6G Celicas Forums

No Worries, I was just curious what made it fit, whether it was the bumper that was modded or the hood, cause neither appeared to have been modded.
I also thought it may just have been the angle of the photo, but it looked great.

I wish I coudl find a sway bar for that cheap. Where abouts on amazon were you looking? I didn't even realize they sold parts there.

I just searched the model: ST Suspension 51200. I ended up selling it for a little more then what I paid for it tho.

You can find all kinds of stuff on amazon. I've found some hard to find parts by going to the manufacturers sites and getting the model numbers. Search by the model cause search by description is garbage on amazon.

The bumper looked good without the hood and it flowed great. I've had several people ask me how it was done but the guy who did it for me was no longer at that shop.

Have everything I need (i think) to tackle the front and rear brake upgrade tomorrow minus brake fluid.

Also, the 4 smaller boxes against the wall are the motor and transmission mounts, hoping to get those done by the end of the month.

Oo rotors for the track

I do eventually want to track it, though that's many months away. I found a good deal on them so I figured why not.

did you get the calipers and brackets powder coated? they look awsome

Thanks!

Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh.

the brake upgrade is gonna make your car look so much better. but one thing tho, you just have to swap out t
he GT backing plate, plus bracket, caliper and brake lines? i was thinking just getting the whole spindles from a yard and putting those in with lines.

This post has been edited by LtSolid: Oct 13, 2015 - 2:15 PM

You will also need the parking brake cables attached to the backing plate. You have to get underneath the car and disconnect them behind the exhaust cover. For some reason this was hardly mentioned so it took me a while to figure out before I found it. This is for the rears.

You can just swap the spindles as well but it seemed harder that way, at least for me since i didn't have tools to remove those really have bolts and I want to say the control arm is usually seized, which involves having to cut it. I found it much easier to take off parts individually since I was gonna clean, paint and swap the hardware anyway.

This post has been edited by jesse09: Oct 13, 2015 - 3:58 PM

Those calipers came out really nice! Brake upgrades ftw!

So I didn't expect the EBC green stuff pads to be THIS GREEN. Ya i know that sounds crazy. It doesn't look bad just personally not about the colorful look. I'm gonna dump them and pick up a set of TRD pads for the front and OEM Toyota pads for the rear. Unfortunately cars going to have to sit for about a week until they arrive




Here's a comparison photo of the old cheapo ST rotor vs the slotted EBC GT rotor.

Thanks! I'd like to get on your level and do a GT4 updgrade lol

thanks for the info! had no idea about the parking brake line. i assumed i could use my ST cable. show some pics of the TRD pads, never knew trd made and still sell pads for our celicas.

I just ordered the pads so hopefully they come in next week. They're unavailable at the local dealer but I called another one and they had some in stock. I'll upload some when they come in, until then I'm gonna have to ride on some autozone pads

But those vibrant colors really add flare and awe to your whip in the JDM, seem haven't you seen?

Hi Jesse09. Nice upgrades. can you post some more pictures of the roof rack. I really like it and tell us what brand it is with the spoiler in the front.
Thanks

I don't think i've seen it. I wouldn't mind a little green cause I thought the shims would cover up most of it. But it turns out these don't come with shims and installing them isn't recommended. so the green is fully exposed

Thanks msk59. Here's some pics of the roof rack

Parts I used are

Yakima Q towers
Yakima Q 11 clips
Yakima stretch kit
Yakima 48" crossbars
Yakima 38" 35 year anniversary fairing
Yakima locks and keys

It's pretty sturdy and sits nice. I bought the q towers, crossbars, locks and keys used. The rest new

Awesome. Yeh that does looks cool especially with the front spoiler! Thanks very much.

So the TRD pads were discontinued as expected. I went ahead and kept the EBC green stuff pads on there and have now put about 200 miles on the new front brake upgrade.

Overall a very good improvement over my factory setup so far. It's not too much or too little. Smooth with hardly any noise but there is a moderate amount of dust that has accumulated.

Hopefully I'll have times for rears this week