6G Celicas Forums

Just wanted to say that i have come across different sizes on the bearing. I once orded a front bearing for my ST205 94mod. And the bearing was wrong size. ( to small ) I can give you the bearing nr for my 94mod ST205. 1 x PWK0074 offer @ £52.49 each. This is for a non ABS system. Tho the only thing that is different is the Sheild for the ABS sensor. 1 have a small hole in it. And the non ABS have no hole at all.

Website for this bearing: http://www.brt-bearings.com/1024x768/index.html

You can gett some more info on there about different sizes on the bearing for the ST205.

Hope it helps you out.

Toyota Celica ST205 1994 - 1999 AWD Requires Welding CTY051-KP 1450 9.8/549 4.5/252 P/U P/U


The same goes for the BC coilover's. You know if there is any coilovers out there that is Bolt on? have Tein atm. but those are broken. so im also looking for new coilover's

Hiya Dustin. Iv tried to gett a hold off you on PM's but i havent gotten any replies yett. So il try and post here.

Would like to buy the nr: 4) Triple Gauge Pods $150 (LHD ONLY) from you. I live in Norway so do you have any shipping estimate's for that?

What size are they? 52mm or 60mm? If they are made in Lithuania then maby you can just send em straigt to me? insted of sending it to the us and then back to europe?

Many thanks
Rudi

1 more from Norway here that would like to buy. Could try and see if we could fix a group buy here aswell.

Looks Great!! Cant wait to see it done.
1 question tho. Where did you gett the gauge holder on the dashboard? Im looking for that one and the 3pod in the middle of the console. You know where to gett that ?

The Aeromotive Stealth 340lph pump looks great. Think im going to buy that 1. Its just what i need. 340LPH should hold for 600HP. And not running the pump on 100%

bccentaur3 dont think the A1000 is a drop in. Did some search on it,. And some have em under the car or inside the car.

I see there are 3 different pumps:

11140 - 340 Stealth Fuel Pump (Center Inlet)
11141 - 340 Stealth Fuel Pump (Offset Inlet)
11142 - 340 Stealth Fuel Pump (Offset Inlet, Inline)

Anyone know's what would fit on my ST205? ( currently offshore so want the part when i gett home )

Czwalga do you have 2x walbro 255 pumps in your tank? And then made a T connection in the tank to deliver fuel in 1 line to the engien? or are they serial connected?

If i should buy a Aeromotive A1000 do i just disconnect the walbro pump and run the Aeromotive alone?

1 last question. The original fuel line in the ST205, Anyone know what they are good for? before you need to change or add 1 more line.

A quick way to test the clutch is just to put on the handbreak and relaes the clutch in gear. And then see if it starts to grip and want to move the car. Or i will just start to smell relly bad and the rpm goes up. ( The clutch is not cripping on the flywheel ) My clutch worked fine when it was cold, but when it got heated up it stated to slip.

Hope that helps you out.

Its time to release the beast! My 3SGTE engien needs a bigger fuel pump.

I now have the Walbro 255 but im am maxing that one out. Im looking for the full potential off the engien i have and that should be around 441KW/600Horsepower.

Anyone have any links to website or have any information on any pumps out there? Do i have to uppgade and use 2 pumps?
Iv tried to find some information on the site but i could not find any. If there is a post in the forum allready pleas refer me to it.

All info is appreciated

Regards
Rudi

Hiya. Im wondering if there are anyone out there that have the lower front grill left over?

Its the lower one in the pic. I live in Norway so would like to hear back from you whit price and shipping

The lower grill as seen in this picture


Regards
Rudi

Tried to put a Cusco front strut bar onto my ST205 and it hits the break fluid canister. So in my case it needs adjusment's But this is somthing i bought from a ST202 owner could be the reason it wondt fit.

I can inform that this type http://www.bc-racing.co.uk/c-bcc26/toyota-...perstrut-94-99/ is the "welding " type. Where you need to use the old lower arm/suspension and weld the coilover onto it. See the photos for more info. Im not that good in explaning I also have a TUV paper on the Factory. but this dont help here in norway. Since you dont gett it approved for road use when you have welded it.

http://img4.imageshack.us/i/pict0013pw.jpg/
http://img690.imageshack.us/i/st205new01.jpg/

TUV paper ( large fil 4mb ) http://img39.imageshack.us/i/tuvcertificateiso.jpg/

Hope this info helps somone out there ( im still looking for a TUV certify coilover that i can use, So shout if there is anyone out there that know's off any kind. )

How is it whit shipping to Norway? Would like to buy Hub/s Dont need the bearing's tho. They dont fit my GT4

Hiya Spree. I just made a payment for the LED kit to my Celica. ( UK/US ) mode. Is there any wating time on it? Orded Blue like in the movie that you have posted on the topic here.

Sweet sendt a mail to (mook@skewer.co.uk) he replayd : Hi Rudi,

Wouldn't be a problem making up a set of those for you. The dials retail for £90 as they're all custom made, but if you're a member of the GT4OC you'd get a £10 discount. P&P to Norway would be £5, making it £95 all in - approx 870 kroner. I'd be able to take payment via Paypal if you're happy with that.


Im so happy now you wont even belive it!! :D Finally afther like a year of searching TYWM

LoL 500USD for the TRD dial's Guess im looking for the 280Km's then hehe. Is there anyone that know of anyone that make these anymore ( dials ) i see many off you here on the forum whit relly nice dial's

Hi. I see that some off you convert your speedomter from KMh to MPh. Now i bought a GT4 ( ST205 ) and the speedomter is just messet up. So im wondering if there is anyone off you out there that have a 280Kmh or even a 300Kmh dial?

I know that lookwood make some speedometer's dial but they thats not for me. Whit the MPh in the middel and stuff. I have a pic of my speedo and the dude that had the car before me made the dial's out off paper. So when the light go's on it just looks like a trafic light going crazy. ( And the previus owner dident jsut put the paper ontop off the old dial's ) He have taken the black dial plate off.

I have tried to find somone that make's the GT4 dial's in KMh but i guess thats a rare thingy. Anyone out there that can help me?

O.o and the 180Kmh japan version is not enuf for me

If i only lived in the USA so many cheap parts over there. anyways. i sent you a priv msg. hope it helps.

I can add that we have tried some electrical fan's and then Dyno the car. There was a small gain at low rpm's. But as soon at the engien gained Rpm's the fan could not keep up. So you lost some effect at the top. As the fan became a barrier insted. Tho there was some gain in old disel engien whit no turbo. Would i spend money on it? NO would agreed whit the rest here. its only SCAM.

Hiya John. What type off car it that you have? Suspension's? I did a quick search off the web and found this ( http://priuschat.com/forums/gen-ii-prius-c...ion-06-a-3.html ) I know my borther had a problem on his 200sx. But that was an old support bushing that was worn out in the front. Could not hear it when the car was standing still. Only when driving the car the sound could be detected.
Maby you should take a look at the left side and see if you find anything there.

Nah. i tought so myself. But the idiot that had the car before me have taken them off.... and he dident know where they whear now. Was only paper clued onto the plastic ( under the dial ) i orded the dials from speedhut and put inn the RPM and KMh, but im missing the fuel/turbo dial. so now it just looks like a mess.

Thx for the link. But iv been on Ebay. That cluster only show 180km Need a bit more then that

Hi. I see that some off you convert your speedomter from KMh to MPh. Now i bought a GT4 ( ST205 ) and the speedomter is just messet up. So im wondering if there is anyone off you out there that have a 280Kmh or even a 300Kmh dial? Need a 3 dial so that everything is correct.

I know that lookwood make some speedometer's dial but they look relly bad if you ask me. Whit the MPh in the middel and stuff. ( so thats a no no ) I have a pic of my speedo and the dude that had the car before me made the dial's out off paper. So when the light go's on it just looks like ****

I have tried to find somone that make's the GT4 dial's in KMh but i guess thats a rare thingy. Anyone out there that can help me?

Hiya. I was looking around for some parts to my car when i came accros this website ( http://www.megazip.ru/ ) I know its in russian or somthing like that. But you can still pick your car and look true all the partnr and more. I dident use much time on the website. But i see there are Many Many types of technical drawings here. Boat engien's / Car / Motorcycle and more. Tried to seasch the 6GC forum and could not find anywhear to post Link's like this. So i made a new one, Hope i did the right thingy here

Anyways, Hope you like it.

I did also gett a mail from the shop ( Autoart ) about the clear turn signal's. But when i tok a close look on them they dont have the E13/ Toyota and the texting on them. Tho wolfie308 makes them out off the original-lens and this lens also have the E13/toyota and all the other texting on em. Somthing that is needed in most off Europa to gett a legal turn signal glass. Im just saying, Thats way i chose wolfie308 product. Live in Norway and they have very strict rules when it comes to a car. I know its not " Toyota's " product but hey, What can they say. The lens have E13 on em So thanks again wolfie308 for make the product i need