6G Celicas Forums

Also remember that the Grey Tops from the RAV4 G Limited and Caldinas are AUTO which means you get a AUTO ECU, not cool if you want to use it in your manual car, it will work just does as good as a manual version!

Hey matey nice to see others are putting this into a 5th gen as well!

My swap is already completed so feel free to check out the complete writeup here:

BEAMS Red Top Conversion Into ST184 Write-Up

Happy to help out!!

Right next to the EFI relay at the bottom, should be label ST

I'm putting a 98 BEAMS into my 5th Gen Celica and had a couple of questions I couldnt work out:

1) The ST relay (Starter Relay yea?) what does this do as I have 2 wires running from it and cant work out where they go in my engine bay, if I even need them that is?

2) I also have 2 wires running down from what looks like one from the ECU and one from the motor side. The colours are black with a red line with silver spots on them any idea what they are for? I was thinking maybe ignition as they both run into EFI relay I think.

Hope someone can help, dont know the 6th gen layout very well!!

Yeah buddy I was just going to have the writeup on my website of what process I went through! My current write-up is on OZ Celica under 5th generation if ya wanna check it out from a 5th gen Celica point of view. Still working out alot about this motor myself but yeah I can send some BEAMS graphics, titles etc your way if you want to spruce your site up a little more!

Great idea mate with the site this motor needs one!!

Dont know if anyone has put BEAMS into a 5th gen before but I've done it (almost, damn wiring) so perhaps I could share some knowledge your way once my own new website is up and running!