6G Celicas Forums

Thanks.
Actually the emblems are purple :3 lol


Lol, i had planned to dip back when dyc was offering the yellow Wagner sprayer like a year ago but was too scared to follow thru. BUT you did give me the courage to take the leap

I fixed the gun issue. It was some dip that dried in the vaccum hole that formed a mini plastidip cork, lol.

Damn, nice Celica dude.
I was considering wrapping my car in matte white, but after seeing your results I will be research the dip subject.
I am a big fan of the DYI and exterior paint. So my idea was if I damage the fender or something, I would simply fix it up and re-wrap instead of going to someone for a paint job.

And I run into a wall today while backing up. Such a big dent in my rear right above the wheel.

Can you hit me up with some prices?
How much was the gun and can it be replaced with a normal spray gun and a compressor?
How much did you pay for your current stage, as I am not going with clear coat and pearl, just white matte?

Thanks.

Yes you can replace the gun with a regular one. Plastidip sprays on like paint and dries up like rubberish plastic which is removable.

im glad its keeping up to the elements and car wash!
I always thought that it would peel away

It's no vincent_doggy, but I have to say not bad for my first ever shot at DIY upholstery

at first I did think you bought one from vincent. nice job!

Thanks!


Busy past couple of days..

Ditched all the wood (floors and dash trim) and this is the result

did more DIY upholstery:
door cards


shift boot and Di-Noc CF wrapped bezel


and the rest wrapped/installed

not bad, really i would suggest thicker thread, so that it stands out better, but you may already have it, just cant tell from the pics... but the boot looks cool..

may i suggest, go to ebay and search scrap leather, you will be surprised, i did my door cars in real leather.

I like it

Thank you


Thanks. When I was getting supplies and what not I bought 2 different threads, one heavy duty thread and one even thicker but it kept breaking about halfway through the stitch

So I ended up with the first thread, but after it was all said and done I like the way it came out. Adds some accent but doesn't say "look at me, look at me" lol

Sweet, I'll have to look up some scraps on ebay!


Also, new shift knob!

http://www.ebay.com/itm/Scrap-Leather-Genu...=item20d374bf98

Hot damn thats a pretty solid deal..

Just paid most of June's bills early so I'll give it a looksy in a week or two, maybe start cranking out some goods

Plus I still gotta save some extra cash to get more emblems made, since there has been recent demand for them lol.

so much better without the wood

Serious question, what technique did you use to wrap the shifter surround? I have tried this so many times and really struggle with the sloping bit, are you heating teh wrap and pulling in from the middle?

Thanks.

Yeah, I used a heat gun. Used an exacto to cut an X from corner to corner BUT leave some space so that when you pull and tuck you don't have have an uncovered spot. I misjudged my cut and had to try an blend a piece in.. You can kind of see in the far side of surround in the last pic

edit: duplicate post - durh me!

This post has been edited by Dennisthe10: Jun 7, 2013 - 7:06 AM

Thanks man, I'll take your advice for attempt number 73,000 I'm a total perfectionist when it comes to wrapping and hate myself a little bit more every time i notice a crappy bit This is my final piece that I cant quite nail

Smkr3w - thank you, I persevered and got a near perfect result Totally owe you on this as nearly did the old 'cut a template and ignore the dippy bit' method which I would never have been happy with

Congrats man! glad it worked out

Damn dude, i haven't been on in months. Your car is looking sick!

Thanks man
Welcome back