Spring meet --- Midwest --- 5/7/2016, Date set in stone per chris... |
Spring meet --- Midwest --- 5/7/2016, Date set in stone per chris... |
Apr 6, 2016 - 3:36 PM |
|
Enthusiast Joined Aug 17, '09 From Millard, Omaha, Nebraska Currently Offline Reputation: 1 (100%) |
Steering knuckle issue?
|
Apr 6, 2016 - 7:05 PM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
I wonder if the knuckle is warped somehow? Maybe pick a knee assembly from the junk yard and swap the knuckle over.
Wait, Racecarp has a motorcycle? ****...that kid's not going to make it past 30 is he? -------------------- |
Apr 7, 2016 - 8:10 AM |
|
Enthusiast Joined Sep 1, '09 From Marengo, IL Currently Offline Reputation: 0 (0%) |
Hmmmmm... Did not even think about the knuckle... It would make sense too. My wife was punted in the right rear when she was stopped at a light before it started eating bearings. The car got moved about a foot. We haven't gotten it realigned since then. Maybe the knuckle got torqued just enough to cause the bearings to not be happy. I would figure that there would be some uneven tire wear, but I check for that every time I rotate...
Edit: The affected wheel bearing is the left front, opposite of where she was hit (which would make sense). This post has been edited by narly_charley: Apr 7, 2016 - 8:11 AM -------------------- 2000 GT-S 6 SPD... SOLD! |
Apr 7, 2016 - 8:13 PM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
That seems a stretch, the alignment shouldn't cause bearings to fail like that and to warp a knuckle you'd have to bang it up pretty hard or get it really hot, but that's the only part that that's been the constant that hasn't changed. The hub has been changed, the bearing has been changed, the nut is torqued to spec now, the only parts that haven't been changed are the knuckle and the axle right? The axle shouldn't cause any issue, it's seated inside the hub. Unless there's some fault in how you're assembly the hub and bearing together into the knuckle...like if you're pressing the hub in without supporting the inner bearing races?
-------------------- |
Apr 7, 2016 - 9:22 PM |
|
Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
riding a bike with the spring we have been having.. yuck
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Apr 8, 2016 - 5:32 AM |
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
Bad strut on that side?
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Apr 8, 2016 - 6:51 AM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
Defective driver.
-------------------- |
Apr 8, 2016 - 8:10 AM |
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
How does the inside of the hub look? If there's any damage in there it can chew up your bearings. Some of the biggest causes of bearing failure are heat, contaminants, and improper installation. Given that they are new bearings, there likely isn't a lubrication issue. Could be heat or the way the bearing has been installed. Are you having the same shop install it each time?
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Apr 8, 2016 - 8:59 AM |
|
Enthusiast Joined Sep 1, '09 From Marengo, IL Currently Offline Reputation: 0 (0%) |
My dad looked through his "technician database" yesterday and found that people have been having issues with the Dorman Hubs (that's what we used).
We're using a hub tamer tool to press the bearing into the hub. The strut is worn, they all are. Haha! I don't see a bad strut affecting the bearing THAT much. I think I'm going to get an OEM hub and try that. Hopefully it lasts longer than 3 months. -------------------- 2000 GT-S 6 SPD... SOLD! |
Apr 8, 2016 - 7:41 PM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
That's a possibility! I've seen some issues with Dorman products over the past few years myself, they had a bad run of ball joints on their import control arms.
-------------------- |
Apr 12, 2016 - 9:45 AM |
|
Enthusiast Joined Sep 1, '09 From Marengo, IL Currently Offline Reputation: 0 (0%) |
Anyone work at Toyota that can get deals on OEM parts? Haha!
-------------------- 2000 GT-S 6 SPD... SOLD! |
Apr 12, 2016 - 1:05 PM |
|
Enthusiast Joined Aug 17, '09 From Millard, Omaha, Nebraska Currently Offline Reputation: 1 (100%) |
Ask if you pay with cash if they give a discount. Credit card transactions are expensive.
|
Apr 12, 2016 - 4:18 PM |
|
Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
Anyone work at Toyota that can get deals on OEM parts? Haha! I dont work at one anymore but i still get a discount. -------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Apr 12, 2016 - 8:33 PM |
|
Enthusiast Joined Aug 17, '09 From Millard, Omaha, Nebraska Currently Offline Reputation: 1 (100%) |
|
Apr 12, 2016 - 8:47 PM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
I can get shop price, but by the time you drive all the way here for it you'll have burned more money than it would have saved you.
-------------------- |
Apr 13, 2016 - 6:46 AM |
|
Enthusiast Joined Sep 1, '09 From Marengo, IL Currently Offline Reputation: 0 (0%) |
Too late. Haha!
I ordered them through ToyotaPartsDeal. $147 shipped for the hub and wheel bearing. -------------------- 2000 GT-S 6 SPD... SOLD! |
Apr 16, 2016 - 10:31 PM |
|
Enthusiast Joined Aug 17, '09 From Millard, Omaha, Nebraska Currently Offline Reputation: 1 (100%) |
Who's got the meats?
|
Apr 16, 2016 - 11:08 PM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
-------------------- |
Apr 18, 2016 - 9:04 AM |
|
Enthusiast Joined Sep 1, '09 From Marengo, IL Currently Offline Reputation: 0 (0%) |
I'll bring something for us vegans/veggies.
-------------------- 2000 GT-S 6 SPD... SOLD! |
Apr 18, 2016 - 6:32 PM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
My pie has Oreo creme in it from the cookies, I don't know if that's Vegan/Veggie OK?
-------------------- |
Lo-Fi Version | Time is now: November 26th, 2024 - 11:15 AM |