6G Celicas Forums

Do you have an idea of what you spent on this steering project?
Looks great as usual.

Thanks for the link!

I'm down to one code, 14

Turbo pressure or Ignition signal. I have the ignitor wired up, I believe it to be correct. Coil pack is wired up. I think I ruled out the 2 wires at EA1, I think they are for Items that I removed from the car. The white wire for the alternator had been wired up.

Any Ideas?

Just an update, I have the harness in starter work,s fuel pump works, checked the CEL had two slow blinks. Gonna try to figure out what that means.

Thanks Art,

I have 91 3sgte wiring diagram (my engine is a 93), but do not have 7afe. I do have a spare fully intact 7afe harness. I was trying to dig up some threads on it, but I totally forgot where to find it. If you could point me in the right direction I would appreciate it.

I have 95% of the harness intact (just unplugged at the moment), I wasn't sure If I could plug in the rest of the harness and try to start it. What I have left to do is wire up the plug at the alternator, wire the O2 sensor. I can get those wired up tomorrow afternoon, and see what happens after I turn the key.

The few things I have in question are those three wires.

Thanks again guys,

To be completely honest Manny. I'm trying to get this thing up to CSP. I want to have some fun again.

I have the starter wired up already, not sure if its correct, but I believe I didn't mix those wires. I have 3 wires left at EA1, and three wires at the other end of the harness. Like you said one is for the alternator. The other two I don't know, colors are different on both ends.

I'll hold off on shipping the whole harness for now, I think it will run with this harness, just a matter of putting the puzzle together correctly

Couple more wires that I need help with.
The black with yellow stripe is from that blue plug, the white wire goes to the alternator, Black with white stripe in the third pic. Fourth pic shows the wires I have left at EA1, plus the black with blue stripe from previous post.

Need a little help with this wire blue with black stripe, can't find the other end. Not sure if its a left over from the 7afe.

Thanks guys. I"m happy to get back in the game.

I only have 1 O2 sensor and that wire is accounted for. I don't have AC so that can stay out then. I will have a couple more pictures of plugs tonight. I'd like to get this thing running by next week. Fingers crossed

Thanks Dustin!

I will try to get the rest of the pictures up tonight. Here are the wire colors to go along with those plugs. From what i remember, which isnt much lol. I cut out plugs that werent connected to anything. But I could be wrong.

Bringing this back from the dead. I can't believe its been 5 years since I drove my car. Holy S**T.

I'm slowly putting it back together, I have the harness plugged in from the cabin to the fire wall. The hard part is next, I have a few plugs that need to be identified. I'm not sure if I need them or not. I did away with tucking the harness, just going to clean it up and get the car running. I'm itching to drive it now. I'm going to work on it some more tomorrow night, hopefully have the harness at 90 to 100% installed.

If you wiring gurus could look at these pics to help me figure out if i need these plugs back in my harness or not, that would be awesome.
I'm going to re-read this thread. I think I asked about these plugs already.

Edit: yeah I did ask about some of the plugs. I'd like to rule out the three in the picture

pm'd about the blinkers

Wish I could be there! Next year should be better for me. Have fun guys, cant wait for the pics!

Nice work, this is really great info.

Great idea guys! Its cool to hear you guys shoot the **** about these cars. Makes me miss my car, wish I had it running again, Keep it up!

Buy my car, I will keep my engine. Buy a 3rd gen set with rear diff and go to town.

I will sell you my car for 7,000

sold

200 + shipping for front and rear if I split the set. I have a deal for the whole kit working right now. If it falls through, I will let you guys know.

possible if I can get buyers for the other pieces.

I have a full set for sale. The skirts are from Doggy, from the group buy a few years back. I have front and rear splitters for sale fronts might be OEM, rears are chrisC.

Presure2 has the exact set I'm selling installed on his car.

First one with $500+ shipping takes it all. Or you can pick up, the parts are located in MA.

Thanks guys,
DEF

Came up this past weekend, nice work. Those welds are looking real nice. Almost ready to roll !!!!

Need some help guys, two issues so far

The harness is back in the car engine turns over but I'm not getting fuel. The fuel pump doesn't turn on during normal operation. I jumped FP and B+ and the pump comes on but stops running once I start cranking in jumper mode. I'm not sure where to start looking, I tried to keep track of all the wires but this project took me 6 months to complete. I need help tracing out the wires for the fuel pump. Basically I need pins and colors to check.

Second issue,
My stock engine temp gauge jumps all the way to H once I turn the ignition key.

Everything work fine before I started, I need your help to find out where I messed up.

Thanks guys

Its about F'ing time.

Just waiting on parts now. Half the wiring is done, I moved the fusebox back to stock location just to be on the safe side. Just have to extend about 15 wires. Hopefully it start without any problems.


I wanted to move some gauges too

Sold