6G Celicas Forums

Welcome Guest ( Log In | Register )


Dec 2, 2008 - 1:33 AM Forum: Buying/Selling · Post Preview: #735015 · Replies: 227 · Views: 37,508
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


QUOTE (GotToyota @ Oct 18, 2008 - 11:45 PM) *
My friend Kyle (97celiman) and I are collaborating to part out this 94’ ST. It is a red body with black interior. The car came without a few things including the block (we have just the head), transmission, among some small things. The car was repainted by a previous owner, the job itself wasn’t bad, but I believe the car could use the buffing. The interior itself is nearly perfect, and we have almost every piece you could want. The chassis has 206XXX miles on it, but everything underneath looks like it’s in great shape.
hey whats up,
you wouldnt happen to have the driver seat would u with the bracket?

Here are pics of the car itself:

http://i5.photobucket.com/albums/y181/GotT...%20car/car1.jpg

http://i5.photobucket.com/albums/y181/GotT...%20car/car2.jpg

http://i5.photobucket.com/albums/y181/GotT...%20car/car3.jpg

http://i5.photobucket.com/albums/y181/GotT...%20car/car4.jpg

Now on to the parts.

Interior

Automatic shifter bezel (bottom right) - $25 shipped
http://i5.photobucket.com/albums/y181/GotT.../dashpieces.jpg

Gauge trim piece (bottom left) - $15 shipped
http://i5.photobucket.com/albums/y181/GotT.../dashpieces.jpg

Lower dash steering trim (including crotch vent, top left) - $30 shipped
http://i5.photobucket.com/albums/y181/GotT.../dashpieces.jpg

Dead pedal (bottom right) - $15 shipped
http://i5.photobucket.com/albums/y181/GotT...nteriormisc.jpg

Passenger side back seat panel - $50 shipped
http://i5.photobucket.com/albums/y181/GotT...elpassenger.jpg

Drivers side back seat panel - $50 shipped
http://i5.photobucket.com/albums/y181/GotT...paneldriver.jpg

Gauge cluster - $45 shipped
http://i5.photobucket.com/albums/y181/GotT...car/cluster.jpg

Courtesy cover - $30
http://i5.photobucket.com/albums/y181/GotT...urtesycover.jpg

Airbag sensor - $30 shipped
http://i5.photobucket.com/albums/y181/GotT...nteriormisc.jpg

Airbag - $35 shipped
http://i5.photobucket.com/albums/y181/GotT...car/airbag1.jpg

Steering wheel - $35 shipped
http://i5.photobucket.com/albums/y181/GotT...%20car/car2.jpg

Passenger side front seat belt - $25 shipped
http://i5.photobucket.com/albums/y181/GotT...r/seatbelts.jpg

Passenger side rear seat belt/insert - $25 shipped
http://i5.photobucket.com/albums/y181/GotT...nteriormisc.jpg

Drivers side rear seat belt/insert - $25 shipped
http://i5.photobucket.com/albums/y181/GotT...nteriormisc.jpg

Cruise control computer - $20 shipped
http://i5.photobucket.com/albums/y181/GotT...isecomputer.jpg

Drivers/passenger side hatch trim - $10/each
http://i5.photobucket.com/albums/y181/GotT...r/hatchtrim.jpg

Strut mount cover (right side) - $10/each shipped
http://i5.photobucket.com/albums/y181/GotT...0car/covers.jpg

Fuse cover - $10 shipped
http://i5.photobucket.com/albums/y181/GotT...r/fusecover.jpg

Drivers/passenger side A pillar - $15/each
http://i5.photobucket.com/albums/y181/GotT...ar/apillars.jpg

Passenger side window switch - $20 shipped
http://i5.photobucket.com/albums/y181/GotT...indowswitch.jpg

Center console (w/o lid) - $40
http://i5.photobucket.com/albums/y181/GotT...nterconsole.jpg

Ignition trim - $30 shipped
http://i5.photobucket.com/albums/y181/GotT...gnitiontrim.jpg

Center console lid (recovered in cloth, includes cup holder) - $15

Top/bottom steering wheel trim - $15/each shipped
http://i5.photobucket.com/albums/y181/GotT...nterconsole.jpg

Drivers side vent - $25 shipped
http://i5.photobucket.com/albums/y181/GotT...driversvent.jpg

Non-tweeter mirror covers (pair) - $20 shipped
http://i5.photobucket.com/albums/y181/GotT...0car/covers.jpg

Passenger side kick panel - $20 shipped
http://i5.photobucket.com/albums/y181/GotT...elpassenger.jpg

Drivers side kick panel - $20 shipped
http://i5.photobucket.com/albums/y181/GotT...paneldriver.jpg

Drivers/passenger side door handle trim - $15/each shipped
http://i5.photobucket.com/albums/y181/GotT.../handlejams.jpg

Moonroof/map light control - $20 shipped
http://i5.photobucket.com/albums/y181/GotT...nterconsole.jpg

Factory radio w/brackets - $40 shipped
http://i5.photobucket.com/albums/y181/GotT...0car/radio1.jpg

http://i5.photobucket.com/albums/y181/GotT...0car/radio2.jpg

A/C climate control - $45 shipped
http://i5.photobucket.com/albums/y181/GotT...atecontrol1.jpg

http://i5.photobucket.com/albums/y181/GotT...atecontrol2.jpg

Drivers/passenger side rear speaker pod w/speaker - $35/each shipped
http://i5.photobucket.com/albums/y181/GotT...r/rearspkrs.jpg

Glove box - $40
http://i5.photobucket.com/albums/y181/GotT...ar/glovebox.jpg

Hatch courtesy light - $15 shipped
http://i5.photobucket.com/albums/y181/GotT...r/rearlight.jpg

Black floor carpet - $50
http://i5.photobucket.com/albums/y181/GotT...0car/carpet.jpg

Automatic shifter assembly - $30
http://i5.photobucket.com/albums/y181/GotT...car/shifter.jpg

Dash - $65 (local pickup preferred)
http://i5.photobucket.com/albums/y181/GotT...%20car/car2.jpg

Lower dash (radio and shifter surround) - $30 shipped
http://i5.photobucket.com/albums/y181/GotT...r/lowerdash.jpg

5SFE ECU - $40 shipped

http://i5.photobucket.com/albums/y181/GotT...%20car/ecu1.jpg

http://i5.photobucket.com/albums/y181/GotT...%20car/ecu2.jpg

Top hatch trim - $10

Body

We prefer most of this to be local pickup, unless you’re willing to pay for shipping cost.

Hood (has some rust in the top right corner) - $30 (local pickup only)
http://i5.photobucket.com/albums/y181/GotT...%20car/car4.jpg

Rear bumper - $35 + shipping
http://i5.photobucket.com/albums/y181/GotT...%20car/car3.jpg

Passenger side door shell (w/o glass) - $150 shipped
http://s420.photobucket.com/albums/pp286/M...current=017.jpg

http://s420.photobucket.com/albums/pp286/M...current=018.jpg

Hatch (w/glass) - $50 (local pickup only)
http://i5.photobucket.com/albums/y181/GotT...%20car/car3.jpg

2 post spoiler - $100 shipped
http://i5.photobucket.com/albums/y181/GotT...ar/spoiler1.jpg

http://i5.photobucket.com/albums/y181/GotT...ar/spoiler2.jpg

Drivers side high beam (some overspray and slight scratch on face, comes with bulb) - $30 shipped
http://i5.photobucket.com/albums/y181/GotT...orhighbeam1.jpg

http://i5.photobucket.com/albums/y181/GotT...orhighbeam2.jpg

Drivers side mirror (will need to be repainted) - $30 shipped
http://i5.photobucket.com/albums/y181/GotT...orhighbeam1.jpg

http://i5.photobucket.com/albums/y181/GotT...orhighbeam2.jpg

Passenger side mirror (no glass) - $20 shipped

License plate bezel - $30 + shipping
http://i5.photobucket.com/albums/y181/GotT...%20car/car3.jpg

Side markers - $15 shipped

Engine/mechanical

Distributor w/cap - $60 shipped
http://i5.photobucket.com/albums/y181/GotT...istributor1.jpg

http://i5.photobucket.com/albums/y181/GotT...istributor2.jpg

Auto parts store alternator - $40 shipped
http://i5.photobucket.com/albums/y181/GotT.../alternator.jpg

Throttle body (w/TPS sensor) - $35 shipped
http://i5.photobucket.com/albums/y181/GotT...s%20car/tb1.jpg

http://i5.photobucket.com/albums/y181/GotT...s%20car/tb2.jpg

http://i5.photobucket.com/albums/y181/GotT...s%20car/tb3.jpg

Intake manifold - $40 + shipping
http://i5.photobucket.com/albums/y181/GotT...car/intake1.jpg

http://i5.photobucket.com/albums/y181/GotT...car/intake2.jpg

Fuel rail/injectors - $30
http://i5.photobucket.com/albums/y181/GotT...car/intake1.jpg

Starter - $60 shipped
http://i5.photobucket.com/albums/y181/GotT...ar/starter1.jpg

http://i5.photobucket.com/albums/y181/GotT...ar/starter2.jpg

Thermostat housing - $20 shipped
http://i5.photobucket.com/albums/y181/GotT.../thermostat.jpg

7A-FE head (comes with cams, gears, and lifters [what we got], no info on mileage) - $80 (prefer local pickup)
http://i5.photobucket.com/albums/y181/GotT...20car/head1.jpg

http://i5.photobucket.com/albums/y181/GotT...20car/head2.jpg

http://i5.photobucket.com/albums/y181/GotT...20car/head3.jpg

Valve cover w/oil cap - $30
http://i5.photobucket.com/albums/y181/GotT...valvecover2.jpg

http://i5.photobucket.com/albums/y181/GotT...valvecover1.jpg

Exhaust manifold w/cat and o2 sensor - $30
http://i5.photobucket.com/albums/y181/GotT...ar/exhaust1.jpg

http://i5.photobucket.com/albums/y181/GotT...ar/exhaust2.jpg

Radiator fans - $35/each shipped
http://i5.photobucket.com/albums/y181/GotT...%20car/fan1.jpg

http://i5.photobucket.com/albums/y181/GotT...%20car/fan2.jpg

A/C compressor - $40

7A-FE map sensor - $15

Engine bay fuse box cover - $15

Charcoal canister - $10

We have many other parts on the car that we haven’t taken off yet. If there is something you need don’t hesitate to ask us. PM me if you have any questions.

-Matt


Mar 15, 2008 - 12:04 AM Forum: Exterior Styling · Post Preview: #654096 · Replies: 10 · Views: 2,394
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


do you know where i can get oem rear extensions.

QUOTE(Celicav @ Mar 8, 2008 - 3:31 PM) [snapback]650748[/snapback]

Need some clarification please. Are there really two different OEM Front Extension/splitters (the ones that flare out and go well with the 404 sideskirts) for the pre-facelift (94-95) vs facelifted (96-99) bumpers? Were there any slight adjustments made, or do they just fit both bumpers? I am set to buy a set from kcizzle, but we have different bumpers. I did a search, but could not find a definitive answer.

Thanks!

Talking about these: any adjustments made for the two different bumpers, or was only one version made?

Extension example


Mar 13, 2008 - 11:51 PM Forum: Buying/Selling · Post Preview: #653644 · Replies: 14 · Views: 4,511
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


hey i am i am really interested! please get back at me
QUOTE(prewalker @ Mar 6, 2008 - 5:06 AM) [snapback]649765[/snapback]

I was going to turbo my 5sfe celica but decided not to since i got deployed to the desert. I have everything you need expect the oil/water lines and the oil pan everything else i have. I'll sell everything for $1250.00 oBO either email me at prewalker@hotmail.com or PM me here or reply back for any questions thanks

CT 26 Turbo
3stge MAP 2 sensor
3stge Manifold
Toyota Supra Celica GTS MR2 OIL FILTER SANDWICH PLATE
Ultra 8 mm hipro spark plug wire set Toyota 5sfe celica
28x7x2.5 FMIC TURBO INTERCOOLER
TOYOTA SUPRA CT26 7M-GTE Turbocharger outlet Gasket
BOOST GAUGE 82 86 93 SUPRA MK2 MK3 MK4 TURBO CELICA
MR2 T3/T4 TURBO ADAPTER FLANGE - CT25 TO T3/T4
Fuel Pressure Regulator Blue Universal
6 SUPRA TURBO 440cc FUEL INJECTORS
TOYOTA CT26 Turbo Turbocharger Complete Gasket Set
Turbo BOV Blow off Valve + Adapter pipe 2.5" B
Toyota MR2 91 92 93 94 95 Turbo 3SGTE Walbro Fuel Pump


Mar 13, 2008 - 10:30 PM Forum: Buying/Selling · Post Preview: #653602 · Replies: 50 · Views: 7,475
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


i havnt really looked at prices for the projectors but what im asking is how much are you looking to get out of them cuz i am really interested!

QUOTE(dustin15brown @ Jan 2, 2008 - 1:31 PM) [snapback]627451[/snapback]

Ok everyone, it's time for me to sell these DCW projectors. Here's the info on them:
Modded from OEM headlights
Retrofitted 3 series BMW projector
HELLA HIDs 4300k from an Audi S8
Had polished clear glass lenses but my father cracked one, so there will be one clear glass lense and then 2 clear plastic lenses.
Front shroud is color matched to the front of the JDMs
Angel eyes and wiring already on, also there is a parking light hooked up
Carbon Fiber eyelids from DCW
One mounting tab was broken a few years ago but is fine now.
The highs are regular JDM highs with the clear lense. I have the chrome front reflective piece and then, as you can see in the pics, the color matched front piece to the lows. Both will be included. All tabs are fine
IPB Image
IPB Image
IPB Image
IPB Image
IPB Image
IPB Image

Best Offer.... I have no price guesses because they are truly one of a kind and were the original pair of custom projectors by DCW. These lights are amazing


Mar 13, 2008 - 10:11 PM Forum: Buying/Selling · Post Preview: #653591 · Replies: 50 · Views: 8,943
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


do you have any door panels?
QUOTE(Asdbearc @ Mar 3, 2008 - 12:15 PM) [snapback]648650[/snapback]

I am parting out my 94 GT silver. if any of u guys need anything let me know.


Mar 12, 2008 - 8:47 PM Forum: Buying/Selling · Post Preview: #652902 · Replies: 10 · Views: 4,789
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


how does a $110.00 sound. ive been looking for a while for rear extensions.

QUOTE(Culpable04 @ Jan 16, 2008 - 3:10 PM) [snapback]631351[/snapback]

I have a set of OEM rear extentions for sale, they are made out of fiber glass, I got them from chrisc some time ago, they are just as they came, with the gel coat.

let me have your offers ( not an auction ) I'm not looking for the highest bidder, the first member with a reasonable offer will take them. PM me with your offers and if it's reasonable they'll go to you.


IPB Image
IPB Image
IPB Image


Mar 12, 2008 - 8:37 PM Forum: Buying/Selling · Post Preview: #652897 · Replies: 16 · Views: 5,174
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


how much do you want for both door panels?

QUOTE(Digndoug @ Jan 17, 2008 - 9:14 AM) [snapback]631533[/snapback]

I AM CLEANING OUT MY GARAGE A FEW THINGS I NEED TO SELL

LEATHER 3 WAY SPEAKER DOOR PANELS.. GREAT FOR ANY ONE THAT WANTS TO ADD A GREAT STERO AND KEEP A CLEAN FACTORY LOOK, ALSO VERY RARE

http://img.photobucket.com/albums/v249/digndoug/DSC_0106.jpg
http://img.photobucket.com/albums/v249/dig.../DSC_0105-1.jpg

LEFT AN RIGHT HATCH BACK TAILS..
http://img.photobucket.com/albums/v249/digndoug/DSC_0068.jpg

LEATHER CNTR CONSOLE
http://img.photobucket.com/albums/v249/digndoug/DSC_0025.jpg

5X114 17" WHEELS FROM MY BMW I BOUGHT THEM BRAND NEW, HAS NITTO TIRES, WERE USED MAYBE 3K MILES

http://img.photobucket.com/albums/v249/digndoug/DSC03389.jpg
http://img.photobucket.com/albums/v249/digndoug/DSC03420.jpg
http://img.photobucket.com/albums/v249/digndoug/DSC04023.jpg
http://img.photobucket.com/albums/v249/digndoug/DSC04022.jpg
http://img.photobucket.com/albums/v249/digndoug/DSC03421.jpg

SILVER HATCH WING
http://img.photobucket.com/albums/v249/digndoug/DSC_0056.jpg
http://img.photobucket.com/albums/v249/digndoug/DSC_0017.jpg

CEILING PANEL
http://img.photobucket.com/albums/v249/digndoug/DSC_0044.jpg

REAR CENTER PANLE (COULD MAKE A BLANK OUT PANEL IF INTERESTED) WILL COST MORE..
http://img.photobucket.com/albums/v249/digndoug/DSC_0016.jpg
THESE ARE WHAT THE BLANK OUT PANEL LOOKS LIKE (IT WOULD BE FIBERGLASS, AND PRIMED TO PAINT
http://img.photobucket.com/albums/v249/digndoug/DSC00285.jpg
http://img.photobucket.com/albums/v249/dig.../P1010780-2.jpg
http://img.photobucket.com/albums/v249/digndoug/183_3.jpg

STOCK WHEELS (THEY ARE PAINTED, KINDA BEAT UP AND WELL THE TREAD IS 50/50 PICK UP ONLY)
http://img.photobucket.com/albums/v249/dig.../DSC_0145ch.jpg
http://img.photobucket.com/albums/v249/dig.../DSC_0140ch.jpg
http://img.photobucket.com/albums/v249/dig.../DSC_0138ch.jpg
http://img.photobucket.com/albums/v249/digndoug/DSC_0174.jpg

2 12" ROCKFORD HE'2 SUBS, THEY ARE 4 YEARS OLD, HAVE BEEN SITTING IN MY ATTIC NOT BEING USED OFF AN ON FOR 4 YEARS.. 400 RMS 800 MAX.. SOUND GREAT.. PICK UP ONLY

http://img.photobucket.com/albums/v249/digndoug/DSC06803.jpg


PLEASE PM ME, OR EMAIL ME AT DOUGKUCHTA@GMAIL.COM i WILL RESPOND TO EMAILS MUCH FASTER


Mar 12, 2008 - 8:30 PM Forum: Buying/Selling · Post Preview: #652892 · Replies: 33 · Views: 8,089
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


hey whats up, how much for the gauges?

Mar 12, 2008 - 8:17 PM Forum: Buying/Selling · Post Preview: #652886 · Replies: 50 · Views: 8,943
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


hey whats up, you wouldnt happen to have a driver side door panel and driver side tweeter cover would u? if so how much would they be?

QUOTE(Asdbearc @ Mar 3, 2008 - 12:15 PM) [snapback]648650[/snapback]

I am parting out my 94 GT silver. if any of u guys need anything let me know.


Mar 12, 2008 - 8:15 PM Forum: Buying/Selling · Post Preview: #652884 · Replies: 7 · Views: 2,710
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


i know this is a lil off subject but could u fit 3sgte parts on a 3sge. like does everything bolt up right?

QUOTE(celicast3sgte @ Mar 10, 2008 - 1:38 PM) [snapback]651464[/snapback]

I got a brand spankin new wolfkatz rail and 880cc PT injectors new in box. I was going to build my 2nd gen 3sgte but Im just going to run stock rail and 550s and put the cash towards my new truck. I can get pics if anyone is interested!

rail- $295 shipped

injectors w/ clips- $310 shipped

both- $535 shipped


Mar 12, 2008 - 8:05 PM Forum: Buying/Selling · Post Preview: #652878 · Replies: 23 · Views: 7,436
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


how much would u sell me just the rear extensions for?

QUOTE(chrisc @ Dec 13, 2007 - 9:53 PM) [snapback]622614[/snapback]

Brand new SS-III Front and Rear splitters for sale. Primered and ready to paint. Looking for $310 shipped. It takes around 1 week for the shipping. Accept PayPal as the payment method. Please PM me if interested.

IPB Image


Mar 11, 2008 - 7:46 PM Forum: Buying/Selling · Post Preview: #652249 · Replies: 1 · Views: 1,323
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


i need driver side panel and tweeter cover

QUOTE(94CELICAGT_98584 @ Feb 20, 2008 - 8:30 PM) [snapback]643830[/snapback]

I need two door panels with the extra speaker spot. I also need the middle arm rest and the plastics that go around where the steering wheel pivots. I also need a glove box. Thanks I will post pics later tonight or tomorrow


Mar 11, 2008 - 7:42 PM Forum: Buying/Selling · Post Preview: #652247 · Replies: 20 · Views: 3,537
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


does he have any door panels n driver side tweeter cover


QUOTE(Havok1997GT @ Mar 10, 2008 - 7:43 PM) [snapback]651666[/snapback]

To all Houston Celicas. I have a guy that is parting out a 95 GT Coup for VERY low prices. to give you an Example: The first 2 are already sold but just showing you what the price was

All parts and then some for a full Rear Disc convertion on a ST: $60

2 High beam and 1 low beam: $150

Map Senser: $20. (FYI, Those things go for $300 new)

Front Seat: $75

This guy is getting tired of holding on to this car and wants this stuff to go. Me and Panda are the only ones that have touched this car, so if you need it you got about a 95% chance of getting it. PM me and we can work something out in getting it. I dont mind doing all the pick and pull and bring it to yah, but im going to need some help with gas cuz its on the other side of Houston for me (North Side)........and maybe you can get my dinner next Houston meet biggrin.gif , anyways, or if you want to just go and get it yourselves PM me and ill give you the number to call the guy and hell tell you how to get there, let you use his tools in his shop to get the parts you need, and still give you a great deal.

This is for Houston only. Neither me nor the guy thats selling the parts wants to have to deal with shipping.

Let me know what you guys need.


Mar 11, 2008 - 7:36 PM Forum: Buying/Selling · Post Preview: #652243 · Replies: 74 · Views: 25,315
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


do you have any door panels?

QUOTE(DeW_H0e_GT @ Feb 10, 2008 - 2:23 AM) [snapback]639943[/snapback]

Hey guys/gals,

as some of you remembered, i wrecked the celica and have some parts left....heres part 2 of my selling frenzy..... wink.gif

1. *NEW* OEM Sensor - $50 Shipped ~SOLD
2. *NEW* Purolator Fuel Filter - $40 Shipped
IPB Image
IPB Image
3. OEM Dead Pedal - $15 Shipped ~SOLD
4. Relay Cover (Painted Blue) - $15 Shipped
IPB Image
5. Fuse Cover (Engine Bay) - $20 Shipped
IPB Image
IPB Image
6. *NEW* OEM Clear Courtesy Lense (One) - Free + Shipping ~SOLD
7. *NEW* OEM Toyota Black Self-Tapping Screws w/Washer (Five) - $4 Shipped
IPB Image
8. *NEW* OEM Toyota Clips (I bought these for my OEM side skirts but never used them) - $7 shipped ~SOLD
9. *NEW* Mini Fuse Taps (2 Packs - For your accessories, gauges, etc etc) - $5 shipped
IPB Image
IPB Image
10. Carbon Fiber Interior Pieces (Professionally Wrapped in HK) - $20/Piece shipped
- Vents, Door Caps (Sold As EACH)
IPB Image
11. *USED but in Good Condition* RCR 3-pt Rear Strut Bar for Hatchbacks - $90 Shipped ~SOLD
12. Clear Low Beams Lense (Pair) - $45 shipped ~SOLD
13. APC Water Temperature Gauge - $20 Shipped
IPB Image
14. OEM Toyota Red Courtesy Lense (Pair) - $10 Shipped
IPB Image
15. OEM Toyota Ignition Switch (Came off a 6th Gen GT Automatic) - $10 Shipped
IPB Image
16. 3000K HID Bulbs (Require Ballasts to work)- $40 Shipped
IPB Image
http://i21.photobucket.com/albums/b269/DeW...04/DSC01671.jpg
17. Climate Control Modded Blue (About 90% Done, for more info please pm wannabegt4 - Have all teh knobs, screws and parts to make it the whole assy complete not shown in pic) - $30 shipped ~SOLD
18. OEM Toyota High Beam Lense - $30 shipped
IPB Image
http://i21.photobucket.com/albums/b269/DeW...04/DSC01675.jpg
19. Third Brake Light Cover wrapped by me (amateur) with carbon fiber (from Hatch) - $15 Shipped
IPB Image
20. *NEW* Thermostat w/Gasket - $10 Shipped
IPB Image
http://i21.photobucket.com/albums/b269/DeW...04/DSC01680.jpg
21. *NEW* OBX Silicone BLUE Radiator Hoses (These are NOT GT4 Hoses) - $50 Shipped ~SOLD
22. DCW Duckbill Wing (Never Installed - Painted Black) - $140 Shipped ~SOLD

Please add an additional 3% on top of the shipped prices shown above for paypal fees....i will not give you credit if you dont.....please understand.....

I'll have more pics/parts info soon.....additional pics can be requested.....help me get rid of these goodies
Also, check out my other for sale thread on PAGE 1.....Some stuff i've posted on the link below shows up here too....

http://www.6gc.net/forums/index.php?showtopic=37822

Have a good day/evening......


Mar 11, 2008 - 7:29 PM Forum: Engine/Transmission/Maintenance · Post Preview: #652237 · Replies: 10 · Views: 2,782
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


will 3sgte parts fit on a 3sge like intake manifold n turbo ect...

QUOTE(Rusty @ Mar 10, 2008 - 1:29 AM) [snapback]651257[/snapback]

So here are my stock cam profiles (I think)
QUOTE
In: 252deg, 9.8mm lift (timing 7/65)
Ex: 240deg, 8.2mm lift (timing 53/7)


I've got 150HP @ wheels
178HP @ flywheel

looking for some good gains (which is around 20HP??) so medium- Heavy Street cams.
So aswell as those I'll have to get 'adjustable cam gears' and 'Rockers/followers' anything else? springs?

So I'm having a hard time looking for parts, its always for 3S-GTE (which is different, since no dizzy) or for the US Celica (ST or GT) or Beams 3S-GE.


Mar 9, 2008 - 6:21 PM Forum: Buying/Selling · Post Preview: #651093 · Replies: 23 · Views: 12,080
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


hey beautiful celica, where r u located?


QUOTE(supradog1 @ Mar 8, 2008 - 4:58 PM) [snapback]650777[/snapback]

hi people some of you may remember this car and the huge write up i did on it about a year back... well now the celica is up for sale... i hate to let her go but i must for bussness reasons.. she has 200K miles but almost every mechanical part on the car has benn replaced!!! it would be a perfect project for someone wanting to install a 3sgte!!! i WILL NOT part this car out!!! do not eaven ask!!! if u want to buy this car give me a call @ 786 356 3560 day or nite...shipping can be arranged at request, as we own a auto transport service...

TRD GT4 conv in Florida

pics as of today 3/8/08
IPB Image

IPB Image

IPB Image

last mo. pics
IPB Image

IPB Image

IPB Image


Mar 9, 2008 - 10:25 AM Forum: Buying/Selling · Post Preview: #650968 · Replies: 7 · Views: 3,876
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


hey whats up, would u sell me just the rear extensions. and how much would they be?

QUOTE(kcizzle @ Mar 8, 2008 - 8:45 AM) [snapback]650656[/snapback]

Sup everyone! I am selling my rear and front splitters which i bought from dustin brown and doggy a year ago. The front passenger side got a small chip when I accidentally drove through a pile of hard snow, because the celi's too low. These are replicas by the way, and if you know how to fiber glass I think this is an easy fix. It is painted Toyota Red 3L2. I am looking for at least $200 shipped U.S. only. This would be a good summer project. I only accept PayPal. PM me for info.

Pics:

Here's the chip:
IPB Image

Rear
IPB Image

Front
IPB Image

IPB Image

IPB Image

IPB Image


Feb 14, 2008 - 11:36 PM Forum: Meet/Event Discussion · Post Preview: #641682 · Replies: 548 · Views: 15,663
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


Is there any members in the wyoming region of usa or near

Jan 28, 2008 - 7:53 PM Forum: Exterior Styling · Post Preview: #635486 · Replies: 5 · Views: 1,949
c-one_celica

Enthusiast

Joined Jan 10, '08
From wisconsin
Currently Offline


QUOTE(JOEY3S @ Jan 8, 2008 - 1:50 PM) [snapback]629248[/snapback]

hello my brothers and sister of 6gc, i wanted to know if there will be a problem with my cf hood is a invader from vis and i have a 3sgte swap as you can see from my car photos my oem hood had to be raise do, to the top mount intercooler for it can be closed right, now i haven't put on my new cf hood cuz i have not painted the car and i don't want to take the glammer out and i am saving it for when i paint her. the problem is that do you guy's think that when the intercooler piping is done will it bather on the hood and if i raise it like my hood now can it be ok.

hey sup, i have the cf invader hood n the only problem i c is maybe the clearance of ur top mount but i think u should be fine. thats if the end of the top mount fits in the scoop area. well i hope i helped u later

QUOTE(JOEY3S @ Jan 8, 2008 - 1:50 PM) [snapback]629248[/snapback]

hello my brothers and sister of 6gc, i wanted to know if there will be a problem with my cf hood is a invader from vis and i have a 3sgte swap as you can see from my car photos my oem hood had to be raise do, to the top mount intercooler for it can be closed right, now i haven't put on my new cf hood cuz i have not painted the car and i don't want to take the glammer out and i am saving it for when i paint her. the problem is that do you guy's think that when the intercooler piping is done will it bather on the hood and if i raise it like my hood now can it be ok.

hey sup, i have the cf invader hood n the only problem i c is maybe the clearance of ur top mount but i think u should be fine. thats if the end of the top mount fits in the scoop area. well i hope i helped u later


New Posts  New Replies
No New Posts  No New Replies
Hot topic  Hot Topic (New)
No new  Hot Topic (No New)
Poll  Poll (New)
No new votes  Poll (No New)
Closed  Locked Topic
Moved  Moved Topic
 

Lo-Fi Version Time is now: January 9th, 2025 - 4:25 PM