6G Celicas Forums

Every switch job is so different, there is no one way to do it. If you need help, let me know. If you want to do them really simply, my switches, or Drocay's are the simplest. If you need something more than that, or have some different ideas, go for it. If you want help to make them like mine, pm or email me, and I can help you out.

You could always hotwire them like I did

where do you hook up for the power? i hooked it up to the cig. lighter but it kept on blowing fuses.

If you want to do it the "right" way, buy a battery, either a basic one or a cool looking one, and wire it up to that. I need to do that myself. What I did is quite simple. I just pulled out my toyota manual and looked up the info on the fuse box. I found a fuse that had at least 12 volts and wasn't being used and wedged my lead into the slot with the fuse. For my gauges I did the same thing but with my fog light's fuse. Again this probably isn't the best way, but it'll get ya by. If you can though, go with a battery.

I just got 4 from Kmart and hooked them up. 1 for my sub, 2 for neons and 1 for future use, perhaps fog lights..

here a pic of my fog light switch i installed

i've got a 4 switch setup under my deck - check it out Here

there is a pretty cool range of switches available form savage, they are a brushed silver finish with the words etched on to them (start, neon, nos,boost,etc..) they glow up blue and will fit directlly into the indentation on your driverside air vent.
I think you can get them at www.demon-tweeks.co.uk