6G Celicas Forums

Hey folks it s been a long long time since ive been on here. Lookin for some advice on a Timing belt change. Whats the interval on a timing belt change for the Beams 3SGE. I've last had it changed at 156,000KM, Iam now pushing a whopping 254,000KM (Still going strong), so iam near on a 100,000KM between changes....should I change it now? is the interval on the BEAMS BELT 100,000KM or 100,000 MILES???

Cheers Folks.

Hey There, just lookin for some info on tein s techs - basically I wanna know will I have any problems with rubbing if I install them on stock shocks wit the following wheel fitment - 215 45 17r et35, anybody got any experience with teins on this wheel/tire size??

Cheers

just tried figuring out how to get the bulb out the headlight again....that twist 45 degrees and pop it out only seems to work for the high beam, but for the big headlight nearest the fender this doesnt seem to work, its the big round globe bulb thats gone in the projector....all i can seem to do is remove the wiring from back of bulb but then iam stuck!! hoping its not a think i need to replace the whole unit???? any help guys please..need to get this sorted ASAP. thanks alot

k so I dont have to remove the light housing itself?? because ive unclipped the wiring from back of the bulb and there is like a block sort of rubber backing on the light with a hole only big enough for the 2 prongs on the back of the bulb to pertrude thru??? sorry guys ...bit confused!!! so basically does the bulb come out from the back of the light unit or pull out from the front of the light ie where the glass is (obviously once glass is removed) sorry people....

Hey lads and ladies, my projector low beam headlight bulb aint workin no more!!, anybody any idea how to remove the bulb? I had a fiddle about but cant see how the bulb comes out??? do i need to remove the whole light?? any help please....cheeeeeers!! also guys does anybody know how easy it is or how hard it is as the case may be to find a replacement bulb..dont imagine ill find one too handy???

got me baby back! purrin like a kitten

Thanks man, thats great, problem solved, they ordered the belt through main toyota dealer...fitted it today..ready for collection tomorrow. happy days. thanks again.

Thanks Edophus, you sure thats the part number for the BEAMS 3s-ge?? cos apparently the belts are different lenghts...its the one for BEAMS i need. and Rusty no, the pistons didn't hit, just gettin the job done for peace of mind. have the car 3 years now, jap import, not 100% sure when belt was done last, like a said..just for peace of mind

gettin a timing belt done , head is wrecked....mechanics doing the job say they cant find a timing belt for it..said it needs 174 teeth?? how can this be they cant locate a proper timing belt???? aaaaaaaaaaaarggggggggggggh

Hey, silly question, but when it comes to engine maintenance I am a bit of a novice but I intend on giving my 3S-GE beams a basic service, oil, filters fluid top up etc. Just wondering will an oil filter good for a standard 3S-GE work for the beams 3S-GE?? Like I said, probably a really silly question but there it is..... Cheers

excellent - ive been looking for that lip for ages now, Iam living in dublin Ireland...so you reckon theres no problem with them shipping to Ireland then?

cheers palz, thats a great help - ill get crackin!!!! nice job by all by the way - calipers look sweet!!!

hey, iam interested in painting my break calipers, just wondering if anybody has a close up shot of the painted caliper without the rims on!!, i just have the fear that i will end up painting sometthing iam not supposed to hee hee, nervous wreck when it comes to doing anything with my car meself..ye see i have nobody to blame if i do it myself and it goes wrong hee hee...any help? cheers paaaaaaaaaalz!

Cheers pal..ill checke it out (actually just saw a post all about this topic...doh!!!) sorry bout that!!! thanks anyway!!!

Just a quick question...I have a 98 st202 jap import!!! just wondering how can i tell what suspension setup I have? not too sure but from readin it seems that superstrut may have been an option on st202 models??? maybe iam wrong but if anybody can clear this up or tell me what i should look for to determine what set up i have it would be great....cheers!!!

Cheers pal...reaaaaaaaally want it badly..will start my search today!!

eh i have an st202 powered by 3SGE, But mine is BEAMs Tuned???? so does that make mine ss-II or ssIII.......so many variations - chasis code overload, can not compute!! mayday mayday!!! hee hee - sooooooooooooooo confused!!

hey...the front lip kit? what is it and where can i get one....i love it...car is amazing!!!! photos pure quality!!! lovin it!!

hey...can you tell me is the gauge surround you have installed on top pic....is it brushed alluminuim or is it the same silver as is on the centre console??? cheers...looks pretty sweeeeeeeeeet

nice one - good stuff boys and girls - off with the door panels it is so...cheers!!!

hey all, has anybody else found that when you play loud basey music that you can here a vibration/buzzin noise coming from both doors, i have the six speaker system.....it sounds like its actually both door handles that are buzzing....its crazy annoying and it can be heard iside and outside the car...anybody have the same problem and got any quick fixes??? thanks!!!!

Hey all, just started thinking about possibly installing some new gauges!, i was thinking maybe 2 gauges in the single din underneath headunit? has anybody done this...i was looking at some prosport gauges..i think they look amazing, the start up sequence and close down sequence look briliant! - can anybody tell me....is there alot to fitting the gauges, i mean electrically...iam a total door bell as far as electrics are concerned so can anybody advise...is there much to it?

any help thanks!!!

hey all, quick question....does anyonehave the part number for the eibach sportline springs? 1.5 drop all round! and also, as yis will see i have an 98 st202 on stock springs, anyone fitted the eibach te an st202?? i presume the suspension setup is the same on all models of that year? or am i mistaken? Cheers Pals

On Ebay search for TRD front corner spats, or rear as the case may be! some dude in england...not too expensive!

well mate i know ye can find trd replicas front and rear on ebay if thats any help!