6G Celicas Forums

Is that for the 3S-GE UK engine?

*** INTEREST ONLY ***

If I can get a acceptable offers for ALL items then will consider selling.

One of a kind Super Charger Kit for Gen 6 (Not done before... That I know of)
Includes:
Drive shaft across manifold + bearings and belts
Bespoke Brackets
Oil Cooler
Charge Cooler
Carbon Firbre effect A-Piller pod for two gauges.
Oil Gauge
Boost Gauge
Fifth Injector
Piggyback Chip

RSM with G-Sensor

Origin B2 + Jammer

Leather Seats + Door Cards Two Tone Yellow/Black - swap with stock seats + additional cash

TRD Front Strut Brace - swap with stock + cash

GT4 Rear Strut Brace

Projector Lights

Quad Conversion Tail Lights

PM questions...

Simmo

I have these quads on my car and they look the dogs (IMHO).

As to installation... they are a straight swap.

As for the colour... they come in black and you need to have them resprayed to your chosen colour yourselves.

If you want to upgrade the bulbs to LED's then that means you will need a couple of resistors to slow the indicator lights down to half the speed on blinking.

I used Ace Parts for my LED's. Ask for Alan and he'll chuck in the resistor kit for free.

HTH

Simmo

Here's a picciy from a few years ago... light started fading so is a bit dark.



Simmo : D

The cars were arranged into a semi-arc and then several piccies were taken (about 22 in all). Then it was a case of stitchin' them together to recreate the arc.

Glad you guys like it.

Simmo

Footy in the celi... now that would be a giggle!

Gen 7's... well... we had to invite them!

GT4'sare more common these days but this was one of the smaller meets.

JAE in July should see a bigger turnout.

Simmo :lol:

A piccy from the meeting



Simmo :lol:

Hi All,

OK... the regular Scottish Members, of the Celica-Club, have convened and we have now set the date for the Scottish Borders meet.

Date
Saturday 21st August 2004

Time
Whenever you get there. I think Steve, Kevstir and whoever else we rope into our convoy will probably be there from about 10, although that may be subject to change.

Location
The view point on the Scottish/English border on the A68

Please check the following link for exact location.

How to find the meeting point

Whos Welcome
Everyone, members, lurkers, non-members, we don't care. Get yourself up to bonnie scotland for some nice fresh air and a chance to meet some of the more northern memebers. I've done a 1000 miles round trip for a meet so no excuses

Cheers,

Simmo :lol:

Is there any more to be had I wonder?

Simmo :lol:

Hi Guys,

Cheers for the comments.

The spoiler is a Wings West Supra Style with 26" LED Brake Light

I got mine for approx 350 GBP (sterling)

It was through a company called MSI

Hope this helps

Simmo :lol:

Hi all,

Cheers for the comments.

Couple of things to point out...

The tails are all clear as shown here...



The front indicators will become clear (when I can find an acceptable way to do it)

The spoiler is not that big... really! Oh... also it's a Wings West spoiler.

Hope this helps.

Cheers once again guys n' Gals.

Simmo

Just had this fitted... still needs a bit of work what with blending colours on the lights.





Comments?

Simmo :lol:

Hi Guys,

I removed the original dials, which are overlays themselves on the UK spec, doing this solved my problem of sticking needles. To remove I just snipped the original ones to the centre, took them off, used a pin with a head to replace the original needle rest.

Worked for me.

Hope this helps

Simmo

Have you removed the origianl dials or placed new one on top?

Remove originals and all will be fine. No more sticking.

Simmo

Eagle F1's 215/40/17

Simmo

Feckin' hell

I have never seen so many white gen6 celicas EVER. Your lucky if I see the odd one whilst drivin' BUT... OH... MY... GOD!!!!!

THAT meet looked.... I'm speechless!

Simmo

Hi all,

I am in the tail end of having a sc fitted to my 3s-gt engine. Just waiting on the tuning of it.

Currently running it in for 1000 miles. Running @ 230 BHP at the moment. Hoping to eek some more out of it after mapping.

Some things to think about if contemplating it are the stock internals will need to be changed/uprated if you want the car to last. You WILL be without the car for several months. The cost is not for the faint hearted and last but not least, GET IT DONE PROPERLY!!!!! There are so many people out there who might think they know what they are doing.... check them out BEFORE you start.

HTH

Simmo

Through experience...

0 to 60, the 6th gen (uk spec) is fatser than the gen 7 (uk spec)

60 to 100, the gen 7 makes up the ground what with the lift and all.

Both cars max out at about 145mph (Gen 6 was in front )

Simmo

Hi G_man,

GT everytime!

Power is all important. As soon as you get used to the SR/ST you'll crave more power.

Simmo

Here's some old picture of my interior. (No more wires showing )

Simmo

After several emails, I have found out a bit more info.

The covers were made by a company called Galbo, who are no more. Gang's Jail used to sell them but have sold out.

Had a reply from a company in South Africa who are investigating the possibility of making these.

Will let you know how it turns out.

Simmo

Anyone know where I can get these from?



Simmo

Sorry guys... gonna have to bomb on this. Just bought a Porsche 944 S2 Cabriolet. Somethin to play with. Now skint.

Next time round huh?

Simmo

Does anyone have a picture of the Celica hood available?

Also, the CF hood that we are trying to get, does this have a grade rating?

Simmo

After I had my sc fitted for the 3s-ge engine I gained about 60 bhp. Good luck with the install.

Simmo