 Tigawoods' 1995 Celica, Racing n Stuff |
  |
 Sep 30, 2014 - 7:28 AM
|
 
|
 Enthusiast  Joined Mar 6, '12 From Brisbane, Australia Currently Offline Reputation: 6 (100%)  |
QUOTE (Tigawoods @ Sep 30, 2014 - 5:55 AM)  how in depth I write up my progress depends on how frustrated I get when I am doing the work hahaha. And its inevitable some things are going to infuriate me along the way. I am going to go with a lightweight FW. Thank you for reminding me too because I had planned on keeping my 5SFE clutch setup for the motor rather than going with a hybrid setup. I need to look at the differenced and pro/con's of the 5SFE and 3SGE flywheel. I found cams at an OK price, they are mild, comprable to the colt cams for the 5sfe. I hope I get mine started by then! Ill keep an eye on your build! Why would you need a hybrid setup at all? If you are looking for a beams with the LSD transmission then wouldn't you just keep it all 3S-GE? I have a couple of leads on reasonably priced C-One 3S-GE flywheels if you are interested. I'm not sure of how much of a 'build' it will be yet. My only set requirements at this stage are LSD and lightweight flywheel. Still deciding whether or not to start doing cams / EMS etc. --------------------  SOLD :( 1997 ST204 Celica ZR -----> See it here on 6GC! 2013 October Celica of the Month XD Now: '00 NB8B Mazda MX5 -----> See it here in off topic! |
|
Sep 30, 2014 - 8:18 AM
|
|
 Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
Ive got a motor lined up already and will be using my S54 trans I have in. It would just make more $ sense since I just put in a new clutch just last winter and would hate to have to try and sell it and spend $ on a whole new setup. All I really need ... or WANT i should say is a lighter FW and the 5S is only a few MM less in diameter than the 3SGE.
As for a hybrid setup I think I confused 3SGE parts with 3SGTE parts. http://www.6gc.net/forums/index.php?showtopic=89910%5Bb I was thinking of a 3SGTE clutch disk with a 5sfe spline. I am scatter brained since the build really isnt at my front door yet, I havent really lasered in my focus in some areas haha This post has been edited by Tigawoods: Sep 30, 2014 - 8:21 AM --------------------  1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
|
Sep 30, 2014 - 8:33 AM
|
|
|
Enthusiast Joined Mar 6, '12 From Brisbane, Australia Currently Offline Reputation: 6 (100%) |
QUOTE (Tigawoods @ Sep 30, 2014 - 9:18 AM) Ive got a motor lined up already and will be using my S54 trans I have in. It would just make more $ sense since I just put in a new clutch just last winter and would hate to have to try and sell it and spend $ on a whole new setup. All I really need ... or WANT i should say is a lighter FW and the 5S is only a few MM less in diameter than the 3SGE. As for a hybrid setup I think I confused 3SGE parts with 3SGTE parts. http://www.6gc.net/forums/index.php?showtopic=89910%5Bb I was thinking of a 3SGTE clutch disk with a 5sfe spline. I am scatter brained since the build really isnt at my front door yet, I havent really lasered in my focus in some areas haha haha, that makes sense then! 
-------------------- SOLD :( 1997 ST204 Celica ZR -----> See it here on 6GC! 2013 October Celica of the Month XD Now: '00 NB8B Mazda MX5 -----> See it here in off topic! |
|
Oct 2, 2014 - 7:14 AM
|
|
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
I had a large urge to solder so I went out and grabbed some bulk leds/resistors/perfboard and starting making these
 so far 8x 10mm seems to be the best fit but I am going to try and fit in 12. I am trying different circuit layouts to see what is the cleanest. next is to weather proof them with some liquid tape or similar high temp gasket sealer. after that, I have to figure out how to securely mount them in the light housing. I will have a hand full of these at the end so Ill probably sell some off 
This post has been edited by Tigawoods: Oct 2, 2014 - 7:18 AM -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
|
Oct 3, 2014 - 7:41 AM
|
|
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
here is the fist completed unit. Id like to make it a bit cleaner but Im not sure if its worth the extra time/effort since it will be packed into the light housing.
As rough as it may look I wanted to be completely certain that it is vibration resistant (my car will put that to the test for sure lol) and weather resistant. It fits super snug into the housing. I need to decide if there is a way to make it removable or just glue the sucker in there.  
-------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
|
Oct 3, 2014 - 8:33 AM
|
|
 Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
I can't wait to see how this looks.
-------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Oct 3, 2014 - 5:08 PM
|
|
 Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
I'm looking into some sort of flex board for the turn signals, both front and rear. I think it would be a really nice upgrade over stock bulbs...but if one goes out it looks bad
|
|
Oct 3, 2014 - 6:38 PM
|
|
 Enthusiast Joined Jan 30, '14 From Cortland NY Currently Offline Reputation: 5 (100%) |
Pretty sure that the liquid tape there will prove very weather proof for you. As a thought for putting it in there and making it removable, considering you have the panel cut to fit in snug I would just run electrical tape around the sides of it and cut off any extra overhang. That way you can just put it in with a little force and it will stay by being compressed by the plastic cover and it would be removable when needed.
-------------------- 1997 ST:Limitedly Green
This car is not about racing... This car is not about power or performance... It's purely about being cool. |
|
Oct 3, 2014 - 9:36 PM
|
|
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
QUOTE (HectortheRican @ Oct 3, 2014 - 9:33 AM) I can't wait to see how this looks. I have a lil video that Ill upload to facebook. this site needs embedding lol QUOTE (mkernz22 @ Oct 3, 2014 - 6:08 PM) I'm looking into some sort of flex board for the turn signals, both front and rear. I think it would be a really nice upgrade over stock bulbs...but if one goes out it looks bad special_edy did that along with a sequential setup. it is ALOT of soldering, but he used 5mm leds. give it a go! I dont think he ever finished the project completely QUOTE (igpx12 @ Oct 3, 2014 - 7:38 PM) Pretty sure that the liquid tape there will prove very weather proof for you. As a thought for putting it in there and making it removable, considering you have the panel cut to fit in snug I would just run electrical tape around the sides of it and cut off any extra overhang. That way you can just put it in with a little force and it will stay by being compressed by the plastic cover and it would be removable when needed. that stuff it tough! I glue gunned it all around the perimeter...then I read this haha. I dont think it will have held that well with tape. It was snug but, my car is rough, it would have rattled loose -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
|
Oct 3, 2014 - 11:13 PM
|
|
 Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
I use liquid tape to waterproof my rc scale trucks.
It works great! All my buddy's say I drive boats with tires lol Just make sure the isn't any air pockets and you'll be perfect -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235  n |
|
Oct 3, 2014 - 11:19 PM
|
|
|
Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
QUOTE (Tigawoods @ Oct 3, 2014 - 10:36 PM) QUOTE (mkernz22 @ Oct 3, 2014 - 6:08 PM) I'm looking into some sort of flex board for the turn signals, both front and rear. I think it would be a really nice upgrade over stock bulbs...but if one goes out it looks bad special_edy did that along with a sequential setup. it is ALOT of soldering, but he used 5mm leds. give it a go! I dont think he ever finished the project completely Definitely not looking to do the whole sequential part. Way too much work and I'm not a fan of it. Just want something simple, but if I were to do the turns, I'd have to do the rest of the lights too.. |
|
Oct 8, 2014 - 9:10 PM
|
|
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
this car is SO 2014
-------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
|
Oct 8, 2014 - 9:47 PM
|
|
 Enthusiast Joined Apr 9, '14 From Sydney, Australia Currently Offline Reputation: 3 (100%) |
Looks so damn clean! I love it
Just wanting to ask as well where you got your CELICA brake caliper stickers?
-------------------- It's not always about how fast a car is, but how it makes you feel.
 ------> 1997 ST204 Toyota Celica SX <------ Click Here To View My 6gc Thread! :) -----------> August 2015 COTM! <----------- |
|
Oct 8, 2014 - 10:37 PM
|
|
 Enthusiast Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%) |
QUOTE (Tigawoods @ Oct 8, 2014 - 8:10 PM) this car is SO 2014 Damnit man, take my money! 
-------------------- |
|
Oct 9, 2014 - 3:19 AM
|
|
|
Enthusiast Joined Apr 9, '14 From Sydney, Australia Currently Offline Reputation: 3 (100%) |
Couldn't agree more!
-------------------- It's not always about how fast a car is, but how it makes you feel.
------> 1997 ST204 Toyota Celica SX <------ Click Here To View My 6gc Thread! :) -----------> August 2015 COTM! <----------- |
|
Oct 9, 2014 - 7:38 AM
|
|
 Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
Sign me up!
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
 Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
|
Oct 9, 2014 - 8:15 AM
|
|
 Enthusiast Joined Jan 20, '09 From Winnipeg Currently Offline Reputation: 5 (100%) |
That looks awesome.
You might be a little over your head on the upcoming sales 
-------------------- -Protection mode, For when your amp tries to blow its load. 1995 Toyota Celica GTS - Daily Driver 1999 Chevy Cavalier - Winter Beater 1994 Honda Civic CX Hatchback - Dead My Celica! |
|
Oct 9, 2014 - 8:31 AM
|
|
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
lol I hope not!!
so far I have a good amount of interest. If people are interested in participating in the "buyback program" with their old lights I can really get the ball rolling on them. one thing I am trying to figure out before I start selling is adding in a brake light strobe module as an option. I have one installed into my third brake and I love it. Its very F1 lol -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
|
Oct 9, 2014 - 3:59 PM
|
|
 Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
make the 3rd brake light lense clear light the poopra
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
|
Oct 12, 2014 - 1:02 PM
|
|
|
Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
forgot you had a thread for that light now. took out this post.
This post has been edited by mkernz22: Oct 12, 2014 - 2:12 PM |
|
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 6:43 AM |