6G Celicas Forums

Got these parts I need to let go of, look at pics and let me know what you want and price,,,,I can ship but rather not, would prefer local buyer.....can only take paypal if not cash at sale,,,,can contact me directly 708-37two-1six85 Matt parts can be picked up in Chicago Il area....Thanks, all parts in picture are for sale. I have JDM power folding mirrors in white but cant find pics, also if I see any extras I'll throw them up here. Ask for condition and I'll give specs and provide extra pics if needed




I will be parting out this motor soon, 97 5S bottom 2nd Gen 3SGTE top and st205 electronics(ecu,harness,injectors etc)

Would you be willing to separate the 4" speaker grills from the door cards? Also do you have the speakers. I don't care if they are blown I mostly want them for the mounts

No I dont have speakers you mean upper ones, think their mounted directly to door, and lower has no difference between 6 or 8 speakers, if you need mounts let me know. I would rather not pull grills off of cards, besides one of lower is missing, if you want I could probably get you brand new ones, think lowers are 12 a piece and upper about 20 each from Toyota.
Matt
P.S. Im going to look into speaker deal thing, but I dont remember having those speakers, my door cards were trashed and I ran these 8speaker ones for time being till I got 6 speaker replacement, and any card can be turned into 8 speaker one.

How much for the turbo?

I'm interested in bringing a truck and loading everything all at once,. what would you want?

This would be an awesome pile of parts to throw at my daily driver, I've got most of it for the project already, but would love to dress up my dd too.

Hi.
How much for
1. ST205 electronics (harness, injectors and sensors (mainly MAP sensor only). - I don't need the ECU.
2. I that a red front splitter? I so how much please.

Thanks,
Jason.

Turbo is not for sale sorry its not a stock unit its a TD06H-20G bolted to stock mani via adapter....

Throw me an offer for what ever you want and bring truck to hall it all away...stuff been sitting for few years wont be using anything and dont really need extras.....

No MAP sensor and Cold start injector on harness, besides all that its all there
And red spliters are rear parts bud, whites are full set,,,,,postage to UK would be killer,,,,,,but Im willing to trade if you can help me out,,,,I need rear bumper number pate holder/panel with rear fog lamps off of Nissan 200sx S14 Silvia Euro spec...If you can get me that panel posted to US I'm willing to work with you on parts you need, and I could possibly get you front spliter SSIII in red (but I would have to check first)

Matt,,,,


By the way to make things clear for parts above in pics
Kouki projectors set.....................SOLD>>>>>>>>>>>>>>
Low projectors broken tabs.....200 take them or throw me an offer
SSIII front splitters I can ship this for 225...box will have to be big or 200 picked up for full set............Rears are sold only front splitters left
SSIII rear spliters red ones......................SOLD>>>>>
Door panels I dont know their in not that good of shape 40 bucks picked up for pair
Rear kouki tails 200 picked up,,,throw in 45 for postage
JDM folding mirrors white 175 picked up (comes with switch) if shipped give me at least 25 to post it
Got 3rd gen timing cover,,,what is it worth?
Got 2nd gen timing belt tensioner brand new
Water bump back housing 2nd gen with orings
Also have hazard(4 way) switch, power mirror switch, and clock
6th Gen floor mats (4pieces) in black their 6.5/10 condition

As far as motor goes, I paid 400 to have IM, cover, and mounting plate, TB powder coated,,,,but Im willing to part it out...

Matt

This post has been edited by placham: Nov 19, 2014 - 11:21 PM

How much for driver side high beam (clear jdm)

I doubt I would be able to sell one by it self then, or set of 3 lamps, PM me please might be able to help you out bud,

Matt.

Hi.
Just to clarify, you want just the rear number plate holder off an S14 or S14a? Also UKDM or JDM as I think they are different.

Ok,forget the sensors but how much for just the harness please. Basically I'm turbocharging my ST202 so having a 205 harness will allow me to fit a PnP ECU. Am I right in thinking I have a cold start injector on my UK 3SGE. I have family in the US so postage is not too much drama for now. Yes, if you can get me front splitters I'd love a price please.

Many thanks,
Jason.

Give me a sec, I'll throw pic up of part......only came on Euro spec 200sx S14/S14a,,J-spec imports have standard bumper...I need the number panel and both lamps, if you can get section of harness and mounting hardware it be awesome...I can cut my bumper and fit panel, getting panel here in states is next to impossible, if it was jap part I would have few by now...
Now what do you need from St205, I have harness, ECU, injector w/rails 440cc or I have 2 sets of st215 injectors dont need resistor as their high impedance and are stock 550cc top feeders, also have dissiy for st205, ignitor, coil, TPS, oil p/s, harness has relay box on it still so it be a plug and play deal, think there one or 2 connectors cut off, but could reuse it from your old harness,,,,I had it for my 5s build never finished went with St215 3sgte instead in my GT.



This post has been edited by placham: Nov 6, 2014 - 10:46 AM

Interested in headlights and taillights.
Price?

Id taht 375 for the full set of projectors? (High and low)?

Hi.

Ok I have messages a few breakers for your bumper trim. I will be happy to send to you no problem.

Can you please tell me what year the 205 harness is, as the ECU manufacturer would like to know for a PnP solution.

I haven't got injectors yet, so either set is fine for what I need.

What price please.
J

Yes full set of kouki projectors (one broken tab on left low beam, top, tab will come with lamp) for 375 cash picked up if you need it shipped add 50 think that would cover it and I know thats on low side of postage via US post, I dont get discounts on postage and thats seems to be cheapest for items I shipped before.... And I think thats a fair price for set shipped....I would have to insure it, just incase because their glass, for full value of lamps.....just incase they do get trashed, you wont get lamps at least you'll get your money back.


All prices are stated above, feel free to shoot me an offer..

Jason, let me know whats the cost of panel and postage to me,, if you take 440cc injectors it will come with rail as thats how they sit now, 550(540cc) teal/bluish are top feeds I only have injectors.....Help me identify harness, Im unaware of changes is there several revisions to ST205? like the Sw20 Mr2's? I'll try to take few pictures tomorrow kinda got a lot on my plate right now..

Matt

Hey buddy. I found a breaker near me who will do it for £35. I can collect it for you.

I will try and work out how much postage is to you. Can you give me your address please I a PM. Do you want the fog lights as well?

J

Ok I've just realised your harness is no good for me as you are LHD. I can get one locally.

I'd like a price on injectors and rail though. It's for my rev 3 3SGE.

J

Harness is off of RHD Jap spec St205 3sgte bud, we never got the 205 in states only 185s and 165s. if still interested let me know

Matt

How much for both door cards shipped to 44144 Cleveland ohio

UPDATE ********kouki headlamps full set sold********

Cards I dont know, how would I even ship this in the first place? I could drive it in area(or half way) if I was buying something there.