6G Celicas Forums

Looking to buy;

Tweeter Covers (L/R)
Passenger Side Door Panel (Good/Great Condition)
Right Side A/C Vent
Top Dashboard Vents (L/R)
Clear Plastic over Speedometer
Armrest w/Hinge (Good/Great Condition)
Rearview Mirror (Good/Great Condition)

E-mail me or reply with price+shipping, thanks.

whats the condition of the passenger door panel?

Has anyone attempted to remove the passenger side wiper, and reposition the driver wiper to cover the whole window yet??? Be nice to know if someone tried before I go through all the trouble and realise it cant be done =).

Not yet, right now they are sitting in a typical square enclosure, each using 1.25 cubic feet, i am in the middle of fiberglassing my whole interior, once i finish the door panels, i will start on the trunk... i will however start a progress thread once i get the chance...

Don't get audiobahn, they are crap...

Choose a sub like jl audio w6's, alpine type r's, or kicker l5 or l7's... if you just want a single sub.

And as far as your back window breaking, your friend has no idea what he is talking about, I have four JL Audio 10w6v2's with a jl audio 1000/1 pushing them, my hatch window is fine.

Ok where can I find door mouldings for our cars? i tried autopartspeople.com and 1sttotoyotaparts.com but they dont have illustrations of the parts any more so I do not know if i'm ordering the right thing...

any suggestions please.

Where can I get the clips to hold down the rubber gasket around headlights? It seems I'm missing some.

Ya I pulled out my door panel nothing happens except when i try to roll it up it clicks the motor but of course the window's up so nothing has to happen...

Well the problem is u know when u roll up and down ur window the lights dim usually...
Well the lights dim when i try and roll it up, and i hear the clicking of the motor, but when
i roll it up i hear nothing and no lights dim...

think it might be the switch?

My body mechanic just took a 1/2 thich by 2 1/2 to 3inch high peice of steel and welded it to the ends where the bolts went on the crash bar.

Looks good ...

Question, how much room do you have from the inside of the rim to the strut in the rear?

only reason im asking im looking to get 19x8.5 in front and 19x9.5 in rear...

NEW UPDATE;

Well it's still in the shop 5 months now... had a few engineering problems, mainly how to support and stiffen the front bumper and also allowing room for the intercooler. We finally discussed it and figured it out we laid a 1/2 inch thick x 1 1/2" metal bar across the length of the old crash bar points and welded it, giving enough room for the intercooler and an area where he can weld brackets to support the front bumper from flexing while on the road.

All thats left now is paint. Door jams, trunk area have been painted (less the pearl). So hopefully this week ill have some pics.

E looks like a microphone hold for a microphone stand... I dont believe its celica related.

its probably flaired about 3/4" give or take, but what offset i dont want it to hit the strut.

Ok since my car is sitting in the bodyshop and the fenders are flared to make the side skirts and rear look as if it belongs, Im thinking of putting 18's or 19's on my car staggered fit. I need to know what what would be the widest I can go.

C-one style front bumper, Invader Side Skirts, Type Z Rear Lip.

Went to the bodyshop today side skirts are molded in and fenders rolled and flaired. All minor nicks and small dents removed, now he's onto the bumpers...

Has anyone bought from autopartspeople.com???

Lol you guys are harsh on people. Simply get a piece of cardboard lay it behind the hole, than get JB Weld and fill in the area making sure the cardboard below doesnt fall... smooth it out wait till it dries and sand it down... hole filled wont crack.

If you mean my engine light, no it's not... i check the vacuum hoses quickly but didnt notice any broken ones... I also changed out my pcv valve.

Hey guys, I'm having a problem, I am experiencing surging when I drive, it seems like it's bogging, than it will try to pick up than bog down than after about 3 or 4 surges it's fine till next gear... I've changed my air filter, oil filter, distributor cap, and ignition coil today and it still seems to be happening... any suggestions?

bump! also anyone have fitment issues with the zyclone/c-one front bumper? mainly the sides =)?

Ok I got my bodykit the other day and did some prefitting today I noticed on the type Z rear lip there is a piece which sticks out in the middle of the lip and I think thats causing issues of wrapping around the bumper, anyone else had a similiar issue?

bump! for the name of the home depot material.

I dont understand some of you guys... you would rather buy a honda which are a dime a dozen, rather than work on a celica which is unique, more of a challenge, and all around better looking than honda.

Yea I just went ahead and ordered it. Thanks guys.