6G Celicas Forums

Give a bump here, pit's car was one of the first I saw on 6gc and kept me around. Hope it goes to another 6gc member

the car is exactly as it appears - i have a ton of extra parts but the actual body and such is what you see - the original build was in a 1995 GT by member punisher on this site - i paid 7000 for it to get a complete piece of junk - since then i bought etaks white 99 and moved all salvageable parts to it - the 1995 had frame damage - the white 1999 has never been in an accident - the motor was garbage as Punisher had tried to rebuild it several times - this motor was sourced from a 1992 MR2 from new york with only 42xxx miles on it - i had it completely rebuilt at that time with the oversized pistons, forged rods, etc etc by a professional rebuild shop - i have ALL receipts for everything - I AM VERY SAD TO LET THIS CAR GO - I need to emphasize that I do not want to sell it but it has been sitting for 2 years without any serious time put into it - It has been running every month or so to keep away dry rot - I drive it around the block to keep it running smooth - I simply dont have the time to finish it - I can work out a payment plan if someone is seriously interested - long distances this vehicle would need to be trailered - even short distances I would recommend it since its clearly illegal with no exhaust past the downpipe - if someone has time - the EXTRA parts should cover the cost of the car - its comes with a 99 5S block in good condition, rebuilt fe head, gte head, extra cams for both, jbl amp, kicker amp, kicker subs, memphis audio subs, sony subs - just a lot of stuff that needs to get out of my garage - I may throw in the engine hoist and leveling kit - i havent decided how much work i'm going to want to do on future autos yet, I would recommend a small box truck for all the extra parts

I'm open to offers - but I do believe 4500 is a more than fair price - once again I paid 7000 to start this project and have added so much more money into it - a payment plan could be discussed with a potential buyer with proper paperwork included

BUMP

I have the cash and would really love buying it from you. My car that I was hoping to start with the new engine swap, just got side swiped so it trough me back just a little but I'm back on track however I'm in the Bakersfield, CA area and my biggest concern is making sure the car is California smog legal since I would like to make it my daily driver and how to get it here from Pittsburgh.

I don't have a truck and would need some serious cash to get it here. sorry man I hope someone in the Pittsburgh area gets a hold of it.

Did you sell yet? I'm interested and maybe just close enough to make it happen..
Thanks

It is still available... feel free to call me directly... My number is on the first post.

How much will you sell your 404 lip kit for I have cash in hand?

It's for a prefacelift, it has not been installed, still primed with boomer sides, very rare, send a pm with an offer if you want to pick up

Pm'd u for the complete car sale

I texted the number you gave me with no response. Mine is 724-396-6546. Everything is listed in my profile... all the parts listed are included. It has a custom front 94 bumper (cut for intercooler w/ mesh) with a 404 lip kit, boomer sides, rear lip, (404 kit is still in primer) JDM blacked out projectors with HID lights, 2nd gen 3sgte engine with oversized forged pistons and forged rods with very low mileage since rebuild, e153 manual tranny from v6 camry (longer gear ratio) with inserted MR2 LSD - the plastics are currently removed but have all of them included... the door panels are the panels from an eight speaker premium audio setup with all speakers included, doggy TRD spoiler with carbon fiber insert, TRD quickshifter, Racing steering wheel with disconnect, in dash nav, custom A/C controller, AVCR, greddy turbo timer, leather seats, 7th gen wheels, kirkosaurus mounts (engine and suspension), metal endlinks from clubmr2, tein springs, suspension techniques bars (the newer version), cusco front strut bar, carbon fiber hood, jdm tails, sparco carbon fiber pedals, trunk battery relocation - theres a lot more too, thats the list off the top of my head - its a steal

stuff included but not installed include
3 subwoofers - 2 dual kicker, a sony, and a memphis
1 JBL Amp for the memphis
1 Kicker amp for the kickers
1 pioneer amp for the sony
lambo door hinges
maybe motor hoist
all chiltons manuals and guides, paperwork
carbon fiber hood pin kit
nissan altima pushbutton start
fe head
99 5s block
TRD headgasket for 5sgte
gte head
gte cams
fe cams
sri for st/gt
plus a bunch more parts i cant think of right now

i need this thing out of my garage - i'm going to start parting it out and dump the shell for scrap, price does not include shipping
custom cold air intake - for st/gt - $15
Forge Motorsport recirc valve - $110
XS Power intercooler (HUGE!) w/ 2.5" stainless steel IC pipe - $100
Tial 38mm external wastegate - $200
Apexi AVC-R Electronic boost controller - $350
o2 gauge brand new - $150
TRD Quickshifter w TRD knob - latest version - i bought the last one available in the states five years ago - $225 - SOLD
Cooling Plate carbon fiber - $45 - SOLD
battery relocation - $120
stainless oil feed/return lines - $100
custom blue climate control unit - $100
Lambo hinges - $250
twosrus endlinks - $95
suspension techniques sway bars brand new - $350 - SOLD

BUILT MOTOR w/ TURBO - $2250

TRANSMISSION: $1750
-99 Camry V6 5spd transmission w/ 95 JDM MR2 Limited Slip Differential
-stainless clutch line
-extended slave pushrod
-Competition Clutch Stage 4 - 6 Puck
-lightened flywheel

-cusco front strut bar - $85
-Tein S-tech springs w/ KYB struts, will not separate, may be heavy to ship, both are older but still in good working condition - $100

-erebuni 404 front lip for prefacelift - $150
-rear lip - SOLD
-Boomer sideskirts - $300
-VIS zyclone carbon fiber hood - $350 - SOLD
-7th gen gts wheels - $225
-custom front grilles incl. intercooler cutout (front bumper with cutout) - $125 - black in color
-Blacked interior JDM projectors - $125 - in rough shape....
-JDM Tails - $115 - SOLD

alpine type r 6.5 - $45/pair
memphis 8" subs - $150
memphis 12" w box - $100
kicker dual 10's w/ box $75
kicker amp - $50
sony explod 12 - $35
pioneer amp - $25
JBL 4 way amp new in box - $225
black leather seats - $350 - SOLD
eclipse AVN TS DD navi headunit - $450
DCW triple gauge - $75
Sparco Carbon Fiber Pedals - $25
NRG Racing Steering Wheel and quick release Hub - $350
5s block 99 - $750
fe head rebuilt (still in plastic) - $450
TRD headgasket 99 - $100
gte head - $125
eight speakers doors - $100 - SOLD
greddy turbo timer w/ harness - $100
kirk suspension and motor mounts - $100
walbro 255 pump - $100
carbon fiber hood posts - $20
Carbon Fiber TRD wing - $150 - SOLD


i also have parts for the 3sgte swap like
st205 shifter cables
motor mounts
custom side feed intake manifold
two air meters

This post has been edited by pittfirefighter: Apr 15, 2014 - 9:14 PM

Pm sent.

Got another pm..

its a shame she is getting parted.... shes a beauty clark




This post has been edited by pittfirefighter: Mar 30, 2014 - 10:22 AM

I'm interested in:

Front bumper.
Complete radiator fans with motors; fan switch sensor.

Let me know price shipped to 90017
Thanks.

This has the half size radiator to make room for the turbo....
Is this what you want?

Money sent last week, waiting for a reply from you.. Thanks.

I'm in the same boat as you, sent a deposit and he won't respond to my PM's now. I feel like I had the same issue a year or two ago when I was trying to buy parts off of him. Poor communication.




This post has been edited by mkernz22: Apr 7, 2014 - 8:05 AM

Replied to all PM's - 1st shipment tomorrow - Everything is packed up and ready to ship, everybody that has paid in full is shipping out tomorrow

Tracking numbers will be sent via PM once items have shipped. Expect numbers tomorrow night or Wed Morning. Thank you.

are the rear wheel wells any good where the mudflaps mount?

Just picked up number three and it has the midwest mudflap rot on the rears on both sides, and I could use a cut out, to 48104