6G Celicas Forums

FS: 4 X 20mm Ichiba Spacer : $135 shipped : 5x100 : 54.1 centerbore : Includes 20 extended studs : Located in Hanford, Ca : Text me at 1-559-380-5764.

Im willing to part out for $75 shipped for a pair if split the set with another buyer.

Note the two painted red are kind of stripped but they can still be used. I've tested them all and those two are the only ones that needs a bit more tug. It didn't strip my nut and it reversed out fine.

Here's how I installed my extended studs. Not hard to do.
http://www.youtube.com/watch?v=B0VIEGcJJ-U



This post has been edited by ILoveMySilly97: Apr 4, 2014 - 4:55 AM

Updated post.

bump!

My offer still stands.

was it you who was texting me the other days?

No, I sent you a message on here.

Oh yea. Sorry. Deleted the message. You wanted only a pair right? If no one buys it as a set anytime soon then I'll end up selling you a pair.

I offered to buy a pair too. Would have worked perfect.

http://www.amazon.com/gp/aw/d/B004AGH6KW?c...354&sr=8-16



Correct me if im wrong but isn't this the same thing.
If it is isnt yours kinda pricey

It's similar but different. Your post has only a pair so only two spacers. Two for the front or two for the rear. Also it's bolt on so the stock studs is going to be hitting into your rim unless your rim has extra space to clear the stock studs. Mine has a full set which has four spacers for all four corners. Mine is extended studs so you'll need to press in the new extended studs and don't got to worry about the stud clearance issue. Price wise. I'd say mine is reasonable. If you buy a full brand new set it's double what you posted which is around $240-$260 total.

This post has been edited by ILoveMySilly97: Mar 3, 2014 - 1:40 AM

Just to correct you on one thing, stock studs will be fine with 20mm bolt on spacers. The spacers are thick enough so that the stock studs don't stick out and hit the wheel. If you have extended studs, that's when you'll have a problem with the studs hitting the wheels (unless there's a space in the wheel so that they don't).

^no mkernz. What I said was correct. You got it the other way around. Extended studs replaces the stock studs so the stock studs wont even be on your car anymore. There for how is it you only have the 5 extended studs on each corner that well go through the 5 holes in each rim. The bolt on will double your studs on each corner. That's when you have the rim space/clearance issue.

You guys are saying the same thing. Mike said that stock studs with 20 mm bolt on spacers will be fine, but extended studs with bolt on spacers will be a problem. Mike was referring to bolt on spacers only. Simple miscommunication.

Oh. I see what you mean now. Im not too sure if the 20mm bolt on is thick enough to clear the stock stud. I never confirmed it before. All I know is that our stock studs is less than 25mm long so 25mm+ bolt on is a for sure no stock stud issue.

I'm confirming it because I had 20mm bolt-on's at one point...

bump! Mkernz needs a pair buddy. Lol.

I can take them if nobody else is in line.

Well I want them, but I only need two cause I'm moving my 15mm's to the front (replacing the 10mm's already there), and putting the 20mm's in the rear.

I guess I didn't specify. I can take the other pair if Andrew isn't interested in them anymore.

oh alright, swwweeeeet!
I'll take the two bad studs if you need all the good ones?
I already have extended studs so it's not a huge deal to me