6G Celicas Forums

Hello Guys/Girls

I just finished my 5sfe Swap because my older one knocked. Anyways before I started the car I checked everything from sensor connection being plugged and all fluids back in the vehicle Everything was good. So I started then popped off the rad cap to let the coolant flow and I noticed after a bit that coolant isn't circulating through the system properly and my climate control stop working, it worked for a bit until I pressed the defrost and then tried the a/c button. it just died. The climate control still has the backlight but when I press any of the selections none of them light up in bright green or orange for defrost. I don't know what it could be should I take my old ECT sensor, ECT sending unit sensor from the older engine along with the newer thermostat/water neck. Could it also be that one of my heater hose is an after market one from the local parts store and doesn't have the factory bends???

Sorry for the grammar I just don't know what to do at this point. I was so happy it started and ran then this happened. I don't know if it has something to do with a sensor that it controls the heater switch from working.

Hey Guys/Girls

I am currently installing my flywheel on the new engine and I ran into something. I removed my flywheel from my old engine and I noticed when I was about to install the flywheel on the new engine that there is an extra hole in between 2 of the bolt holes where the flywheel mounts on. So where the flywheel mounts on there is 8 bolt holes in total and a small one in between 2 of them. Do I have to line that extra hole up with something or can I just bolt the flywheel on anyway of the 8 holes. Thanks sorry for the bad grammar.

Hi everyone I was just wondering if anyone knows the part# for the 2 heater hoses for the heater core that goes from the water neck to the firewall. I am replacing my motor and while its out I might as well replace these hoses.

Thanks

Hey guys I was just wondering what valve or sensor is beside the ECT Sensor and the one beside it. The ECT has a red or brown and a blue wire then the sensor beside it has 1 wire and beside that is a green looking vacuum valve or some sort. Thanks.. Sorry for the bad grammar.

hi guys just wondering where the knock sensor is located on the 5sfe 94Gt-s.

is it direct drop in or do I need to remove anything???

Hey everyone.. I need to replace my motor and I can't find any 5sfe off a 6 gen celica. I called many Jap engine places and none have any except a camry 5sfe. Will the 5sfe from a camry work??? I was planning on replacing it this comming long weekend. Thanks

Need to replace my motor. Just wondering if anybody in ontario have a 5sfe??? Thanks

I just changed the plugs an hour ago...same thing still happens. I'll try cap, wires and rotor tomorow.

Thanks lagos

**Could it be fuel filter?

I noticed when I am driving it won't redline in 1st and when I shift into second the same thing as soon as I hit 4000 the needle just stays there and moves back down a bit as if there is a limiter. I don't redline my car when I drive I just noticed it today. **Just Changed my fuel tank, filler neck and sending unit couple days ago due to tank leakage*** if anyone has an input please share.

Thanks

Hello again ladies and gents..Got rid of my 94 red gt-s auto and got a 95 white gt-s 5 speed. Wellits kinda lame but just wanted to re-intro..Thanks

Thanks...Sounds like a plan..i'll prolly sell the rims and keep the tires... The tires are pretty good winter tires and have a lot of tread left..

Ya I am sure thats the offset, it says (offset 55 ) in the back of the rim. My boss just gave them to me because we had a major shop clean up and inventory update and he didn't want them so I grabbed it. Then I tried them on after work it looks ok but there isn't much clearance between the rim and the caliper assembly... good thing its not touching.. anyways if I do need spacers what size???

they look like these
http://josh.sitenation.com/images/subaru/wrx_rims_tires.jpg
just a pic I found online

The offset is 55 bro..Thanks

Hey guys I was just wondering if anyone knows if I need spacers or not because my boss at work gave me a set of winter tires on subaru rims 16x6.5 I tried them on today on the front and the rims look like they almost rub on the caliper assembly. Tire size is 205/55r16

I need some input.. Thanks

Ya I didn't drive it to work without. I had another car to use.

DON'T BE SO HARSH LIKE THE PEOPLE ON HONDA FORUMS.

I don't think its retarded at all, I started changing my pads early in the morning before work and as I was finishing the rear right the bolt busted and the thread was stuck I had to drill it out the next day. I didn't bother taking the bolt out on the other side because I had to go to work. So I created this topic so that maybe I could go online during my break and see the replies then just grab it at work from the parts guys. I would of took the other one off if I had time. But Yah its not good to leave it.

Thanks for the replies.

Hey everyone, I was wondering if anyone knew what the size of the rear caliper bolt is. I broke mine while changing my rear pads.
Thanks

Aight .. thanks to all that replied..

Hello everyone I was just wondering if anyone here knows why the GT-FOUR wasn't available here in North America. Please specify any important reason. I am doing a report on it for school.

Thanks

Looking to sell tein s-tech springs to any 6gc owners here in Ontario Canada. Used it for about 8 months then took it off the car.

Postert Rear Spoiler thats not a bad style spoiler.. to bad its so rare...

Nice Pictures...I can't wait for summer and for the meet...Hopefully plans work out and I can fix my ride up the way I want it to look...

I did but you didn't reply lol ya bro I can't use my car its making the noise I don't want it to break.

I am looking for Right side Cv shaft for 2.2 GTS automatic.need to replace mine.