6G Celicas Forums

Damn that blows! I can't wait to see the finished product it'll be amazing!! I like your determination

heres the link I was amazed! http://www.youtube.com/watch?v=eigGyG0vzcw

Do yout have windshield washer motor and plug along w all hoses if so how much shipped to 39560

bump still available

I dont what there called exactly. Make a reasonable offer and theyre yours. Im currently in Gulfport, MS

How much for the windshield washer bottle? Also the Radio Bezel the one w/ the A/c vents and also passengerside visor.

Oh and also The black visor that goes on the outside of the windows...Do you know what Im talkn about? Like the driver and passenger window seal its a black long strip on both doors

I was thinking about making a custom made one but idk I'd have to talk to my cousin he's a 15 yr exp welder Im pretty sure it would be cheaper. Didn't sum1 here make sum custom ones?

Hey nic how much for the windshield washer bottle? Shipped to Queen Creek,Az 85242 I jus want a quote on the bumper as well

Great job on the swap I want to try the same thing sumtime in the future I hope. Was it hard to swap it in? did u have alot of bugs to work out? Was there any additional steps that needed to be taken because this swap was a st215 engine not the st205 engine? FWD?

For those of you who have the ebay header on the st was it worth it? How much of a hassle because i see it only has a hole for one oxygen sensor

How much Hp and Tq you think the engine will make? Any goals?

How is the pull with the 650cc injectors? Does that turbo only hit like 15 psi max? Do you have a write up on some of this besides what you have as a part list in the begging? Have you tried pump gas with those new injectors? Sorry for all the questions I'm still learning lol

Will a 3sge tranny bolt up to the 3sgte Im guessing it will but not sure. I saw one on ebay Im not buying it but if sum1 is intrested its there heres the link http://cgi.ebay.com/ebaymotors/JDM-3SGE-ST...#ht_2397wt_1165

Can you swap over the black top beams in to the celica? I know people will say if you have $$ everything is possible. Im asking if its a ton of work because I think a 6spd black top rwd beams would be awesome. Theres one on youtube that said it has 600bhp idk not sure if its true but i know they can hold turbo pretty well. Theres one w/ a 66 garrett or sumin I believe sorry Idk much about turbos. I just wanted to know if its a direct swap from the Altezza to the celica or if theres a lot more custom fabrication taking place cause about 4k for the 6spd tranny engine and front and rear assembly it sounds like a deal to me. Ill keep researching to see how to manage this.

I did 2 layers on the roof n it fit fine didnt have any issues lol I did break my passenger visor oh well

So did anyone do the roof yet? I did my roof only and that did alot for me. Prolly try n do the rest sometime.

Ok so I've been looking for a cheap way to deaden sound cause as we all know it the celi is a sports car and not meant to have too much weight but I cant stand road noise. I live AZ past couple days its been 110 and above. "Sorry not tryn to bore u" Anyways my roof gets so hot even with a/c on full blast it takes like 20mins to cool down maybe 5 degrees. My a/c works fine. I decided to do some research on some sound deadener cause I have a sub as well. I found out that stuff also helps to stop heat which made since to me if the panel is thicker it will take a while to heat up. I had read that this air duct insulation wrap does the same deal. So I researched it its called "Frost king" thats the brand anyway. Both Lowes and Home depot sell it. I went to Lowes cause it cheaper. You can get 12" and 15ft of it for like 15. I took off my headliner yesterday day and broke my visor in the process t was sun baked oh well. I scraped off the old padding in there. Afterwards I got and old clean rag and soap and water and scrubbed off any sticky residue and dirt did it 3 times to be safe. Then I dried it with another old clean rag. Then started applying it since it has a sticky side u dont need glue. It stuck on there real well i had enough to do it twice. All I can say is that it feels cooler inside and my bass sounds cleaner. You can try it yourself its not too tough. I only did the roof cause thats all the money I had but i thiunk Im going to do my whole car. The material is pretty light weight.

I dnt understand the question but if you look in pic right by the driver side low beam youll see the cap its like a gray color

I dnt understand the question but if you look in pic right by the driver side low beam youll see the cap its like a gray color

NVM I FOUND IT!!!! Its right there where the guy said behind the bumper in front of radiator its a small line that goes up =)

Im having the same problem i followed the line and cant find the high pressure all i can find is the low pressure can anyone help that has info on this please and thank you =)

GRT build I have a question about your paint job though Did you use adhesion promoter on the plastics like the front bumper cause im pretty sure it would have prevented the chips in your paint job not mad dogging you just asking Can anyone back this up

Hi im interested in the driver side low beam and the passenger side engine mount How much? What condition? Can you ship to 85242? Thank you

ah s8*t really ok well who has em and how much?? Also on the 5th gen calipers how come the 6th gen st brake lines fit but dont seal do i need to get new or custom made brake lines too? Well we customed some things to make the 6 gen rotors fit and now we might have to get custom brake lines wow this is a huge swap for me lol I didnt think this would be this hard you guys all made it sound really easy made because i have 5th gen back plate, calipers and e-brake cables I'll c if the 5th gen brake cables work I hop[e they do.

BTW im using the 5th gen e brake cable dnt know if that matters i understood it doesn't im not sure though

Dang i cant put the rotors on they wont clear the e brake shoes. Can anyone help??=*( I push the e- brake cable all the way back put it doesnt make them small the adjustment is all the way down. Im puttn in new rotors and e-brake shoes if anyone can help with my problem i'd greatly appreciate it