6G Celicas Forums

Same thing happened with me...ts not pressed on, its screwed on..i fixed mine in my autos shop...my autos teacher had a special socket tool that fit right over the bearing..then with the air gun we tightened and turned it liek a full 360 degrees using pure torque... but my problem was like at about 75mph my front end began to chake a little..then after 85 it was fine...after i tightened the wheele bearing it was perfect

great work

K well my cars exterior is finally complete..iv done a lot in one year...once i get my bros dig camera back from him at college im guna post some pics...should be soon... but any ways

I need to lower my car...with my invader kit.. i scrape a little getting in my driveway..and thats with my stock springs.... im thinking about lowering about 1.5 inches in the rear and the front... im thinking about getting aerospeed coilovers..how do they perform? Will they work with my stock struts or do i need aftermarket struts as well to get a smoother ride...the last thing i want to do is have my car ride liek crap...id rather keep the suspension stock...what do u guys think?

I agree

Does anyone have the C-one cooling panel... i really need one because my frame in the front is bent from my accident....so i need the cooling panel to cover it. Where can i purchase one of these?

Finally a 5sfe header...after taking abot 2 houres reading this long ass forum iv decided that 300 is not a bad deal...count me in... || my gt has 2 o2 censors, i beleive,..... and i think somebody said something about only hooking up one o2 censor when installing these new headers...what kind on effects can this have?

Yeah i have that same small light but its on the left side of my sterring wheel. Its deff the alarm system. As far as the switch, its most likely what they said, a switch for neons or something. Where u have the switch i have another littke light that says alarm..

lol that post was for "Planning to take off your needles:what u have2 do in advance"...see me... i wasnt planning to take the needles off so i never marked my deadpoints.....

Didnt work... My needle's dont have "Dead Points" A;ready tired that...i cant get it to those dead points.....

while installing my indiglo gauges, i carefully took the cluster out. When taking out the needles, after everyone saying dont pop the needles out, i had to go ahead and do it. I tried to be carefull but the black blastic cover on my mph gauge wouldnt come off. So i ended up accidentally pulling the whole needle off as i watched the thing inside wind down all the way. I then tried to rewind it but it isnt working. Now im sitting here with no gauge cluster and an mph gauge that doesnt move...Can somebody please help me...

Can any body tell me how to pull steering wheel off the car

wow AEM for celi.....If i am positive thsi would fit, i would deff purchase...

Today i was thinkin and i started wondering.........would u get more performance out of an intake that lets say extended out straight through your engine bay and to ur z3 fender; and you made a costum vent thru the fender for the intake,....... so as u accelerate, more and more air gets into the intake equalling more power??? its just a thought

hahah i laugh everytime i see it

http://media.ebaumsworld.com/index.php?e=testdrive.wmv

LMAO!!!!!!!!

Nice RF Punch.,.....there the best, i think

Can you have the clear turn signal lights on an aftermarket front bumper.....I have an invader front bumper on my 94(no fog lights).........will those turns fit?

GRAPHITE LOOKS ILL!!!!!!!!!!

so can you use the USB cable to transmit video?.......I have a JVC miniDV by the way, if that helps

k well I just got a digital video camera and i want to know how to get my movies of my I can put the pics onto the computer using the USB cable and for some reason I cant import the videos using the USB cable. There is a slot for a DV (digital video) cable and im wondering if i have2 buy that cable in order to import movies onto your computer.???????????

K what I ment was that its worth to get the projectors beacause it istn much more than 4 new hjeadlights. I just went to a toyota dealership and its 150 for each high beam and 240 for each low beam....than means for a set of all brand new headlights its guna be 780 dollars........... this isnt a big difference from projector head lights that are 800 dollars............now do u understand what im saying?

Well any way I unded up only getting the glass of 3 headlights because I didnt need the whole housing for the headlights and bought one whole headlight because the brackets to hold the headlight in place broke off. This came to be 450 dollars.... Which is still expensive for headlights considering brand new lets say "civic" projector headlights are only 200 for the set..

does any one know where i can find projectors for cheap??

I want two white ones......let me know when u get some more in!!

Wow....where do I start........Digndoug....dont talk about "ricey".........here let me be honest for once..........all I have 2 say is u spay painted ur stock 15 inch rims gold...........Next, Anub1s..........please dont talk ur car is completely stock .........Importceli.....its just funny how u have a stock converrtable with neons....-It just gets me mad when people missuse the word rice when they are in no positions to call other cars rice!-

Next that exhaust sounds really good..........it just proves that u dont need to get a complete and expensive exaust to make it sound good like this one does-
Keep up the good work!

Where can i find Projector high beams?