6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Engine Stalled and Won't Crank....
post Oct 9, 2016 - 1:38 PM
+Quote Post
X_RunnerGT

Enthusiast

Joined Aug 28, '16
From FL, United States of America
Currently Offline

Reputation: 0 (0%)




So I was driving down the road at about 60 when the rpm's dropped and the check engine light flickered and the car just shut off. .... I coasted to the shoulder and attempted to restart it. It won't crank and when the key is turned to on position the check engine light doesn't come on with the rest of them. I know the battery, starter, fuses and alternator are all good. I also thought it may have been the main relay so I replaced it but nada. Any idea what would cause the issue I'm having? Any help would be greatly appreciated.
post Oct 9, 2016 - 6:10 PM
+Quote Post
Bitter

Enthusiast
*****
Joined Mar 11, '06
From Way South Chicago
Currently Offline

Reputation: 0 (0%)




If the engine light doesn't illuminate then odds are the ECM isn't getting power and you do have a blown fuse somewhere, not cranking or cranking and not starting?


--------------------
post Oct 9, 2016 - 6:56 PM
+Quote Post
X_RunnerGT

Enthusiast

Joined Aug 28, '16
From FL, United States of America
Currently Offline

Reputation: 0 (0%)




When I turn the key.... It doesn't crank and at all. You expect to hear the starter turning the flywheel but nothing.
post Oct 9, 2016 - 8:51 PM
+Quote Post
Bitter

Enthusiast
*****
Joined Mar 11, '06
From Way South Chicago
Currently Offline

Reputation: 0 (0%)




Does the car have an alarm?
Check the battery cables for good clean connection to the terminals and the terminals to good clean connections to the battery.


--------------------
post Oct 9, 2016 - 9:03 PM
+Quote Post
X_RunnerGT

Enthusiast

Joined Aug 28, '16
From FL, United States of America
Currently Offline

Reputation: 0 (0%)




QUOTE (Bitter @ Oct 9, 2016 - 9:51 PM) *
Does the car have an alarm?
Check the battery cables for good clean connection to the terminals and the terminals to good clean connections to the battery.


It had an alarm at one point in time but I removed it because it was poorly installed, plus wires were hanging everywhere... I used my multimeter to check for voltage and I'm getting between 11.96-12.15 when I test the grounds
post Oct 10, 2016 - 1:39 AM
+Quote Post
Bitter

Enthusiast
*****
Joined Mar 11, '06
From Way South Chicago
Currently Offline

Reputation: 0 (0%)




If you're seeing voltage drops that bad between the negative post and the case of the starter then it's very likely that there's a bad ground between the battery and starter, run a jumper cable from the negative post to the starter case ear/bolt and see if it'll crank.


--------------------
post Oct 10, 2016 - 7:13 PM
+Quote Post
X_RunnerGT

Enthusiast

Joined Aug 28, '16
From FL, United States of America
Currently Offline

Reputation: 0 (0%)




QUOTE (Bitter @ Oct 10, 2016 - 1:39 AM) *
If you're seeing voltage drops that bad between the negative post and the case of the starter then it's very likely that there's a bad ground between the battery and starter, run a jumper cable from the negative post to the starter case ear/bolt and see if it'll crank.


Yeah at this point I'm checking everything.... Who knows what the DIY electrician did to that car....

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 27th, 2024 - 2:59 PM