FS - rear strut bar, clear side markers, cluster (Km) |
FS - rear strut bar, clear side markers, cluster (Km) |
Jul 10, 2015 - 2:18 PM |
|
Enthusiast Joined Sep 5, '13 From New brunswick Currently Offline Reputation: 0 (0%) |
Rear strut tower bar, cover is in good shape, missing pull tab on the zipper, scratches in the bolt hole areas,
90$ Cad shipped in Canada. Clear depo brand side markers, ., no cracks, all tabs intact, no screws. side markers have some clouding/dirt, could never keep moisture from not getting into them, no bulbs or sockets with the side markers as the stock ones fit inside of them. 25$ CAD shipped in Canada. TURNS HAVE BEEN *SOLD* Splitters *SOLD* MOMO Wheel *SOLD* Coilovers *SOLD* Cluster currently being used in my car (ST204) made this one from 2 different clusters, got my hands on a st205 cluster that has the carbon fiber Tom's bezel and swapped it over to mine as well as the rpm and speed gauges from the st205 cluster, would sell for the right price as I don't find too much info on the tom's bezel piece, only one I saw was going for 250 USD a while back online. Parts for a Thule roof rack, I have the Thule 231 fit kit and the Thule 477 Short roofline adapter, Still needs the older 400xt feet and 50 inch load bars, the feet and bars are easier to find in the used market, 100$ Cad plus shipping costs to your location. Most cases shipping to the states is usually $10 more This post has been edited by SirJules: Sep 26, 2015 - 4:12 PM |
Jul 12, 2015 - 3:58 AM |
|
Enthusiast Joined Jun 12, '15 From Ontario Canada Currently Offline Reputation: 0 (0%) |
Hey,
Were in Canada are you located? I might be able to come pickup those tail lights thanks! |
Jul 12, 2015 - 12:18 PM |
|
Enthusiast Joined Sep 5, '13 From New brunswick Currently Offline Reputation: 0 (0%) |
|
Jul 13, 2015 - 3:21 AM |
|
Enthusiast Joined Jun 12, '15 From Ontario Canada Currently Offline Reputation: 0 (0%) |
Sending you a pm!
|
Jul 26, 2015 - 7:17 AM |
|
Enthusiast Joined Feb 20, '12 From Fresno CA Currently Offline Reputation: 0 (0%) |
SOLD SOLD SOLD Kouki taillights, amber removed. Red led bulbs for the turns, White Led reverse bulbs and Red Led brake bulbs. Has resistors installed so no hyper flash, no nuts. no cracks, 100% of bezel intact, 150$ Cad plus your shipping costs. SOLD SOLD SOLD Rear strut tower bar, cover is in good shape, missing pull tab on the zipper, scratches in the bolt hole areas, 70$ Cad plus shipping costs. Pre facelift clear depo brand turns and clear side markers, 60$ CAD for all 4 plus shipping., no cracks, all tabs intact, no screws, turns have extra bulb sockets and orange turn bulbs in them. side markers have some clouding/dirt, could never keep moisture from not getting into them, no bulbs or sockets with the side markers as the stock ones fit inside of them. Interested in the preface lights, how much to 93702 CA |
Aug 10, 2015 - 1:16 PM |
|
Enthusiast Joined Sep 5, '13 From New brunswick Currently Offline Reputation: 0 (0%) |
New stuff posted.
|
Aug 11, 2015 - 1:48 PM |
|
Enthusiast Joined Feb 15, '08 From Royal Oak, MI Currently Offline Reputation: 7 (100%) |
How much shipping for the strut tower bar to M6A 1X5?
-------------------- God made man....
Everything else... Made in China |
Aug 11, 2015 - 3:51 PM |
|
Enthusiast Joined Sep 5, '13 From New brunswick Currently Offline Reputation: 0 (0%) |
|
Aug 30, 2015 - 10:00 AM |
|
Enthusiast Joined Sep 5, '13 From New brunswick Currently Offline Reputation: 0 (0%) |
Added my Tanabe sustec pro coilovers.
|
Aug 31, 2015 - 7:21 AM |
|
Enthusiast Joined Apr 7, '04 From Toronto Currently Offline Reputation: 3 (100%) |
How much kms on the coilovers?
|
Aug 31, 2015 - 8:45 AM |
|
Enthusiast Joined Jan 20, '09 From Winnipeg Currently Offline Reputation: 5 (100%) |
Is it possible to get those splitters to sit flush with the body, without trimming/cutting the material and re-fiberglassing?
-------------------- -Protection mode, For when your amp tries to blow its load. 1995 Toyota Celica GTS - Daily Driver 1999 Chevy Cavalier - Winter Beater 1994 Honda Civic CX Hatchback - Dead My Celica! |
Sep 1, 2015 - 8:20 PM |
|
Enthusiast Joined Sep 5, '13 From New brunswick Currently Offline Reputation: 0 (0%) |
|
Sep 1, 2015 - 8:41 PM |
|
Enthusiast Joined Sep 5, '13 From New brunswick Currently Offline Reputation: 0 (0%) |
Is it possible to get those splitters to sit flush with the body, without trimming/cutting the material and re-fiberglassing? Not sure, the ss splitters are designed for the facelift bumper and mine id pre facelift, plus my lower section of my fenders are probably a little out of shape, i have not plastics underneath the car and i have no fender liner in that area causing my fenders to be a little out of shape, the gap was bigger when i first tried to put them on but as I tweaked the lower portion of the fender out the gap got a little smaller. |
Sep 1, 2015 - 9:09 PM |
|
Enthusiast Joined Sep 5, '13 From New brunswick Currently Offline Reputation: 0 (0%) |
Added pics of coilovers, can send detailed pictures direct to your email, just send me off a PM.
|
Sep 2, 2015 - 11:31 AM |
|
Enthusiast Joined Apr 15, '13 From Winnipeg, MB, Canada Currently Offline Reputation: 14 (100%) |
Willing to sell the clear turns separate?
-------------------- 2007 Impreza 2.5i - Daily
1994 Camry - Sold 1994 Celica - Sold :( Click here to see my progress thread! |
Sep 9, 2015 - 7:11 AM |
|
Enthusiast Joined Sep 5, '13 From New brunswick Currently Offline Reputation: 0 (0%) |
Coilovers added.
This post has been edited by SirJules: Sep 9, 2015 - 8:07 PM |
Lo-Fi Version | Time is now: November 25th, 2024 - 1:38 PM |