 Toyota 86 rims on 95 Celica?, will they fit? |
  |
 Nov 7, 2015 - 4:39 AM
|
 
|
|
Enthusiast  Joined Apr 9, '13 From ACT, Australia Currently Offline Reputation: 0 (0%)  |
My appologies for the simple question all, I'm looking to go to 16inch rims for my 95 Celica and was looking the the Toyota 86 rims. They look great but I'm lead to believe that they come in 16 inch but have a +48 offset? if this is the case, is it possible to put these on my car without too much work? I run King Springs (low) and my current wheels are 17inch with a +38 offset (close to struts but does not touch) they scrape a little when turning and you hit a bump, but otherwise they fit ok.
The offset will look to be a problem, will I have to get the guards rolled or put in spacers? Any info would br great  Cheers J This post has been edited by Justin73: Nov 7, 2015 - 4:40 AM |
|
Nov 7, 2015 - 1:33 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
+48 offset. The rims will be sucked in more. Depends on tires you are running.
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 7, 2015 - 4:41 PM
|
|
|
Enthusiast Joined Apr 9, '13 From ACT, Australia Currently Offline Reputation: 0 (0%) |
I intend to use a 205/50/16 tyre.
J |
|
Nov 7, 2015 - 10:17 PM
|
|
 Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
QUOTE (Justin73 @ Nov 7, 2015 - 1:41 PM)  I intend to use a 205/50/16 tyre. J 215/45/17 is best for the frs rims. -------------------- |
|
Nov 8, 2015 - 12:00 AM
|
|
|
Enthusiast Joined Apr 9, '13 From ACT, Australia Currently Offline Reputation: 0 (0%) |
I currently run 235/45/17 so I'm thinking the 205/50/16 should fit without too much hassel.
|
|
Nov 8, 2015 - 1:20 PM
|
|
 Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
QUOTE (Justin73 @ Nov 8, 2015 - 1:00 AM) I currently run 235/45/17 so I'm thinking the 205/50/16 should fit without too much hassel. Ha you do realize fitting a 16" tire on a 17" rim more than likely won't work. A 235/45R17 will rub on front. Get the 215/45 like he said and lay your head to rest -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
|
Nov 8, 2015 - 3:10 PM
|
|
|
Enthusiast Joined Jul 1, '14 From Hawaii Currently Offline Reputation: 3 (100%) |
QUOTE (Justin73 @ Nov 8, 2015 - 1:00 AM) I currently run 235/45/17 so I'm thinking the 205/50/16 should fit without too much hassel. The tire will not fit. The rim is about 18" at the lip, and the tire won't fit over that. If it does, part of the bead will be overstretched and probably not seal. Not to mention it will not balance easily QUOTE (BonzaiCelica @ Nov 8, 2015 - 2:20 PM) QUOTE (Justin73 @ Nov 8, 2015 - 1:00 AM) I currently run 235/45/17 so I'm thinking the 205/50/16 should fit without too much hassel. Ha you do realize fitting a 16" tire on a 17" rim more than likely won't work. A 235/45R17 will rub on front. Get the 215/45 like he said and lay your head to rest To run the gt86s wheels you need at least a 5-10mm spacer up front to clear the brake calipers which (at 10mm) is just barely enough to run the 235s. 225s will just barely clear as well with a 5mm spacer. |
|
Nov 9, 2015 - 12:29 AM
|
|
|
Enthusiast Joined Apr 9, '13 From ACT, Australia Currently Offline Reputation: 0 (0%) |
Thanks all, the wheels are off a Toyota 86 and the tyres on it are 205/50/16, so I figured that if I'm currently using the 17's with the 235 width, I believe the 16's should not give me too many hassles when fitting, unless I need spacers.
Cheers J QUOTE (BonzaiCelica @ Nov 9, 2015 - 5:20 AM) QUOTE (Justin73 @ Nov 8, 2015 - 1:00 AM) I currently run 235/45/17 so I'm thinking the 205/50/16 should fit without too much hassel. Ha you do realize fitting a 16" tire on a 17" rim more than likely won't work. A 235/45R17 will rub on front. Get the 215/45 like he said and lay your head to rest lol, soz Bonzai, I wasn't clear, I meant swapping the 17 wheels and tyres for 16 inch wheels and tyres
|
|
Nov 9, 2015 - 1:18 AM
|
|
 Enthusiast Joined Apr 15, '13 From Winnipeg, MB, Canada Currently Offline Reputation: 14 (100%) |
Stock FRS/86 wheels here are 17", did you get different ones there?
-------------------- 2007 Impreza 2.5i - Daily
1994 Camry - Sold 1994 Celica - Sold :(  Click here to see my progress thread! |
|
Nov 9, 2015 - 4:03 AM
|
|
|
Enthusiast Joined Apr 9, '13 From ACT, Australia Currently Offline Reputation: 0 (0%) |
Yes Peg, the 86's here can have 16 or 17 inch wheels.
J |
|
Nov 9, 2015 - 6:35 AM
|
|
 Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
86 base model 16's, and GT86/TRD86/etc 17's
-------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
|
Nov 9, 2015 - 7:33 AM
|
|
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
Pics of these rims? I'm curious to see how they look like. Lol.
-------------------- |
|
Nov 12, 2015 - 4:44 AM
|
|
|
Enthusiast Joined Apr 9, '13 From ACT, Australia Currently Offline Reputation: 0 (0%) |
Bugger, got a mate who bought a Toyota 86 with the 16inch wheels, after placing a wheel on the back and front, I can safely say for those who were after this wheel option for their 95 Celica, sorry but the 86 wheel will hit the front brake caliper, back is fine but no go on the front.
Cheers J This post has been edited by Justin73: Nov 12, 2015 - 7:07 PM |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 10:38 PM |