6G Celicas Forums

So a coworker of mines dad lives in africa and he imports/exports cars, he said it would cost about 1500 to get the car to the USA.
Thoughts on this? How difficult is it do import cars?
And how expensive will this be.
Thanks
-Chris

5sfe one works correct?

I ordered the oem exedy clutch and im going to resurface my flywheel. Should be solid.

Maybe ill go to oreilies and get the OEM one. haha.

Really? nice, i know i need a 5sfe one, just thought i needed a stage 1 or 2, i ended up ordering a f1 listed to hold 228 feet pound torque.

How is this?
http://www.amazon.com/F1-Racing-Stage-Clut...=f1+clutch+5sfe

Alright, so i have no clue about what clutch is decent or not, mine is slipping so its time for a new one since my clutch master cylinder is new, so thats not why its slipping, im going to have the OEM flywheel resurfaced. But now for the clutch kit... when i go to ebay to find one all i see is brands like FX, ECM, PPC, Kuup and XTR, are any of these decent brands?
Im looking at getting a stage 2 one as i make more power than a 5sfe. just dont know which to pick. Any help?

Thanks Chris.

His site is down?
Is he still selling the LED dash kits, anyone know?

I thinj certain ones you can. I found an odd website selling them from china for 40 each. Has good feeback for the seller but ive never seen the site before. It was like ali express

Need 4 3sge redtop pink injectors.
77479

Well the o ring parts all match mulmultiple engines so could a 5sfe one work?

Would these work?

http://www.ebay.com/itm/Toyota-Celica-MR2-...3ed&vxp=mtr

Yeah my buddy who knows more about this than me did them. Still only the one is spewing out.
But the 5sfe o ring fits?
What aftermarket ones will fit then? or from other cars
7MGTE?

One of my fuel injectors in spewing out gas, i replaced the seals and o ring with some off a mr2 turbo. And one of the injectors is still spewing out. I think the injector is bad. Can i also use the mr2 turbo injectors them self?

It worked, thanks you both, Khaos that was an excellent explanation. let me right to it.
-Chris

Thanks guys i just got from the junk yard. Im about to pilfer under there. Ill report back.

Yeah i've taken off the intake.

What would you take apart to make it easier to see? everything is plugged in that i can see, ive gone over it multiple times.

any particular part of the trans?

nvm, on top... hmm

I have a connector i don't have plugged into anything, i'm thinking maybe that's why i can't get my speedo to work. it has 3 wires in it, they are red/blue middle wire is blue/black and the left wire is blue.
It is located near my MAF and under the throttle body. The engine i have is a 3sge redtop. Anyone know what my unidentified connector might be?
Thanks
-Chris

No LSD

I don't i didnt have space for it. I like the beams but i want the gte. Sad but true. And dude. I cant sleep all i think abouts an mr2. But i want to keep my celica. Gotta choose one.

Thanks. Im only askimg 2800 obo.

Hey guys, i had a lot of fun working on this car and toying with it and learning about how toyota is the best! Sadly though all i want for christmas ( Not really just in general ) is a damn MR2 they are so sexy! So im trying to trade or sell my celica.
Its got 280k on the Body and 60k on the engine, new mass airflow, new axles wheel bearing 2.5" custom headerback exhaust with no cat. 8k HID lights, and a few other things.
It still needs GT power steering lines, reservoir, and the tach needs a 10 0hm carbon resistor i believe, and i am not sure why my speedo doesnt work, it did before the swap and still should after.
Thats about all, if anyone has any interests please let me know here is the CL add: http://houston.craigslist.org/cto/4772619980.html
Im open to reasonable offers, and almost any MR2 91-95.
Thanks for looking.
-Chris

Hey all i need an extra pair of 3sge redtop headers, if anyone has any let me know. Thanks
Shipped to 77479
-Chris