6G Celicas Forums

https://suchen.mobile.de/fahrzeuge/details.html?id=286748453

Listed it for sale again. Maybe someone will take it and have good fun or part it out, as it is full of good barely new toys.

Price drops, drops... until someone will not hold back.

Maybe it's time?
It still stands in my yard, I do not use it.

Limited time offer (till 2016/11/01)!

Car can be delivered to USA NY or NJ ports for free!

What do you mean illegal?

Price only 22.200 USD

Can be shipped to USA.

Thanks!

Thanks!

Sorry, No.

Hi,

Selling my time atttack gun. Just finished full rebuilt. All info below.

More pictures: ...wix.com/celica-gtfour-st205



Engine is newly rebuilt with new forged internals. All setup is done for 450 HP. Break in on engine must be finished and final ECU tuning must be done.

I list below main modifications. List is not final. All parts what were newly installed during the last project stage (and still was not used in competition or trainings) are marked as New.

1994 Toyota Celica GT Four WRC Edition. Rev. 4 engine 3S-GTE from ST246.

Car is FIA certified.

Performance:
JE Pistons (New)
Eagle Rods (New)
DARTON Sleeves (New)
ARP main studs kit (New)
ARP head studs kit (New)
ARP rod Bolts (New)
ACL Race main bearing (5M8361HX)
ACL Race con rod bearing (4B8366HX)
ACL Race Thrustwasher Set (2T1689)
OEM had gasket (New)
OEM seals (New)
Head ported and polished
Balanced Bottom end
NGK Sparkplugs (New)
Low temp. Sports thermostat (New)
Mocal oil cooler
Catcams adjustable cam gears
Custom intake manifold
Tubular exhaust manifold (New)
Aeromotive FPR (New)
Link G4+ Xtreme ECU (New)
BC coilovers
HX32 turbo (New)
Turbo heat shield
Tubular exhaust system
Custom Intercooler piping
Large front mount intercooler
AN16 Sports breather system (New)
Bosch 034 recirculation pump for cooling system (New)
Additional cooling circuit
TRD 1,3 bar radiator cap (New)
K&N air filter (New)
Tial MVR Wastegate WG 44mm V-Band Red (New)
Custom oil catch tank
Bosch 044 fuel pump (New)
Siemens Fuel Injectors 1000 cc/min 4 bar, 12 Ohms (New)
Greddy Profec B Spec 2 Electronic Boost Controller
Fidanza Ultralight flywheel
Exedy Clutch Kit (Exedy Pressure Plate, Exedy 3-PUK Clutch Disc, Release Bearing)
OEM water pump (New)
OEM pulleys (New)
Electric power steering
Small baterry relocated to the rear, housed
Polyurethane engine mounts (New)
Small windows washer tank

Suspension, Brakes, Driveterrain:
EBC Yellow stuff brake pads
Additional cooling vents/ears for brakes
Rear suspension polyurethane bushes (Rear trailing arms, Rear control arms inner front and rear, Rear control arms outer front (New)
Sport rear diff cushion polyurethane mount (New)
Polyurethane rear subframe and rear diff mounts (Polyurethane bushes - rear subframe (4 big bushes), Polyurethane stoppers - rear subframe (4 bushes), Polyurethane bushes - rear diff mounts (2 big bushes), Polyurethane stoppers - rear diff (2 bushes) (New)
Aluminium traverse bushes (New)
Rebuilt gear box
Long sports wheel studs

Exterior:
TRD side skirts
TRD rear bumper extensions
TRD front bumper extensions
Japan Racing JR11 17" wheels (9,1 kg., 5*100 ET30 9,75")
Federal 595 RSR 255/40/17 tyres
JDM projector head lights
JDM tail lights

Interior and safety:
Innovative Aire/Fuel ratio controller/gauge
Apexi water temp. gauge
Apexi EL System Meter Control Unit
Zenky Boost, Oil temp., Water temp. gauges
QSP Steering wheel (New)
FIA certified Safety roll cage
Sabelt seats
Sabelt and Sparco safety belts
Aluminium door covers
Electric windows

Additional info:
E85 ready
Accident free

Price:
Only 16.000 Eur.

Car is LHD, located in EU.

Thanks!

Hi,

I have 4th gen 3SGTE engine from Caldina 2003 (ST246) in my ST205. Time for full engine rebuild and increase of power for up to 450 HP came.

Please, share with information - can I order all engine gaskets for 3rd gen 3SGTE engine? Will they fit 4th gen or there are some different ones?


BR.

One question - will 3rd gen engine gaskets fit to 4th gen gaskets? Or there are some of them different?

I'm making full rebuild of my 3SGTE rev.4 from ST246 and need to order all gaskets, including metal head gasket.

Some pictures:
http://automanas.lt/pecm-2011-saskrydis-lenkijoje/

Updated.

Used, but good condition.

Want to buy coilovers for ST205.

Best offer would be used TEIN.

I would consider other options as well.

UP

Hi,

I'm looking for Celica GT4 bonnet.

If somebody has it in Europe - let me know.


martynas @ automanas.lt

Up

3S-GTE engine for sale. Good condition, real mileage: 150.000 km.
WRC edition, 1994.

Full set (turbo, ecu)

Price: 1000 eur.

Location: Europe, Lithuania.

e-mail: martynas @automanas.lt

Question: Where?
Answer: Doggy

Thanks

Time for update from me. New shots:

looks really bad..

Looks good but this wouldn't solve all problems. I think to try GT4 hood.