3s distributor on a 5s? |
3s distributor on a 5s? |
Jan 26, 2013 - 11:49 AM |
|
Enthusiast Joined Dec 1, '12 From lancaster ohio Currently Offline Reputation: 0 (0%) |
does a 3s distributor fit on a 5s? im looking to upgrade my electrical system with bigger wires and such but there are no distributors for the 5s
i tried looking here but couldnt find anything so if there is a thread could you link it? thanks This post has been edited by reliqhunter: Jan 26, 2013 - 11:54 AM |
Jan 27, 2013 - 1:17 PM |
|
Enthusiast Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%) |
does a 3s distributor fit on a 5s? im looking to upgrade my electrical system with bigger wires and such but there are no distributors for the 5s i tried looking here but couldnt find anything so if there is a thread could you link it? thanks The 5sfe does have a distributor, it is pre 97 maybe? My 94 GT has a distributor for sure. If you want to upgrade the ignition system I would suggest using an aftermarket external coil which could utilize the existing components. You could also switch to something like the 6AL or 7AL MSD Ignition module. It is capacitive discharge, so it would provide more complete ignition because it works by firing the plugs multiple times at higher power rather than one long weak spark. The MSD ignition is also capable of generating spark well over 10,000rpm. Of course if you switch the ignition module, there will be some modification required. While you could probably piggyback it onto the existing sensors you would negate the need for the Ignitor and ECU controling spark. And Im sure the ECU is much better at mapping a 3-dimensional ignition map than an MSD ignition. If you change the size of the plug wires without upgrading the coil you will shorten the spark duration. The wires have some inherant resistance, lowering the resistance makes the spark shorter but more powerful, increasing the resistance will make the spark last longer but it will be weaker. The toyota engineers had the math equations to calculate this, and Im sure they selected a wire type that was the best compromise between spark strength and spark duration given the OEM equipment. |
Jan 27, 2013 - 2:26 PM |
|
Enthusiast Joined Jan 4, '12 From US Currently Offline Reputation: 6 (100%) |
Bigger plug wires isn't always better. You won't gain anything going to 10mm wires if that's what you're looking for. The only time you should make your plug wires bigger is if it is necessary.
-------------------- 1993 Celica GT Coupe - sold
1994 Celica GT Liftback |
Jan 28, 2013 - 5:40 PM |
|
Enthusiast Joined Dec 1, '12 From lancaster ohio Currently Offline Reputation: 0 (0%) |
does a 3s distributor fit on a 5s? im looking to upgrade my electrical system with bigger wires and such but there are no distributors for the 5s i tried looking here but couldnt find anything so if there is a thread could you link it? thanks The 5sfe does have a distributor, it is pre 97 maybe? My 94 GT has a distributor for sure. If you want to upgrade the ignition system I would suggest using an aftermarket external coil which could utilize the existing components. You could also switch to something like the 6AL or 7AL MSD Ignition module. It is capacitive discharge, so it would provide more complete ignition because it works by firing the plugs multiple times at higher power rather than one long weak spark. The MSD ignition is also capable of generating spark well over 10,000rpm. Of course if you switch the ignition module, there will be some modification required. While you could probably piggyback it onto the existing sensors you would negate the need for the Ignitor and ECU controling spark. And Im sure the ECU is much better at mapping a 3-dimensional ignition map than an MSD ignition. If you change the size of the plug wires without upgrading the coil you will shorten the spark duration. The wires have some inherant resistance, lowering the resistance makes the spark shorter but more powerful, increasing the resistance will make the spark last longer but it will be weaker. The toyota engineers had the math equations to calculate this, and Im sure they selected a wire type that was the best compromise between spark strength and spark duration given the OEM equipment. i wanted to upgrade to an msd system but i couldnt find a 5s distributor to accept it |
Jan 28, 2013 - 5:44 PM |
|
Enthusiast Joined Dec 1, '12 From lancaster ohio Currently Offline Reputation: 0 (0%) |
let me clarify, i have a 95 GT and i want to upgrade the ignition system with msd blaster and ignition system for a better and stronger spark
|
Jan 29, 2013 - 1:49 PM |
|
Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
to gain what? less bank balance?
-------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Jan 29, 2013 - 3:18 PM |
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
there is nothing wrong with the OEM ignition system. it will support anything that you do to your car.
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Jan 29, 2013 - 11:26 PM |
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
JDM YO!!!
nah, get a used one if yours aint working... someone is parting around here, if it aint broke leave it alone -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Jan 30, 2013 - 4:56 AM |
|
Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
a new toyota genuine rotor, cap and lead set and some new plugs is all u need
do the air filter, fuel filter and an oil change and away u go -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Lo-Fi Version | Time is now: November 30th, 2024 - 10:52 PM |