6G Celicas Forums

I have two extra 15 mm wheel spacers I don't need. I do not have any extra studs to go with them, only the spacers. Open to offers.

AC Delco inner tie rod ends. Brand new in box, never opened. Rock Auto apparently sent a set to me and a set to my parents' house. Cost $80 shipped, don't need them at all. Not looking to get my money back. My loss is your gain.

This post has been edited by richee3: Oct 19, 2013 - 8:19 PM

PM'd

Don't really know much about spacers lol but do you think I could use them on my back wheels?

Replied.




Yes. You'd just need to buy some extended wheel studs to go with these spacers since I don't have them. 10 mm isn't a huge spacer but they make a noticeable difference.

If you want to flush them out. I think you'll need 25mm+ spacers. Lol. You're better off with buying adapters/spacers. So you wouldn't need to install extended lug nuts and you can also get the ones that converts from 5x100 to 5x114.

Any specific reason to convert to 5x114? My wheels are 5 bolt universal so I technically could

Since your wheels are universal then if I were I would get the adapter. 5x100 is really limited to aftermarket wheels. 5x114 opens your wheel market, double than what you'll find in 5x100 market. Lol. Its really hard to find a perfect set of wheels for 5x100. Like for me. I want the xxr 535 but they don't come in a low enough offset or wide enough rim for me to flush out with minimal use of spacers. So.....i might end up going with the 527 since they're universal.

Bump. Also adding a Kirkosarus poly motor mount insert. Pictures still coming, if I can ever remember.

Which mount does it fit?

Front and I think the rear too but don't quote me on that. I've had a front insert for over a year now and just bought a brand new pair so I can get the rear insert. I think the front and rear inserts are identical but they may not be.

I would need the rear over the front with the 1MZ. I'll research it.

Like I said, I think the front and rear are interchangeable but I'll be able to confirm that in a couple of days. Unless someone jumps in here and confirms it first.

Pics of the spacers!




Pics of the mount insert coming in the next couple of days.

Confirmed that the front and rear mount inserts are definitely different. Since I only need the rear, here are pics of the front:

Man, I've been wondering how just one insert was beneficial. I had this idea that it was a single one, and not a set! Hahahaha! This makes so much more sense!

It is beneficial to have just one. It's that much less flex in the motor mounts. Granted, having a pair is more beneficial, but having just a single insert will still help. I've just had the front insert for the last year and I'm getting ready to add my new rear insert. Since I had to order a new pair to get a rear mount, I have an extra front mount that I don't need. It's the same insert in the pictures, just two different angles.

Please confirm the spacers are 10mm not 15 (picture looked a little thick).

Would you take $20 for spacers?

I already have some 10mm longer studs (uninstalled).

I'll grab a tape measure tomorrow. I bought these from Diegohiga who said they were 15 mm. They are the same thickness as my 10 mm spacers I have on the car now. $20 will work though.

From the sounds of it, I have a spare set of AC Delco inner tie rod ends at my parents's house. Anybody need them? They cost $80 shipped from Rock Auto and I have no use for them. I have a set here and a set there, apparently.

Front mount insert sold, added brand new in box inner tie rod ends.

hmmm.. $40 on the tie rod ends? also interested in your antenna... maybe we coudl work out shipping it together..