6G Celicas Forums

im trying to clear some space in the garage, prices are obo

Everything is already packed ready to ship. i used USPS flat rate boxes, depending on the size, you guys car estimate shipping accordingly. basically.

small - $6
medium - $13
large - $17


Heres a list of the parts. pics upon request for parts not pictured.

NEW PARTS for 5sfe 2.2L
1. Timing Belt kit : timing belt with tensioner and pulley. ($40 Shipped)
2. Pistons and rings ($50 shipped)
3. Oil Pump Gasket and seals. Part # 15188-03011 & 15165-74020 ($5 shipped for both or $3 each.)

Used
1. Timing belt kit, (new belt used pulleys and tensioner) - $10
2.Timing Belt covers, Top and bottom - $10ea. or $15 for both
3. Used piston, approx 130K miles, they were fine when i had them inspected from the machine shop. ($10)
4.Oil pump and water pump, same car, no issues when removed. ($15)
5. 2 X Water outlet - the part that holds the thermostat - $5
6.Oil Pan - $20, great condition, no dents or scrapes. (its heavy and big so shipping might be expensive)
7.Fuel rail with all 4 green injectors ($50)
8. Exhaust manifold with the inner shield ($10)
9. Brake Caliper - front right side ($12)
10. 2 X PCV Valves ($5)
11. 7afe alternator out of a 94 corolla ($20)




Hatchback Taillights - great condition ($65)
Fender side markers OEM - amber ($10)
Headlight rubber seals ($10)
Driver side window regulator w/rail ($10)
5sfe Air intake box ($15)
Front bumper indicator flasher ($10)
Driver side mirror. White $15
drive side door handle. $whatever - name your price
OEM Speakers, $whatever - name your price
6.5 speakers - dual brand and sony xplode - $5
10" Sub woofer $15 (company : American Bass) 500W

Do you have motor mounts??

ill take the drivers side window regulator and motor. paypal ready

damn i wanted this.. if he falls through i got dibs.

is this basically all one would need (minus the switch and wiring) to add power windows to a manual window car?

I want the headlight rubber seals. Assuming they come with a complete set of clips?

I do but they're in horrible condition, u can probably use them for the frame for the polyurethane inserts.
If interested make me an offer.


For the regulator, I'll take pics and send it with my Paypal via pm tomorrow


I do have another but some parts were damaged so not sure what's salvageable, ill post pics here tomorrow as well


And I'm not sure what else will be needed for the conversion



And for the headlight seals, I don't have clips, just the rubber part, if I remember, the high beams were attached to the bumper but ill check and pm u picks

Thanks guys

This post has been edited by Malhar95: Oct 24, 2013 - 11:49 PM

Are the mounts' bases good? I need all except the passenger side motor support for testing purposes so the condition of the bushings is irrelevant...

Let me know!

Do you have the intake tube that goes from the intake box to the throttle body as well as the actual box?

here are the pictures:


regulator:











and then the broken regulator #2. the line was broken but the motor and rail are fine.






i only found 1 mount, ill keep looking for it but if i remember i threw it away.
(only had front and rear, no sides)






found all headlight seals. have another pair for others.




i only have the box, sold the tube a long time ago sorry.

Regulator sold. Still have the second one for parts ( life motor or rail) only the line is broken

Bump

got the regulator in and installed it! thanks a lot!

Does the Left side marker have the pigtail with it? If it's still available, I'm in need of one

Care to send that mount over to me for research purposes? Or perhaps measure it for me with a tape measure? Please let me know through PM