6G Celicas Forums

hello people over the weekend ive noticed a vry strange creeking noise it sounds as if its coming from the right hand suspension the noise is like 2 bits of rubber ruben together if u no wot i mean any idea's wot this could be ive currently got the teinn adjustable set up on the gt4 maybe nut on the top mount could do with tightening?

thanx craig

ya im gonna check them tonight m8 also if there is a sensore down and a code stored will that stop the abs working all together? or does it just stop that senssor from working? cause the abs does not work at all. and like i said the guy tested the abs pumped and its fine and he thinks there is a fuse some were in the car that as gone?.


Thanx vry much craig

well guys as u no from my last post i had my clutch changed on my st205 and ever since then the abs light as been on now i use to here the abs unit kick in when i turned the ignition on but now all i can hear is the reley unit clicking when i turn the ignition on well i took the car back to the garage were i had the clutch done and he thinks its a fuse thats blown some were because he tested the abs unit its self and it worked so my question is apart from the 3 fusses in the engine bay are there any more any were else on the car? or do u think the guy is telling me a bunch of lies? also does any one have a wireing diagrame of the abs unit?

thanx craig

also if there is a wheel sensor that has had it will the abs unit still work or will it shut its self down?

ya but i did'nt do it like it said in that pick so im gonna try it again when i get in wot i did was with the ignition off pulled the fuse out bridged the connections then turned the ignition on like i said it did'nt do nothing just stayed on constantly but ive just been going over that web site and it says with the ignition on pull fuse and then bridge the connections. Also another thing m8 before i had my clutch done i use to here the abs unit kick in when i turned the ignition on but now all i can hear when i turn the ignition on is the reley box clicking its ass off.


thanx craig

well i checked for codes on the abs last night and the light did not flash it just stays on constant. any idea's peeps?

thanx again craig

how do i check thos m8 the same way u check the engine codes? Tc and E1 terminals?

thanx craig

only problem is m8 ive got an apexi ecu m8 and ive tried to look for error codes before but it wont show them the cars going back to the place i had the clutch done on saturday so will have to see wot they say if worst comes to worst im gonna have to take the bulb out

craig

how are u all? well i had my clutch replaced yesterday i went to pick the car up as i was driveing off down the road i looked at the dash board and bam there it was the abs light was on so this moarning i had a qwick look over the car i had the hood up and normaly when i turn the ignition on u here the abs pump kick in but nothing apart from i could here the reley box clicking away. Any idea's people?

Thanx Craig

oh sry thanx for the part number.

craig

does any one now the part number for the little clips that go on the brake pads to stop them moveing inside the calipar?

Thanx craig

Hi well at the moment its one thing after another but any ways.
I was driveing work this moarning and put my foor down in 3rd once the turbo had kicked in the revs shot up to 4000rpm and it sounded as if the revs were getting higher but the car was not really going any were would this be my clutch slipeing?

Thank u Craig

i think ive sorted the problem now it looks like with the dump valve being new it just needed freeing up cause i went home at dinner time and i kept driveing so the dump valve was kicking in and its seemed to off freed up now. Ill keep u all updated.

thanx craig

Well after going down to the local drag strip at the weekend all the big names were there with there products so i got my self a baileys dump valve any ways i got back home last night and just had to put it on once all fitted i started the car up it was fine took it for a run spot on this moarning i took the misses work whilst waiting in traffic and out of gear the car started to idle funny the revs were going up and down between 900rpm and 850rpm any ways after driveing back home i parked up and the car idled fine but then comeing work its doeing it again. Any idea's wot could be wrong do u think i have a vacume leek some were? or is it a comman problem when u fit a dump valve?

thanx Craig

lol guys u think u have it bad with insurance u should try and insure one over here im currently paying £1200 witch is wot about $1600 dollers? im 21 0 accidents 0 indorcements.

craig

well guys i got home last night let the car cool down and toped the ic up reset the ecu and Wella BOOST IS BACK! WooooHooooo i think i worry to much! lol thanx for all the help guys. Also i did not relise untill i went to check for errore codes the car as a Apexi Ecu on it as well so it wont check for codes Bah! ahh well all i need to do now is that my dump valve sorted then the car should be runing 100% spot on again.

Thank u all again Craig!

thanx for all the info guys and that other post is a vry good one ill try that ic thing l8r when i get in form work. ive read that the level sensore is vry sensitive? and ive noticed i could do with some water in the ic so maybe fingers crossed it might be the water level. once ive toped it up should i reset the ecu?

craig

thanx for the quick reply m8 when u say u should feel the pump kick in were abouts should i be feeling m8? also if i have to ground the ecu i can do that through the level sensore switch cant i?

thanx craig

right peeps i think i might of sourced the problem out with my low boost just latley for the people that have not read my last thread here is a quick run down.

first bought the car boost use to run at 1.2bar over time this as creeped off now the car boost's at 1.1bar but just l8ly the car as been playing up it will only boost to 0.5bar now when the car is cold it will boost at 1.1bar but once the car gets warm thats it she only boosts at 0.5bar.

now do u think its the code 54 that is playing my car up? if any one else as had this problem please tell me how u fixed it?


thank u craig

lol cheers m8 100$ hey mmm not bad think ill go have a browse now ill let ya all now.

thanx again craig

thoght it might of had something to do with that. god just before christmas as well £280 for a hks ssq one best ask the misses for an early chrimbo present.

i have checked it a couple of times but not codes on there also ive blown the stock dump valve up its acturly come apart so its like in two peaces do u think this could have something todo with my problem?

thanx craig

Right guys ive got abit of a problem now and then the car will on produce half of the boost it should be runining at so wot i mean is it should run 1.2bar but over time this as gone down and down now she runs about 1.1bar of boost but some times she will only run 0.5bar of boost do u think this could be down to a sticky actuator? (my car is a st205 94 reg).

Thanx Craig

currently runining 1.1bar gonna up her l8r on in the future once ive done some more mods.

out of everyone on here no one now's how to work them? any one plz?

right people ive had my st205 for about 4 monnth's now and ive got TRD Recordable guages in it now my question is as any one seen these and HOW THE HELL DO U WORK THEM! lol any help plz people.






as u can see in the top pic they r the guages now in the bottom pic thats wot they wire upto


thanx craig