6G Celicas Forums

I'm looking to buy some lowering springs but I want to look lower then normal I baught some and it barely got lower hardly noticable got any suggestions? Thanks

sounds like u need coil overs than.. springs give you 1.5 and some say they get lower over time.


do you really need to get springs? if so what did u get that you happen to not like?

Suppose the real question is what springs did you buy?

I got these they're alright but the height is almost the same if not the same



M2 Performance Toyota 90 91 92 93 94 95 96 97 98 99 Celica Lowering Low Springs by M2 P... http://www.amazon.com/dp/B003W2MQDM/ref=cm...d_c3fEtb10287MG

There's your problem, that's more or less along the lines of the garbage on eBay. Hopefully you can return them and get your money back and then buy some real springs from Tein or some other name brand.

That's my car on Tein springs as suggested by box.
I will also add, I lowered mine with the springs, and my passenger front shock bottoms out really easily. It was probably already dying before I lowered the car, but lowering it has killed it completely. If you keep the stock shocks they will be blown in no time, then you'll be up for x4 new shocks on top of the springs. Also, I don't think this is related to it being lowered but my top bearings are also now shot, they didn't make any noise before lowering and straight after lowering they started creaking and clunking... Well I hops it's the bearings...
Not sure about over there, but here in Australia the difference between coil overs and springs+shocks is only $200-300. Coil overs also them give full dampening and height customisation, well making up for that extra outlay.

Over here the Megan EZ Street isn't much more than a set of new springs, struts, and mounts. So that might be another option.

Can U send me some links for the coilovers please I was looking in ebay but they are like $1,000 that's why I was looking for some lowering spring so it would be cheaper.

Lowering springs if you shop around are still around $200 cheaper, but if you want to drop more than 1.5" coil-overs are the only way to go. Here's the link: http://www.ebay.com/itm/Megan-Racing-EZ-Co...952&vxp=mtr

Can even try the best offer to save more money.

Approximated Lowering Rate: Approximately 2" Front & 1.75" Rear

Getting real springs or not.. He is not going to get any lower. Hate to see you buy another set and get the same height.. Buying tein or anyother brand will only improve the feel of the car.. Not much difference in the height..

Coilovers FTW..

The problem lies within the fact the cheap springs didn't do what they were supposed to, even the 1.5" drop with the Tein springs is definitely noticeable.

Im pretty sure thats about the same height as stock. How much would I be looking at to buy some decent coilovers? The back looks is lower then the front but thats still the same as factory
(rims were taking didnt like them too fat ,now back on steelies)

This post has been edited by Yoni502: May 18, 2014 - 11:44 PM

First off.. Nasty set up..
that set up i would def get coil overs man.. You will never get it perfect with springs..

Cheapest coilovers are EZ Streets.. $699 <BUT BEST OFFER can be used..

http://www.ebay.com/itm/Megan-Racing-EZ-Co...952&vxp=mtr

The Megan EZ Coilovers come with springs and struts so install is tits..

If you already got new struts you can try to find just the Coil over sleeves and springs.. but they are hard to come by.
Search Ebay my friend..!

you think those would fit my car cause mine is a st not a gt? thanks

Did you install the front springs in the rear and rears in the front?
Because my teins lower the front more than the rear but both Are very noticeable.

it will fit. Just installed them on my ST last month.
best and cheapest option for coilovers. I could go lower but the roads here suck.

Yes I installed then on. All 4 wheels but no difference it just got alittle smoother but not lower.

Oh okay thanks I might save up for those thanks for the help

Oh okay thanks I might save up for those thanks for the help

no problem. yeah, I had a set of TRD springs I was gonna put on but ended up selling those to fund these since springs + new struts + strut mounts and whatever else adds up to just a little bit less than the coilovers.