6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> FS: Parting out my 94 GT
post Jul 25, 2014 - 9:57 AM
+Quote Post
yfn16

Enthusiast
*
Joined Mar 5, '08
From Knoxville, TN
Currently Offline

Reputation: 1 (100%)




I am parting out my 1994 GT. I've also got some extras since it was turbo'd. Just message me if you'd like anything off of it. Email is faster if you'd like to do it that way. My email is amsoil37918@gmail.com I live in Knoxville btw but I will ship whatever you'd like. So... Email or message me. I'll send a pic and give any info you'd like on the part. Then I'll give you a price. You guys know how this works... Cheers!

The TRD short shifter sold first thing. I still have the oem shifter that I had installed before the TRD. It has been shortened by 3 3/4 inches if I remember correctly.

A bunch of the parts I had installed I had extras of. Below is a list of some of the major parts I still have with their condition listed.

Extras that are still available:

Performance:
New Walbro Fuel Pump
New Moroso 3SGTE Oil Pan
Used MSD 2 Bar MAP Sensor
New MSD 2 Bar Map Sensor
New DocRace 3SGTE Manifold
New Turbonetics t3/t4 turbo
New Tial MVS 38mm Wastegate
New HKS Ti Muffler
New Mishimoto Intercooler
Used Mishimoto Intercooler

Suspension:
Tanabe Lowering Springs

This post has been edited by yfn16: Jul 28, 2014 - 7:32 AM
post Jul 25, 2014 - 8:12 PM
+Quote Post
Batman722



Enthusiast
*****
Joined Mar 8, '04
From Newport, RI
Currently Offline

Reputation: 63 (99%)




I'm interested in the TRD short shifter.

Got any pics ?


--------------------
post Jul 26, 2014 - 2:28 PM
+Quote Post
Phantom6gc

Enthusiast

Joined Apr 15, '13
From VA
Currently Offline

Reputation: 0 (0%)




Im interested in some interior panels if you are willing to part out with them. Center arm rest console, and almost all the panels in the trunk.
post Jul 27, 2014 - 5:05 PM
+Quote Post
yfn16

Enthusiast
*
Joined Mar 5, '08
From Knoxville, TN
Currently Offline

Reputation: 1 (100%)




QUOTE (Phantom6gc @ Jul 26, 2014 - 2:28 PM) *
Im interested in some interior panels if you are willing to part out with them. Center arm rest console, and almost all the panels in the trunk.


You'll have to let me know which panels you'd like exactly. I still have most of them though. As far as the center console goes, it need reupholstered. I can send you pics if you'd like.
post Jul 28, 2014 - 3:34 AM
+Quote Post
mandrek



Enthusiast
***
Joined May 4, '05
From western MD/NOVA
Currently Offline

Reputation: 2 (100%)




interested in rear brakes (assuming its disc) i'm looking at doing the 5x114 conversion as well, but im not sure what exactly ill be needing to omit... im thining that all that ill need is the knuckles, and all attached brake lines/cables... but not any of the calipers or rotors... (so that is dead weight that can help lower over all cost and shiping too)


let me know

thank you


--------------------
post Jul 28, 2014 - 7:34 AM
+Quote Post
yfn16

Enthusiast
*
Joined Mar 5, '08
From Knoxville, TN
Currently Offline

Reputation: 1 (100%)




QUOTE (mandrek @ Jul 28, 2014 - 4:34 AM) *
interested in rear brakes (assuming its disc) i'm looking at doing the 5x114 conversion as well, but im not sure what exactly ill be needing to omit... im thining that all that ill need is the knuckles, and all attached brake lines/cables... but not any of the calipers or rotors... (so that is dead weight that can help lower over all cost and shiping too)


I'll make sure all the parts you need are there in in good condition tonight. I'll snap some pics and pm you the price.
post Jul 28, 2014 - 5:24 PM
+Quote Post
Phantom6gc

Enthusiast

Joined Apr 15, '13
From VA
Currently Offline

Reputation: 0 (0%)




QUOTE (yfn16 @ Jul 27, 2014 - 5:05 PM) *
QUOTE (Phantom6gc @ Jul 26, 2014 - 2:28 PM) *
Im interested in some interior panels if you are willing to part out with them. Center arm rest console, and almost all the panels in the trunk.


You'll have to let me know which panels you'd like exactly. I still have most of them though. As far as the center console goes, it need reupholstered. I can send you pics if you'd like.



Pm'ed also if you have pics those would be great biggrin.gif
post Jul 29, 2014 - 5:50 AM
+Quote Post
mandrek



Enthusiast
***
Joined May 4, '05
From western MD/NOVA
Currently Offline

Reputation: 2 (100%)




QUOTE (mandrek @ Jul 28, 2014 - 4:34 AM) *
interested in rear brakes (assuming its disc) i'm looking at doing the 5x114 conversion as well, but im not sure what exactly ill be needing to omit... im thining that all that ill need is the knuckles, and all attached brake lines/cables... but not any of the calipers or rotors... (so that is dead weight that can help lower over all cost and shiping too)


let me know

thank you


awesome!! thank you that would be great! now there are a few other items that i would be interested in,. so when you PM me the pix and info, if you could do the same for these as well that would be awesome!

the other items i am interested in are:
New Walbro Fuel Pump (this just the pump? [assuming wally255], or also have the install kit? )


New/Used MSD 2 Bar MAP Sensor (why did you have to get a new one ?, condition?/cost plz)


also interested to know if some of the other stuff on the car is up for sale

like the guages, ( all of them and associated probes/sensors)


--------------------
post Aug 1, 2014 - 7:38 AM
+Quote Post
yfn16

Enthusiast
*
Joined Mar 5, '08
From Knoxville, TN
Currently Offline

Reputation: 1 (100%)




Sorry I haven't been able to get back with a few of you. I am out of town until Monday so be patient and I'll respond to your requests when I get back.
post Aug 1, 2014 - 8:17 AM
+Quote Post
KAOS



Enthusiast
*****
Joined Apr 18, '06
From Calgary, Canada
Currently Offline

Reputation: 37 (100%)




What transmission were you running with the Turbo'd set up?


--------------------
post Aug 1, 2014 - 8:17 AM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




How are the motor mounts? Specifically the front and rear (trans) mount.
Assuming they would still work with the 5sfe on a GT/Liftback


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Aug 4, 2014 - 10:40 AM
+Quote Post
mandrek



Enthusiast
***
Joined May 4, '05
From western MD/NOVA
Currently Offline

Reputation: 2 (100%)




bump


--------------------
post Aug 4, 2014 - 12:53 PM
+Quote Post
yfn16

Enthusiast
*
Joined Mar 5, '08
From Knoxville, TN
Currently Offline

Reputation: 1 (100%)




QUOTE (KAOS @ Aug 1, 2014 - 8:17 AM) *
What transmission were you running with the Turbo'd set up?


I was just running the stock transmission.

QUOTE (jordisonjr @ Aug 1, 2014 - 8:17 AM) *
How are the motor mounts? Specifically the front and rear (trans) mount.
Assuming they would still work with the 5sfe on a GT/Liftback


The motor mounts should be fine. I will check them as soon as I can. I just got back in town about an hour ago.
post Aug 4, 2014 - 1:02 PM
+Quote Post
yfn16

Enthusiast
*
Joined Mar 5, '08
From Knoxville, TN
Currently Offline

Reputation: 1 (100%)




QUOTE (mandrek @ Jul 29, 2014 - 5:50 AM) *
QUOTE (mandrek @ Jul 28, 2014 - 4:34 AM) *
interested in rear brakes (assuming its disc) i'm looking at doing the 5x114 conversion as well, but im not sure what exactly ill be needing to omit... im thining that all that ill need is the knuckles, and all attached brake lines/cables... but not any of the calipers or rotors... (so that is dead weight that can help lower over all cost and shiping too)


let me know

thank you


awesome!! thank you that would be great! now there are a few other items that i would be interested in,. so when you PM me the pix and info, if you could do the same for these as well that would be awesome!

the other items i am interested in are:
New Walbro Fuel Pump (this just the pump? [assuming wally255], or also have the install kit? )


New/Used MSD 2 Bar MAP Sensor (why did you have to get a new one ?, condition?/cost plz)


also interested to know if some of the other stuff on the car is up for sale

like the guages, ( all of them and associated probes/sensors)


Walbro fuel pump: I will check to see if we have an install kit as well, but I don't think that we do.

Used MAP Sensor sold. All that's left is the new 2bar. I'm going to ensure that it's the 30lb tonight. If it is I'll take $45 shipped.

The gauges are all being used in other cars we have.

Everything is for sale and is negotiable.
post Aug 14, 2014 - 7:55 AM
+Quote Post
yfn16

Enthusiast
*
Joined Mar 5, '08
From Knoxville, TN
Currently Offline

Reputation: 1 (100%)




Anyone that is still interested in the parts they inquired about needs to reply or message me. There are others that will claim your parts if I don't hear back from you.
post Aug 14, 2014 - 9:35 AM
+Quote Post
toyota123

Enthusiast
**
Joined Jan 13, '12
From Georgia
Currently Offline

Reputation: 3 (100%)




Whats the drop rate on the springs? Condition, and price please


--------------------
97 Celica GT liftback DD/ project
96 corolla back up DD
post Aug 14, 2014 - 6:11 PM
+Quote Post
Arturio55

Enthusiast
**
Joined Mar 6, '13
From New jersey
Currently Offline

Reputation: 4 (83%)




How much for rear disc brake conversion?


--------------------
QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM) *
I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league.
post Aug 15, 2014 - 2:09 AM
+Quote Post
Warapparel

Enthusiast
*
Joined Mar 4, '12
From San Francisco, CA
Currently Offline

Reputation: 8 (100%)




How much for the hks muffler? Do you have the cargo cover available too?

This post has been edited by Warapparel: Aug 15, 2014 - 2:10 AM
post Aug 17, 2014 - 2:26 PM
+Quote Post
mandrek



Enthusiast
***
Joined May 4, '05
From western MD/NOVA
Currently Offline

Reputation: 2 (100%)




yes still interested.. about all i asked for... please let me now what your rates are.. thank you


--------------------
post Aug 18, 2014 - 11:41 PM
+Quote Post
VavAlephVav



Enthusiast
****
Joined Dec 3, '13
From Missourah
Currently Offline

Reputation: 0 (0%)




ECU works great and got me back on the Road.


thanks!


--------------------
Bust a Deal; Face the Wheel.

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 26th, 2024 - 12:49 PM