6G Celicas Forums

Bump... anyone got a set. I found a few sets in junkyards... but they are all out of state

Alright... my bad... i tottally forgot that i replaced the fuel filter already.
I'm waiting for my parts to come in ... so probably tomorrow i'll stop and get a relay and see if their is any difference.
I tried pulling codes on my car today.. and it said that their wasn't any stored codes.

I already replaced the fuel filter and it didn't seem to make any difference. The fuel pump is only a year old... so it should be working fine. Is there any way for me to test if my tps is working... resistance test or something?

I'm looking for a set of OEM Side SKirts for my 95 coupe. Please let me know how much your looking to get for them including shipping.
thnx smitty2145

Alright... I have been having problems with my car sputtering and stalling out on me for a few weeks now. This only happens after the car is brought up full running temp. When the engine is cold and i start it up.. it seems to run fine... I can drive it for a few miles... but then after i come to a stop sign and idle it has problems accelerating... it will start to sputter and sometimes it will stall out. most of the time it will start right back up... but sometimes i have to let the car sit for 5-10 mins before it will fire back up again.
Here is a list of the things that have been replaced withing the past 21 days

-Plugs
-plug wires
-dist. cap and rotor
-ECU
-thermostat
-a few of the vaccuum lines

I just ordered a new Vac. modulator and idle air control valve.... if anyone else has any suggestions please let me know... i love my car and it is really starting to piss me off that i can't drive it around reliably.
thnx
-smitty2145

I have been looking for a set of oem side skirts for my celica so that i can get the rest of my body work done, as well as instaling my front bumper all at the same time. If anyone has a set of OEM side skirts for sale or knows of somewhere i can get a set for a decent price let me know.

thank you
smitty2145

Bump... i appreciate the websites. If I can find a set for 200$ and cheaper... that is the price range that I was looking for. Anyone have a set laying around?

I am looking for a set of oem side skirts. If anyone has a set laying around or knows where i can get a set for a decent price let me know. I would like to pick a set up here pretty soon, so i can get my bumper and the skirts prepped and painted at the same time....
thnx smitty2145

If anyone has any OEM side skirts that will fit my 95 celica gt coupe. Let me know.
or if you know where i can get a set for a decent price.

I am looking for some Oem Side skirts for my 95 celica gt coupe. I am also looking for a drivers side door... i have had some rusting going on at the bottom of mine. If anyone has anything send me a pm and let me know the prices.
thnx
smitty2145

I want to buy a set of OEM SIDE SKIRTS for my 95 celica gt coupe. If anyone has any for sale or knows of a junk/ salvage yard near them. Please send me a pm. Thank you.

-smitty2145

If anyone has a set of Oem side skirts that they are looking to sell or if they know anywhere I could get a pair for a decent price, if you could send me a pm.. that would be great. I looked up price's at my local Toyota dealership and they are a few hundred more than i would like to spend.

well thnx for looking
-smitty2145

Does anyone know what needs to be modified with the 96-99 turns so that they can fit into the c1 kit. And also what modifications need to be done to the impact bar?

Hey,
I just purchased a c-one front bumper replica and brought it into the body shop in my town and they told me that some drastic changes would need to be made to my car for this bumper to even fit. a few things that they listed off included: cutting the fenders, removing the impact bars, getting new turns and side markers, as well as making new brackets for the headlamps. I was wondering if anyone knows of any c-one or zyclone bumpers that have good fitment and that don't require extensive work.

-smitty2145

Hi,
I just purchased a vis zyclone hood and a C-one replica front bumper and have been trying to decide on a set of side skirts. I want something with a stock look without paying rediculously for trd skirts. Tell me what you guys think about using a pair of Zephyr skirts with the combination of my hood and front bumper.

any suggestions would be great.....

If anyone has any other idea, feel free to post

-Smitty2145

I personally wouldn't go with that color black. I woudl look for something hyperblack in an 18". Hyperblack V-spoke would look very nice on your car.

I just purchased a carbon fiber zyclone hood as well as a c-one front bumper. I am looking to get a set of side skirts that would go well with that combination. PM me if anyone has anything for sale.
thnx
Smitty2145

Dang, just got my carbon fiber hood yesterday from Vis.... i was afraid that during shipping it might ahve been mest up, but after 30 minutes of tearing through boxes and packaging staples i knew it was fine.

Damn it looks sharp, cant wait to put it on.

Hey,

I've been looking around my area for a few weeks now and haven't come up with anything.... I own a 6th gen and have been looking for a second one. I was wondering if anyone has a 6th gen with some front end damage (front bumper- hood - radiator) need to be replaced. If anyone has anything like this or knows of any in there area... send a pm my way with the info.

thnx smitty2145

I have 5% on rear and both rear windows and 35% on front windows and both top and bottom window strips on windshield. I have pics up in profile if you want to take a look .... my car is also black... so if you want a good idea of what it looks like take a look. I have gotten pulled over once for the tint and i told the cop the front windows were stock tint and he let me go without a ticket or (R&I) havent had any problems since.

It really depends on what you want done and where you go.

if you are looking to do jus the rear window and rear 2 , anything around 100-110$ is a decent price. If you are looking to tint all windows except windshield, I wouldnt pay anything more than 160$. If you want a Front winshield strip 30$ for upper and another 25$ for lower.

hopefully that helps you out

I just installed the fuel pump last week because my car is in storage. the reason is because i have a
5sfte is in the works

i have:
ct26
bov
Fuel Controller

none are installed....

i've been trying to locate good deals on the rest but haven't come up with any leads....
as for the auto to manual swap.... I've been toying with the idea. but, If I turbo my coupe... i think i'm gunna stick with the auto tranny as long as it will hold up to the power.

Thnx For the Comments:
As for the Exhaust.... its already been fixed... about a month ago i got it all re-piped and it was pushed in about 2 inches and not at an angle.

The Clear Corners-
I got them custom made by a 6gc member
I believe his user name was FallenAngel

I know the seats need some work... but i've been putting that off for some nice leather racing seats.

I believe someone told me to lower my ride?

-I have it dropped already
Kyb gr2's
DF210 Tanabe Drop Springs (2" drop)
St185 swaybar links
pillow ball mounts

thnx again

Howdy,
I've been a member of 6gc for about a year now and owned my 95 celica for a 1 1/2 years. I've been working on it off and on since I bought it. If you could, please check my profile look at the pics and parts info. and let me know what you think I should do next?
any suggestions are greatly appreciated
thnx
smitty2145

If it's a 2nd gen 3sgte manifold, i'm pretty sure that one fits the 5sfe then i'll do it for $50.