6G Celicas Forums

Hello people of 6gc,

I recently bought my 95 celica 3 days ago and it came with a Clifford car alarm system.

It was a straight forward alarm that only locks and unlocks, so i'm guessing its a low end kind.

About 2 days ago, the remote would lock and unlock the car but it wouldn't arm the alarm or make the chirping noise.

I think I probably hit the something with my foot while driving since the wiring are right under the pedals.

Now the alarm light is always on even while driving and I tried to inspect under the pedals but am a little lost.

Do i go about resetting something in order to fix this problem?

Look on the clifford website and see which car alarm you have. Then look up a video on how to install it. Check all the connections and also look at the manual on the clifford website. There should be a way to reset it (the valet mode button should be the programming button as well).

Good luck!

Ok, apparently the system was in valet mode the whole time. I guess my foot flipped the switch by accident.

Yeah... whoever installed the alarm system placed the switch in the worst spot. Which is right next to the clutch.

LOL somewhere where things move around constantly. Good stuff

Also welcome