6G Celicas Forums

where can i get a cusco lower arm for my st

i would also like to know where i could get one as well as the part number. thanks

anhcore

I'll talk to a vendor I used to work for; I imported my Cusco lower arm bar when I was working there. They should still have all the particulars, I just need to see if we still have the source in Japan.

You guys might have to wait a couple weeks to get them, but if our connection is still good over there, they should definitely be able to supply the bars.

*Edit*
I will hopefully know something tomorrow about availability.

Also, this is the ST202 lower arm bar. I know Cusco lists a bar for the ST205 that looks more substantial, and ties both control arm mounting points together, but I have not fitted this to a USDM car, and don't know if it'd work. It shouldn't be a problem to get the ST205 bar if needed however.

This post has been edited by S_C_M: Mar 29, 2004 - 2:35 PM

well, you can get them here

Taka Kaira

I've got the GAB bar and I think its a waste of money. It stiffens an area thats already pretty stiff. The rear upper bar (on the liftback) and the front upper bar are a lot more important.

What front strut bars fit the GT Hatch? I know the rear GT FOUR fits the GT. What fits the 5SFE ST204 front?


I just want to have matching front and rear strut bars.

ok nevermind

have fun fitting the lower arm bar with the engine in lol

WTF? All you have to do is hold the subframe up with a jack, take two bolts out, and put two bolts back in. It takes like 15 minutes.

must be running the stock exhaust then cos if not, its a mission

get dg_performance bars...cheap and fit great!

You may be talking about the ST205 lower arm bar, which attaches to more points under the vehicle. The ST202 bar only bolts to the front of the lower control arm, and doesn't interfere with the exhaust. It's a really simple install.

I've still heard nothing from Japan, sorry guys. I'll harass my old boss some more.

Yeah, I didn't notice that until now.

Try jdmspecperf.com that is where I got my strut bars from. They are good to work with and they dont charge an arm and a leg. Celica parts might not be advertised on the page, but email or call them becuase they do have them.

just wondering if anybody got the part numbers yet? and is the type 1 or type 2 better? thanks

anhcore