What emanate would you recommend me looking into? What would I need to get harness or anything else?

Is there differences in the emanage or what would i need to look at and purchase. sorry im completely new to it

I appreciate the boost idea guys, but that's going to wait a little while on down the line. What would you guys recommend standalone wise? How much would the piggy back contro?l because I'd really like to change rev limit, speed limit, fuel/ign curves, etc etc.

I'm pretty much new to this forum but i've gone through and read most of it. I know i could have done a motor swap or a head swap but i wanted to see the potential of the 7AFE on my own. I have a 7afe in a 93 corolla ( i know its not a celica but its the pretty much the same motor that comes in some of the celicas) with quite a bit of mods. oversize pistons 11:1 comp, pauter rods, balanced and knife edged crank, toga oil pump, web cams regrounds, David at Headgames did the head completely with the Tb and manifold, 4-2-1 headers and a short ram. I was needing to tune the computer though and I havent been able to find much when it comes to that other than piggy backs or stand alones so i was needing some recommendations if any of you could give me an idea.
THanks