6G Celicas Forums

i've always wanted to this. there are ITB's available here from 4AGE BT. watch mode.

keep post sir.

how much for the pre-facelift fogs shipped in Manila, Philippines?

forgive for asking but are you in Japan now?

where are you located?

nice work. i'm specially impressed on that on board diagnostic!!!

now if you can do something about that "N" in the middle it would be awesome!!!
i'm guessing that's suppose to be the gear indicator?

wondering if you have manual to auto conversion parts. need the shifter and the cables. the heavy traffic here in manila, philippines just simply gives me a headache and my legs are killing me. hehehe

had 18x8 offset 30 with 225x40x18s, slight rubbing t the rear but can be fixed by fender rolling.

hth

all pictures shows bolsters in the center, that means only two can be seated at the rear comfortable (somewhat), had they designed it to be 3 seater they should have eliminated those bolsters and should look like the seats of a common sedan.

http://www.google.com.ph/search?hl=tl&...sa=N&tab=wi

my 2 cents

i believe its an optional equipment. my celi didn't come with it. no brackets, no switches and harness. so i assume the first owner didn't opt. to have it.

ST chassis code AT200 - - - -

no abs?
7afe engine
No foglamps

drain-clean pan-clean filter-refill tranny oil. the filter is actually a fine stainless mesh, no need to replace it unless its broken. some tranny models however does have throw away filters, but i don't think it is the case with celi tranny.

at least this is how i do it with my cars with a/t tranny.

now if you have a tranny dialysis machine that would be perfect.

hth

The 7afe OBDII should be distributor less sir, hence its got a crank sensor.

been using same camber bolt design for sometime now but with another brand. it works.

the bolt is actually a cam. when you twist it you'll get the low and the high profile. that's your camber adjustment range.

just bring along a can of throttle body cleaner when you go to pickup the celi. it sould work.

good luck

could be a busted igniter.

also see if this can help.

http://www.autozone.com/autozone/repairinf...900c152800b8b92

a 205 bonnet and a top mount intercooler should be great!!! ????? hehehehe

a supra stock wing would be a nice addition sir.

my 2 cents

Nicely Done Sir!!!

I admire how you strip-off those nice bride seats and made better if not best it can be!!!

Your In Car Entertainment is just Superb.

So did you compete in EMMA?

very nice install, i may ask, will a stock charger from a 4agze work on 7afe?

in the philippines its hard to find those vortech chargers, but i can definitely find/get a surplus 4agze charger.

TIA.

try purging the lines with compressed air.

that's not what i meant,

if it ain't broke don't fix it thing, this is what i mean. hehehehe

i'm using NGK now, before i used Denso. don't see any difference. hehehe

could be durability in the long run?

http://www.carsparkplugs.com/ViewCatalogue...oyota&id=37

maybe this can help

nice project. i envy you guys, only if i have the heart to remove my reliable 7afe...... i could easily get 3sge Beams here for $1,100 and atleast $300 additional for the swap and rewire.

oh well maybe in a year or so, hehehe

Are the front nozzles are working? if so it is likely that your rear are just clogged with dirt. just use safety pins to unclogged it, if that doesn't work, could be the water hose is clogged, bent or disconnected somewhere.

also see if the switch are working properly.

hth