6G Celicas Forums

Does anyone know the thread pitch and length of the bolts to put the spoiler on? I have a 95 vert and grabbed a 2 post coupe spoiler to put on. Mine doesn't have a spoiler currently. Also is it obvious where to drill the trunk lid to mount it once you get the interior cover off? I haven't even checked yet.

Sorry I have no idea the color's name, I just got the car for the engine. The only thing I even have that is painted is the hatch.

Sorry, I just got rid of the car
I'll be posting pics of all the stuff I have left.

Remaining parts:
Door sills
Hatch with spoiler
Sunroof assembly with glass, motor, switch, and harness
Toyota Security module, light and a large portion of the harness
Rear speaker covers
Hatch carpet
Hatch cover
Passenger side high beam
Passenger side indicator light
Front strut brace
Tweeter covers
OEM tweeters
Trunk latch
Sun visors with clips
Driver and passenger window and lock switches
Taillights
Side mirrors
Driver's side vent
Hatch area light

Sorry, don't have any door panels left.

The cover is pending sale, and the armrest is pretty torn up, i don't think you'd want it.

Yep, tail lights still available.

Sunroof glass is good.

PM me an offer on both, I'm not sure on shipping, but I'm going to say around $150 just for the shipping on the hatch.

The armrest is not very good, interior lid for the hatch is clean and intact, as are the clips. headlights were all broken except for the passenger high beam.

The center dash piece around the radio appears in good shape.

Sorry, to disappoint, It's blue.



The radio was pulled before i got it, I'll have to double check to see if the brackets are in there, I know i have the pocket.

No, cloth seats, sorry. But they are in good shape aside from wear on the driver's seat on the left side.

UPDATE:
These are all the parts i have left. Priority goes to local pickup.


Tweeter covers, window switches, hatch light switch

Mirrors


Tail lights

Visors


Sunroof, motor, controls, and wiring

Hatch

I also have:
Door sills
Toyota Security module, light and a large portion of the harness
Rear speaker covers
Hatch carpet
Hatch cover
Passenger side high beam
Passenger side indicator light
Front strut brace
OEM tweeters
Trunk latch
Drivers side vent

Here you go:
http://stores.ebay.com/exotikleather

Just in time for winter I got a set of seat heaters off eBay to install in the vert. It ran me about $70 for a set of two that will heat the bottom and back of the seats, with complete wiring harness. Overall I'm pretty pleased with them, they take a few minutes to heat up but then keep my ass nice and toasty.


The kit came with two pads, the wiring harness, a fuse and holder, a relay, and a 3-way switch, for each seat.



I ran a 4ga. wire from the battery into the passenger compartment, under the carpet and out under the passenger seat. I'm going to be running an amp off this later, so I got a little distribution block and ran the hot leads for the seats to it.








I ran all the wires from driver's side under the center console to the passenger side.


I decided to put the switches in the center console behind the ashtray, so i had to drill a couple holes for them, 1/2" if I recall. If i could do it again, I would have placed them just slightly more forward.








The next step was to take the seats out, and remove the covers. I used WannabeGT4's How-to
http://www.6gc.net/forums/index.php?act=ST...=27699&st=0

The heating pads have self-adhesive strips on them so you can just stick them on there


.

I just ran the wires out of the back of the seats and secured them with zip ties to the underside. Each pad has a connector that locks into the harness.
I probably spent about 2 hours running all the wiring, and another 2-3 with the seats. The second seat went much faster.

I will probably end up running the power for them to something that is only on with the key on. If you accidentally forgot to turn them off you could easily kill the battery.

$50 shipped.

Finally got around to upgrading the speakers. Infinity Reference 6030cs in the rear, 6.5" woofers and separate 1" tweeters with crossovers installed in panels behind the front seats.
Did the 8 speaker conversion and put Infinity Reference 3032cf 3.5" 2-ways in the upper door spots.
I removed the factory 6.5" and will be putting some 8" subs there when I have the money. I'm still deciding which ones to get, and what amp to get as well. Any I will be replacing the front door tweeters too.











I also solved my cup holder problem:





Got it for $5 off eBay, the ring part will open or close to fit whatever size cup, it can be attached with screws, but i used a couple adhesive velcro strips. It works great!

SOLD

I have a pair of front rotors for the ST, cross-drilled. I ordered all four corners for my GT and they sent these instead of the GT ones, I did eventually get the correct ones from them and also kept these. i have had them in the box for a couple months now and am finally getting around to selling them. Part number on the box is 96499. Shipped anywhere in the lower 48: $50

Hey guys, unfortunately something has come up and I won't be able to make it out to the meet today. Sorry, maybe the next one...

This is the address I used last time;

16396 Tar Hollow Road
Laurelville, OH 43135

We ended up parking off Tar Hollow Road by the lake.

I'll bring the grill and charcoal/grilling supplies again.

Haha no. I keep meaning to do it. It's all packaged up, I just need to go to the post office. I will try to get it out tomorrow cause I really need a new one.

Finally got my lowering springs in. ended up going with the Tanabe GF210's. They're not that much lower. but are noticeably stiffer than the stock springs, but the ride quality didn't suffer any.





The fronts are in here, the backs aren't


And then completely installed and after they had been on a few days.




Also, I got some leather dye and redyed my seats.
The one on the right is done the one on the left is not.


Only the front ones for now. When I replace the rear speakers, I'll be taking care of the rear seats.

Speaking of speakers:


Hopefully this weekend.

The 23rd or the 30th of June work for me. I can't do July at all.

I'm down. And I would love to see 1MZ vs BEAMS. My 1MZ Camry is pretty quick and the reduced weight of the Celica should make it pretty crazy.

Thanks! Got some more pics: Smoked tail lights!


Washed


Taped


Sprayed


Done