6G Celicas Forums

Done!

Check your PM's

I would have to look into that. If you already have a distributor in France, then I cannot interfere with thier market.


Other than that, this is also available for France. Shipping would be direct from Austria.

You don't even need the ZE! I currently still have the Probe Motor in my car. Just that was enough to make the 5.0 litres look stupid!!

Im now getting rid of it in turn for the ZE. Of course it will also be F.I with 3 PSI. Im also putting in a C.F dual friction clutch to hold those ponies in place

Im looking to sell it so I don't wanna fry it.

An mx-3 with the ZE , turboed and LSD tranny will make a mess of other cars!!! Thats 230-350 HP and a 13 second car no problem!!! That will dust LT1's, the new M3 and many other's. People underestimated the potential of th mx-3.

In terms of the Veilside kit:

Front: $325 U.S + $65 U.S (shipping) = $390 U.S

Rear: $325 U.S + $65 U.S (shipping) = $390 U.S

Sides: $275 U.S + $35 U.S (shipping) = $310 U.S

Complete Kit (Front, Rear, Sides): $850 U.S + $150 (shipping) = $1,000 U.S

I may be able to play with these figures a bit more depending on volume of course.

For those that have ordered already, I am waiting on confirmation from my warehouse in Austria of the status of parts in inventory.

I will call you before charging your accounts!

I also forgot to mention, we carry the Veilside complete kit for the Celica!
Unfortunately not uploaded to my webpage as of yet!

I believe it!

I dust 5.0 litre mustangs like they are standing still.

Its actually quite funny, they see this girly mx-3 line it up and give you the pitty look. I simply return that look.

Boy are they sucks! One guy purposely pulled over to the shoulder to avoid pulling up beside me at the next red light.

I do not promote illegal street racing, this was done ....um somewhere legally with traffic lights

TTT

as long as it has not been added to my site (www.pakfeifertuning.com) , these prices will remain in effect.

So far I have received the following orders:

madmods: rear/sides w/aluminum mesh grill
NIK: rear w/ aluminum mesh grill

The order will most likely be shiped out from Austria by the 23 of April or so. I will process the payments most likely next week when i receive a confirmation some point during next week to ensure all parts are in stock.

Anyone else interested in ordering and receiving their goods asap would want to consider including it within this shipment as importing usually takes a long time. The next shipment would propably be another three weeks away pushing that date to mid May.

For those that have issues coming up with the total amount, please contact me in private as I will definately work out something to meet your budget.

I would much rather have a full shipment arrive with goods instead of a partially packed shipment. It would also be efficient; those that couldnt pay all at once would be quaranteed the part in stock here in Toronto and ready for shipment sooner rather than having to wait until the next shipment arriving.


turboinduction:

for example, if you were to order in mid May, you are looking at 3 weeks from that date which pushes it back to the first or second week of June.

Perhaps something to consider.

Thanks for your time and have a happy weekend!

Happy Easter!

lol

im not here to rip people off. Rather, I help those of you interested out by cutting some slack; In return I make a sale or two.

I do take paypal, but usually I reserve that for small orders such as taillights and fog lights. On bigger orders such as this, I would have to refuse the option of paypal. They take quite a bit between transaction fees and exchange rates.

I do accept mastercard and Visa. If you preffer, we also accept money orders and certified cheques.

Thanks

HEHEHE.... I'd love to charge you that, but unfortunately thats not 15% off


Front / Rear Bumper / Spoiler: $448 U.S - 15% = $381 + $100 (shipping) = $481 U.S


Side Skirts: $325 U.S - 15% = $276.25 + $85(shipping) = $361.25


Complete Bodykit (front, rear, sides, hood, spoiler): $2,198 U.S - 20% = $1,758.50 + $180 to $225 (shipping) = $1,938.50 to $1983.50

These prices are shipped to your door!

hehehe, its funny seeing my car in a Celica forum..

Anywho, Just to get an idea of the interest; can whomever is still looking at getting in on this deal please post just to give me a rough estimate as to what this GB will consist of?

It seems that some of you were pretty interested, but i have not seen any recent related replies.

Are you guys that posted in the past still interested?

I believe it reffers to an air intake pipe, thats all. Basically like an aem cold-air intake.

hehehe. I need someone to post it here. I can email it to them

Its a very small clip w/o sound. It was recored with a digi and it was only a 2.0 meapixel camera.

Ill be up again in London soon to finally pick up the car and drive it back home. It needs to be tested well before I start driving it for 2 hours back to Toronto.

Email me at oscardevesa@sympatico.ca and i'll forward you the clip to upload the thread.

Hey Guys,

I'll probably be able to do better with the shipping price, I would have to see at the time of order, but potentially were looking at $180 for a complete kit as supposed to $225. For one item alone, it would remain the same price of $100. remember, there might be a duty and brokerage fee once it hits the U.S. That is the control of your government. As I said, we can fix the invoice so that the declared value is lower and therefore saving you a little more money.

Morgan, yes you are correct, you are looking at about $2,000 for everything(front, rear, sides, hood and spoiler including shipping to your city)

Absolutely no fabricating is necessay, that is a guarantee! It is a straight bolt up. Just like factory. I will refund you 100% if this is not the case.

so what does eveyone else think? Let me know your opinions, ideas and any comments.

Thanks

um.... whats that warn 0% thingy under my info?? I have never seen that before

Hey, nice to hear from you again. I just turboed my kl03. Good enough for now ! I was thinking of putting in the ZE cams, but it turned out to be too much hassle with these motors, so I said f--- it.

Thanks for backing me up! I will do everything within my control to satisfy everyone, all i ask is for patience when the ball gets rolling. These things do take time, especially when dealing with bulk orders.

I currently have a few GB's going on in www.toyotanation.com and also www.mx-3.com for Carbon Fiber hoods and trunks.

Yes we do custom C.F parts if anyone is interested...

If Anyone needs more background info on myself, don't hesitate to look around and ask the webmasters at either site otr contact me for references!

Thanks again

Hmmm.... I definately know you! Chatham = Tim Dawson??? Its definately been a while since the last time we spoke! FYI, I just completed a turbo install on my 2.5 in my mx-3. I have a little clip for anyone interested in seeing.

In terms of the Celica kit, It will speak for itself. The quality and workmanship is unmatched.

Material of the bodykits: Fiberglass finished in a white gelcoat VUP 4761 BE
(pre-accelerated, thixotropic, sprayable). Needs no extra material, fits on the original mounting-point. Most Pakfeifer Kits come with metal brackets fused into the fiberglass itself for an oem quality fit, im asuming these also do.

I spoke with a gentelman by the name of Morgan yesterday afternoon; I'm sorry but the phone number you left on my voice mail was incorrect. I tried calling you back with no success.

In terms of pricing; Unfortunatey, I do not have these pics uploaded on my webpage yet, but they accesible onthe main austrian site:

http://www.pakfeifer.com/celica_t20_i_e.htm

I'll offer everyone here 15% - 20% off the prices listed in the above link. The discount will depend on what you are ordering, quantity ordered and how many of you order.

These prices do not have shipping included, but not to worry, They will be quite modest. For example, on a front bumper shipped to your front door for $100 U.S. an entire bodykit(front, rear, sides, hood, spoiler): $225 U.S

All bumpers come with aluminum mesh grill included, im not sure about the hood if it is included, but im sure we can work out special requests.

Delivery time depending on how many are in stock is anywhere from 2-5 weeks. Brokerage fees are not included and average $55 U.S. Some people get billed, others don't see anything. Its weird and to this day, I still cannot figure out how they work. I will definately play with the packing slip and declare a lower value to help out in that aspect.

If you still require further info or i'm not clear on something, let me know!

Thanks for your time,