6G Celicas Forums

so i got the mounts and everything but i still need the extra thing that covers up the double din slot. toyota wants to charge like 30 somethin bucks for the one with the door, would anybody happen to have the part number for the one without the door?

thanks guys. i think i'm heading off to the toyota dealership today to get the OEM mounts and i'm gonna swing by best buy and ask them for the same piece they used to fill the extra slot from my other pioneer stereo.

oh, and another thing while i'm at it, my stock alarm system is disconnected (it was when i bought my car) how would i go about reconnecting it. i don't really know much about the stock system and i do not have a remote or anything to turn it off, so i'm pretty lost.

so could I get summed up exactly what I'm going to need? Since everything got stolen basically, it'll be like starting from scratch. I'm aware that I'll need something to fill in the double din slot since the stereo is only a single din. I know best buy sells something that does fit, because they gave me something when i had my stereo installed there in the first place. I also have a wire harness adapter and i already have everything taped off, all i need to do is solder for the most part.

Edit:


The stereo


heres the back, for the little blue circle auxiliary input could i take an auxiliary cable from that and plug it into my ipod? i don't feel like spending 50 bucks on a stupid ipod interface thing.


all of the wires on my wiring harness adapter match up perfectly except the system remote control wires, should i cut the wire coming from the Pioneer wire harness and solder it to the harness adapter? the ground wires don't match up either but i understand both of those will need to be separately grounded and the mute wire i'll tape off or something

well, the OEM mounts got jacked with the stereo. can i just buy something like this? http://www.bestbuy.com/site/olspage.jsp?sk...d=1051384099285

well, what all do i need to buy? i had best buy install my first after market stereo, so i have no idea what they did. i just got that one stolen, so i figured i'll save some money by installing everything myself.

I just received my new Pioneer DEH-P7800MP and I have a harness adapter already but I was wondering what mount do I need to buy?

is this still available?

do you have the plastic covering that goes over the gauges? mine seems to have some massive scratches in it.

I had an itrip... i didn't like it, the sound quality was absolute crap. i guess it depends on how big the city or town your in or by is. the bigger it is, the harder it will be for your itrip to get an empty station that will actually work without a bunch of static. atleast that's how mine was, i could've had a poorly made one.

Full time high school student and i also work at hollister. pfft, retail sucks. i'm trying to get into college for architecture, but i'm only a junior, so it'll be a while.

Bump

i've been having the same problem... I had all belts, all to my knowledge atleast, replaced so i wonder if maybe they just need to be tightened up again? The belts were replaced like 6 months ago though, so it could be something else. maybe something small i'm looking over??? maybe my tires aren't inflated enough?? ah, i have no idea. any help is appreciated.

maybe i should just tell my parents my engine and tranny are shot and they should buy me a 3sgte

that dual exhaust is hoooot

niiiice, i've got a guy who can paint some parts for me, instead of painting the entire thing... which will costa an arm and a leg. so i plan on getting the SSIII fronts, some OEM sides and i dunno what kind of rear lip and possibly a TRD replica wing. i'm kinda clueless on what i want for the wing and rear lip so any feedback is welcome.

so uh, where did you find this awesome deal??? cause i need some fogs too

So SSIII splitters should bolt on the front, and i'll probably need to use some adhesives and whatnot? so could i get a flush look without having to use a bondo or something, cause i don't feel like having my bumper resprayed. also, does the same apply to ANY rear lip? thanks!

Okay, well I've done a little research, but i've probably overlooked this, and i'm definitely not the most mechanical suavy kinda guy so how exactly would i go about getting the SSIII splitters on the front, some OEM side skirts, and a rear lip fitted. Do they just bolt on without and use of bondo or anything. Whatever I can do myself, besides the actual painted will help, because i'm a broke high school kid. And for you guys that have the splitters and such, do i just order them through a toyota dealer or what? any help is appreciated, even if you guys just give me a link to a how to or something

i want to swap a manual tranny into my celi too, but i might as well wait until i get a 3sgte... kill two birds with one stone. if you have money and you want more power, you might want to do that also.

This is how things go down in Indiana

my girlfriend and i

sweet jesus... that's a fast celica.

hmm, were you located towards the northeastern or northwestern part of IN... reason i ask is because i live in the northwestern part, about 10 minutes from Notre Dame.

alright, thanks.

would you happen to know which part of indiana?

"Slow"

that's what i was talking about ^^^^

how much is the USD? i'm foreign currency retarded.