6G Celicas Forums

please tell me how they perform, and where u got them

why would u need it for, is it for the agressive driver? to cut in and out of traffic and take hard @$$ turns

has anyone ever installed a SIDE tower brace here is the link if u dont know what im talking about

http://www.bulletproofautomotive.com/catal...hp?category=121

just scroll down untill u see "Side Tower Braces (6th gen)"

Does that really work, cause i have never seen that before.

please give me feed back if u have it installed in a 94 celica gt

well if u go to bullet proof automotive you can get the Jspeed strut bar front and rear. but no one has talked about the SIDE tower braces. you think that does anything

I think thats a Common problem because My car the SAME EXACT thing, and after 125K miles later it still runs like a CHAMP, my mechanic said dont worry about it, and after 2 years i stoped worrying about it.

yea ur right, mines a 94 celica so who ever has a 94 can only go 130MPH

at 6.2k RPM's i got to 125-126mph, but i dynoed it at 130 MPH (top speed), so if your car is stock, the Fastes you will ever go is 130MPH and thats if u dont have any air resistance (drag) to slow u down

umm actually im a give it one more try and then ill think about selling it

actually when i Take off the MSD the CAR runs like a CHAMP. I just didnt want to take the easiy way out and just return the MSD cause then i just wasted 200++ dollers for nothing. U know what im sayin??

ok my base line horspower is 114 Hp with 125 lb pounds of torque, after putting the MSD on i got 84hp, so i lost 30 Hp then when i replaced all my wires, plugs and rotor, i got 87HP. sorry about the confusion.

I bought the msd 6520 (digital 6 plus) and the tach adapter 8910 eis. I installed my Msd and it ran like crap. i dynoed it and lost 30 horsepower to the wheels. i replaced my rotor, wires, and plugs and i gain a whopping 3 horsepower.

i didnt do anything it was put in like it was supposed too

iv installed a MSD Digital 6 Plus and i lost 35 horspower, it ran like crap, i even had a tack adapter 8910eis, did anyone else have that problem