6G Celicas Forums

As the title states, set of boomer fiberglass side skirts. They aren't made anymore and have never been installed. I plasti-dipped them black for mock up once but forgot to take a picture and never installed. They've since been sitting on a shelf in my garage. Needing the space back so they're for sale.

I'm located in Cincinnati, OH 45248. I can probably ship them just might need an extra day or two to find the right box.

I found a picture (not my car, credit to..?) of a 6gc with them installed --



I think I paid $200 for them, but I need them gone so $100 obo +shipping, thanks.

Yep took deposit. Rob is a great guy and as much as I'll miss the car I'll be glad to know it is in good hands!

Unfortunately it's time to sell my toy to provide a down payment on my wife's new car.

This car is 22 years old and it's far from perfect, but here are the details as best I can remember them.

Performance
2nd gen 3sgte swap ('91 mr2 turbo)
-block: hot tanked, honned, replaced freeze plugs, decked & painted
CP pistons, Eagle Rods, ACL bearings, ARP studs, rod bolts & flywheel bolts
-rebuilt head, hot tanked, decked, new valve seals, cometic gaskets throughout, new valve cover & bolts
-NGK spark plugs, Magnacore wires, new timing belt, tensioner & pulleys, new high power 160amp alternator.
-new oil pump, Walbro fuel pump, water pump, & fuel filter assembly's & koyo radiator w/TRD t-stat.
-poly-filled gt4 motor & tranny mounts.
-LSD, just replaced trans fluid with Redline MT-90
-fidanza lightened flywheel, f1 stage 2 clutch, new throwout bearing & redline fluid
-3" downpipe (no cat), front mount intercooler, 3" straight intake to K&N air filter
-JDM mr2 ECU
-EGR deleted
-cold start injector deleted & replaced with Intake Temp sensor in preparation for stand alone ECU
-Enkei RSV bronze 17x7 w/ Hankook Ventus HRII h405 215/45/17 tires
-rear disc conversion including, stainless steel brake lines, drilled & slotted rotors, new rear wheel bearings
-Front Lexus ES300 2 piston Calipers, GT Rotors & Stainless Steel lines

Suspension
-D2 Coilovers
-Suspension Technique Sway-bars
-Megan front strut bar
-GT4 rear strut bar

Exterior
-moonroof shade
-clear side markers
-completely stripped & repainted/clear coated black engine bay to match engine
-hood struts
-stripped and resprayed underside in rubberized black
-6000k HID's in lows

Interior
-6.5" component alpine type-r's (front) and6.5" alpine type-s (rear)
-7th gen black perforated leather GTS seats
-7th gen 3spoke steering wheel
-Sabelt 2" 4pt race harnesses (not completely installed)
-pure white cluster LED conversion
-Vincents black-black leather accessories (arm rest, shift boot and e-brake)
-"custom cup holders" (lol) relocated to inside console
-clear (Tundra) courtesy door lens covers
-battery relocated to trunk

I have a multitude of spare parts I will provide including but not limited to...
Stock 15" BBS wheels painted white (no tires)
Complete RHD dash
Megasquirt PNP standalone ECU
Kingua adjustable turbo waste gate
Apexi muffler, Incase you prefer it to the installed Vibrant muffler

No radio, interior currently removed from car but can be reinstalled or included.
Power doors, windows & moonroof all work fine.
I have title in hand.
It is easiest to contact me by text (or call but I probably won't answer so be sure to leave a message) @ five one three - 379 - zero4three8

If I don't post pictures soon please request.

bump

armrest is a no-go, but I do have ALL the seat belt mechanisms. Which one did you need?

RHD dash from a JDM GT4
Entire interior has to go too.

Make offers, you'll probably need to pick up as it is very large and probably unable to ship.
Thanks

Interested in the ST205 'vin' plate that is riveted to the firewall. (top left of your 4th picture down)

Oh, and if you end up hacking it up or selling it for scrap, I'd also be interested about 12" of the wiring that attaches to the back of the gauge cluster with the clips. Thanks.

PM sent.

Anyone know if this fits 2nd gen 3sgte swapped celicas?

Use the search function. This has been discussed dozens of times.

my set of leather 7gc seats didn't have airbags? Do you have a picture?

low beams or '96+ front bumper?

Are these different than the 94 & 95? I know the seats rails were a little different...

I would be awfully surprised to see the car go for that kind of money. $12,500 = perfect kbb value of the car + swap + aftermarket mods @ retail price. Don't get me wrong, I think the car is fantastic & I'm totally jealous but I'm thinking it'd be more realistic at $9,000. I say this because if you're the average Joe and you're looking to spend $12.5k on a "sports car" you could buy a Honda S2k, a 350z, Audi TT, Golf R32, BMW M3 (E46) or even import a real GT4 or a Skyline GTS-T for <$13,000.

WOW this is a steal! I might just order a couple spare sets! ha

Need '94-'99 Celica GT front caliper brackets shipped to 45248.

bump ttt

95 ecu
95 harness

I have both of these for a '95 ST and you have a PM.

sorry local pickup only. too expensive to ship.

bump?

Need the front caliper brackets to 45248. Please PM me.

price of front brake caliper brackets shipped to 45248. PM me. thanks.

Smart friend. Sounds like the Honda guy who told his turbo Audi friend to sandblast the engine by hooking up a bag of fine grit sand to the intake & let the engine run.

Looking for a set of GT front caliper brackets for my brake upgrade.
Please PM me.
Thanks

I have one. JDM e154f w/driveshaft & part of the oil cooler setup. Axels I do not, and someone stole the speedo sensor out of it, but one from any e15x series should fit.

I'm in Cincinnati. Text me 513-667-zero.six.14