6G Celicas Forums

thank god, issue was fixed. sorry i havent been on lately to reply back. it seems alls i really needed was a good machining of my rotors.

okay, i didnt really know where to put this, but since it had something to do with my rear toyota emblem, i decided to put it in here. so my rear emblem fell off about 3 weeks ago when i was washing my car. i didnt think much of it, but when i checked my trunk today, i noticed that my trunk mat was wet, so i looked underneath it. my spare tire dip was filled with water and it was beginning to seap underneath the rear seats. i guess its from the two holes that you stick the emblem in cus theres another hole leading into the trunk on the inside of the hatch. wtf haha. they just had to put a little hole in there for nooooo reason

no, no grinding noises. i just had an oil change last week and they said they put brake fluid in there, but the light still comes on. is there something wrong with the sensor maybe?

and if i did replace my rotors, would it be all four, or just the fronts?

how much should the rotors run me?

ive been having this shaky steering wheel problem for a while now. Everytime im at a speed, lets say 40mph+, and i hit the breaks to slow down, my steering wheel gets very very shaky. is this normal or does nobody else experience this? i figured it could possibly be an issue with my rotors being warped or something to that extent. other than that, i have no clue.

also, my e-brake light has been going on and off for quite a while now. it will stay off for a little bit, but after i speed up , it turns back on, then it stays on for a while. and no, my e-brake is not up.

if anyone could help me out with either of these problems, it would be greatly appreciated.

has anyone actually been down to destin during spring break?

haha. its about 45 minutes away from panama city beach, fl. it should be fun, im just tryin to figure out what its gonna be like

me and about 8 or 9 of my buds were thinkin about headin down to destin, FL for spring break in march. being that we are college students, i was just wandering what to expect. will there be a bunch of college kids down there? does it even compare to PCB? lookin to get hammered and meet lots of girlsss. is this the place?

oh yea, if it helps on the info...were rentin a really nice beach house. figured it would be a good way to meet girls then bring them back to chill and other stuff hhahaa.

where is the engline plate located?

today i go to turn my car on after it sat in the driveway for 2 weeks and it wont start. the lights dont work, i when i turned the key there was no sound at all. i tried flicking on my hazards and they wont work. i have an auto and when i turn the key to the on position, i cant even shift out of Park. anybody know whats going on? had this problem before?

it's the veilside bumper or lookalike without the bottom part...it comes in 2 pieces

wow...i love those wheels. they look really nice on ur black car. mad props for the wheels, i was actually wanting the same ones for my red celi

check the bolt that screws in ur spare tire...mine was doin the same thing...try it

is the DEH-P6700MP considered premier.....i think i want that one now

i need to get a new deck. my car is red with all black leather interior. i was lookin at the alpine CDA-9851 for about $220 and the pioneer DEH-P7700M for around $190. what can u tell me about either of these decks. also, would the silver face w/ blue glow look wrong on my car? please respond asap

but what black decent decks are out there?

he said something about clipping tho, he said i didnt even have to buy the hu there, they didnt even have a good selection....he said that underpowering them would eventually clip the speakers, meaning the cone would stick to the magnet due to friction

ok. about a month ago, i bought 2 pairs of polk audio db650s from circuit city and the guy told me i'd be fine with my stock head unit (LIAR). after about 3 weeks i installed the backs. i didnt feel like doing the fronts, so i took it to a local car audio shop and said i would clip the speakers if i ran them off my stock deck. he said that underpowering them is as bad as overpowering. i wasnt gonna buy a deck cus i like the stock look on my all black interior, but i was wondering what black mp3 decks are out there for a reasonable price, and where they can be purchased from. any pics will help. thanks.

btw- circuit city SUCKS!

ohok i see what you're saying. sorry i cant b of any help.

check out my topic karaba. i have the same problem.

its titled rear speaker install, first at top as of now.

i think ill just make some brackets for the fronts then.

ShadowFX Posted Today, 08:36 AM
i bought these spacers for my fronts to fit 6.5"s,
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...ssPageName=WDVW
and they work fine, would these work to fit 6.5"s in the back too? or is it a completely different thing?

i dont think they would fit in the back cus its like a rounded square opening and its too small for the speaker, so u would have to girnd something.

gonna start the project today. ill keep u posted and let u know what went down. thanks for the replies.

how about the fronts, were there any similar problems with those?

yea. haha its gonna be a job but if that's what it takes, then u gotta do it.

any other suggestions would be appreciated.

alright thanks man, we were considering that, but just wanted to see what everyone else was doin first. thanks.