6G Celicas Forums

I have a feeling it is 2.25" unless my muffler section has been changed, pretty sure it's factory.

EDIT: well there you go ^

Look pretty similar to regamaster evos?

http://i1349.photobucket.com/albums/p754/K...zps1aff34d6.gif[/img]

Just take this to somewhere who can make it for you, $15NZD got me 6 so much cheaper than buying them from someone

Just bought myself a set of 17" Advanti Eco Motions a few weeks ago and decided to upgrade from the plastic tyres that were on the car when I bought it. Some genius decided it was a good idea to run kingstar tyres... yeahnaaa
I've just put Nitto NT555 215/45/17s on all round and the grip! Even with beams they make wheelspinning an effort
Mind you I got them with a 20% discount cos I'm special (definitely not because a mate works where I bought them *cough*)
However if you're willing to spend a bit of coin you can't go wrong here

No worries
Have you got front splitters? Have been contemplating doing this but not sure how well it will fit

You could try this stuff? http://ezlip.com/
Might be too soft for protection though

Yay I finally have a friend suprised more people don't do it
Damn your ride looks angry! Props man!

Terrible photo but meh... it's white

[/img]

Do you mean you want it to sit flush with the dash instead of sticking out?

Ok thanks for the info
Any trouble shooting you would suggest? Might go over it on the weekend as I hate leaving my baby where I do during work without an alarm...
Lights don't flash, no chirp but remote locking still works

Hmmm is there supposed to be a blip noise when you lock and unlock? Mine only honks the horn if you push lock twice quickly.
Also do the hazards normally flash? Mine don't but have no one to compare with

What does the box under the drivers seat look like?

I noticed a black one stuck to the floor but have no idea what it is, have remote locking but no alarm that I know of.

Haha I think most things would be considered slow in comparison to that beast of an rx7 czwalga!

crap, just noticed you said st205.
They cleared my twin pots with room to spare, not sure about 4 pot but sounds like ILoveMySilly97 may be right

7"

I had a set of 17" SSR Evolution Decoltes on mine and they cleared the caliper fine with +42 offset

Email them and ask for the drawing of Part No. TY0127-4
This is for a 1994 ST202 Celica 2.0 GT

Sounds like this is the one you want but I would compare the drawing to the lines in your car just in case.

Hope this helps

I believe it was an option on some of the last models made, but don't quote me on that.
I myself have a jdm SSII and it doesn't have an LSD

Have a look around on here and you will find a thread that goes over this topic, can't remember exactly where it is though sorry

Good luck hunting

Would anyone be interested in a meet at Manfield at some point?

There is a Playday on September 14th, for anyone that doesn't know it's basically a take anything on the track fun day.

Getting them made by Goodridge, buying them through Racetech.

Must say Racetech have been very good so far in helping and replying to emails quickly, would definitely recommend them

Think I have my custom kit sorted now, one final check tonight before they are ordered. Fingers crossed.

Have you got SSII/III twin pots?
If you haven't done anything with your brakelines when mine turn up I can send you some images/dimensions if you want.

Thanks for your help

Ripped a couple of wheels off yesterday to check.
Lucky I did, fronts are about 100mm longer than the drawing they sent and the back are 50mm longer so maybe they were for drums?

How do I know if the fittings are any different? The brackets etc all look the same, but the bolts etc could be different.
To front and back to caliper bolts are 14mm and other end is 10mm.

Looks like a custom kit may have to made at this stage, so much for an easy upgrade

No luck so far may have to email goodridge themselves, surely someone has bought these before???

Awesome thanks Rusty.

Will update with how it goes

Hi Guys,

I'm about to order a full set of Goodridge Braided Brake Lines, but am unsure exactly which kit I need. Unfortunately neither does my supplier (due to twin pot fronts I think).

I have a 98 SSII, and this isn't in the database. However they have sent me a diagram. When I find out how to upload it I will.
Goodridge Part Number is TY0127-4
I will do my best to compare this to the lines in the car, however if anyone has used these before and can confirm this is the right kit that would be awesome.

Thanks in advance