6G Celicas Forums

Nuts in reverse tach.

Uh... I kinda forgot about the meet. I'll have to catch the next one.

Thought these were cool.

There's "universal" ones and some Toyota based. Cheap enough (lol) and dual color which is cool.

Suppose I'm just daydreaming.

Just something that bolts in & is brighter/ more modern would be nice.

Has/ can anyone 3D scan 96-99 fog lights, then to 3D print a bracket to fit more common aftermarket fog lights?

Never heard his car was broken.

Late in August or September is ok with me.

Kinda a dumb question... Any recommendations for fog light bulbs (H3 style)? I want amber/ yellow color.

Sometimes it's just time & motivation to do what ever needs to be done. I just lack the motivation.

Yeah I did see some of the service info. Just need more motivation to work on it again, lol.

Oh... forgot to mention... It looked like the sensor had been replaced before. As 2 of the locating tabs were ground off to fit the connector. The locking tab (south) & the one exact opposite (north) were ok but the (east & west) tabs were ground off.

Not sure what might be the exact issue with the cruise control... but after adjusting the cable, setting cruise it will accelerate 5mph past, then slowly decel & keep a few mph above set speed. And it seems the few times I used the decel on the cruise stalk it wanted to accelerate! I only tried cruise a few times so not sure exactly what's happening. I might try & take a video, will probably make more sense there.



Bison are the coolest!! Especially when they attack people that get to close to them in national parks, LMAO. Definitely will do that next time!

Finally got around to fixing the Celica. Ended up being the coolant temp. sensor for the ECU. Unplugged it & ECU read -40°, then jumped the connector & it read 284,°. Also put an ohm meter on the old sensor & nothing.

I swear this is the sweet spot year for cars. Most of the time super simple to diagnose.

Also tightened up the cruise control cable. It would accel & decel like maybe 4mph from set speed. Hope that fixes it & I didn't f*ck it up.

I think that's all for now.

So... Had a P0115 (Engine Coolant Temperature Sensor 1 Circuit) pop up, So that's just dandy.

At least for now I have another POS to drive.

Not like it hasn't stopped you before, lol.

Sometimes I'm just not motivated enough to work on my own car after working on other people's stuff.

Next meet should be a hang out & we all work on each other's car. I'd be alright with taking a few days off to bull**** & work on cars.

Won't be able to make it, big sad...You're going to have a good time by yourself. I'll be in Chicago in late October but it's for family.

I believe it's on or off. So if it's spinning slower, there is an issue somewhere.

Just crazy windy & temperatures undecided where it wants to be at.

I also agree with August or September?

Lost the job this week that I had for 9.5ish years, but luckily found a new one quick. So everything starts over, lol.

I like the newer Mazdas. More a fan of the 6.

I'll update the thread.

Wasn't that like a newish Sylvester Stallone movie? Lol

Well damn.

I'll be interesting on all these aluminum cars in a few years.

Rocker panels are the worst. Bed is in ok shape.

Well it is parked next to my truck that's a rusty POS.

To late. Drive it to work today & I'll probably do it tomorrow & Wednesday.