6G Celicas Forums

3rd gen 3SGE motor that was used for spares and mock-up of a couple custom turbo kits.

The head is was ran in one of my Celicas for around 2 years until it was swapped out for a ported head.

Includes: Valve train, gears, camshafts - untouched since the head was pulled - all 3SGE parts.
Top feed fuel rail and stock 3SGE injectors (295cc - I ran 550cc injectors without problems).
Side feed intake manifold with throttle body - ACIS may be welded shut as it created havoc under boost.
valve cover, alternator bracket and hangers present, alternator
Extra bosses have been drilled / tapped to match the turbo exhaust manifold
coolant elbow is either from a Curren or Celica.

The block appears to be in good shape; no obvious signs of problems. I pulled the lower oil pan off and everything looks like the factory original parts.

Includes: Rods / Crank / pistons
Oil pump / oil pans / oil pickup
Water pump / lines / thermostat housing
- There's no power steering pump and the pulley on the A/C pump was mangled during shipping.


I travel to Chicago quite often and occasionally to Detroit, so I can deliver / meet in this area to avoid shipping. Otherwise will need to be sent via freight. Will post pics later today.

This post has been edited by scothaniel: Mar 20, 2014 - 10:26 AM

Pm'ed

With custom td05 turbo kit :)

Which part of Michigan are you from?????

Currently Grand Rapids