6G Celicas Forums

today i got new struts put in today. no more stupid scratching noise. turns out the kybs i bought from jdmwers was right after. the only thing was he sent me only one circular nut to tighten the strut cartridge to the shocks and he sent me to Right rear. atleast now i got extra strut cartridges and a Right rear shock. So when i need to replace them again all i need is the left rear and another circle piece thing so i guess in the long run everything went alright. thanks everyone for their help. peace

yea i put motor oil in it. but that doesnt help either way i dont have the bolt or nut to tighten up the strut csrtridge to the struts. man i drove my car to work today and when i hit a lil bump my car becomes like a low rider bounces up and down. im getting the parts tomorow and ima put it on thurs. i have to fix this before it damage my car.

man me and my uncle tried to put on the shocks today. and well everything went wrong. first the shocks that were for the rear. the ebay dude i got it from (jdmwerks) sent me 2 right side. that sucked. and for the strut cartridges for the front. Well we got them in the shock holder but the circular piece that is suppose to hold the struts onto the shocks tighly didnt fit but i still put it on like that. and now my car makes a metal tapping sound when i hit bumps on the road. i think ima just got to the dealer ship and order the front shocks and struts. that wayil know itll fit. and im gonna go get the left rear shock also. hopeffuly everything goes to plan

i mean for the front. i just cant put the tein s springs over the cartrige can i?

so the shock inserts that are suppose to go in the front, i should take the old insert out the stock shocks and put these in and for the rear the new shocks and inserts should fit perfectly right? Thanks for the step by step page.

hey thanks for the tip soulshadow. yea i mixed the front and rear shocks up. ill try to put it on again on sat thanks man. later

I bought these kybs off ebay. There was one problem on the side of the shocks where the two holes that are supposed to get drill back to the rotor or piece it connects. The holes are to far apart? those two holes are also further apart from each other comparing to the stocks shocks i took out. did anyone have these problems.

can someone give me the part # for teins springs and kyb shocks that will fit a 94 celica GT 2.? The reason why i am asking is because i bought both of them off ebay and apparently they dont fit. i was told the springs are to big for the shocks. the teins springs are on my car now with my stock shocks and i know thats not good. so can someone help me out thanks.

i got the top piece of the antenna but i cant find a manual motor antenna for the piece. where can i get one?

im trying to do a swap and need a fwd tranny. what tran would you guys recommend? right now it is only the front clip do i need the rear to make the swap work? the person told me i need the belts etc and the fwd because the 3gste is awd is that true that i need to get a fwd.

i was told a hold must be drilled to fit the strut bar. where do i drill the hole?

where can i buy a manual motor antenna so i can hook up my new s200 type antenna? any suggestions thanks

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMEWA%3AIT

would this header fit our car? im not sure what off road means.

I bought these kyb gr2 off ebay along with the tein s springs. For some reason they dont fit. My uncle told me the springs are too small for the shocks. so instead i just dropped my car with the springs with the tein s and the stock shocks. any idea why they dont fit?