6G Celicas Forums

I think me and another guy down here can do the 23rd.

so have you guys set a date yet? a few of us virginia guys are looking for something to do.

My left side skirt is pushed out from the door pretty far too, the right side tucks in far enough to not see the edge with the door closed. I may try the bracket fix and post pics of that soon.

I put the 404a kit on my 97st last weekend.

Do you have any info on it? I checked the park website and didnt find anything, Ill probably go down there.

Read this if you want to know more about acetone as a fuel additive.

http://www.lubedev.com/smartgas/additive.htm

Found this a few weeks ago on newstoday.com, havent tried acetone yet, but the research is convincing.

yeah, but they are cheap, you can buy them in bulk at pet stores. keep a couple extra floating in the arm rest compartment

Pull out the bulb, fill it up the rest of the way, insert a beta that fits your exterior color scheme.


it'll be bangin

Thanks Coomer, much appreciated.

I think it was about 16 dollars. The bottom line is that I like it for my car and I dont get condecending about the mods on other peoples cars and would appreciate the same treatment. I do want to wire it so that I can toggle between the two speeds, I understand that people arent used to seeing a blinker flashing this fast and I dont intend to keep it in 6x speed in normal driving, but if Im with friends out at night I would like the option to switch speeds for my own personal pleasure.

The blinker is the same type as the stock one to be best of my knowledge except for the speed. Its made to replace the existing relay.

And if you dont like it Ill remember not to signal before I sideswipe you. j/k

I love all you haters.

Ha ha.

I was expecting to get that.

Thanks.

I have the stock blinker relay and a 6x blinker relay. I want to wire it with a switch between the two relays so that I can switch back to stock speed if I find myself getting tailed. Has anyone done this?

Any image should be fine as long as its 300 dpi at the calendar size plus bleed. If the calendar is going to be 11x17 with a top half image in an 8.5x11 area it would need to be 3300x2550 plus some if you wanted it to bleed over the edge. You can also have them made inexpensively at cafepress.com, people could order them independently of the 6GC site and the profit would go directly to the shop administrator. Let me know if you guys need any prepress help.

The only thing I would caution is scanning in an image that was previously printed, a photo is fine, but if it was a printed image the scanner pattern and the printer pattern will cause a moire effect on the image, like if you put two window screens together and rotated the front one.

Ive got a double deck that Ill be pulling out in the next few weeks. If you get no other offers hit me up, Ill have it on a shelf otherwise.