6G Celicas Forums

I am gettin some kind of clunking noise from my passanger side rear brake assembly. it comes and goes but if I push down the break pedal I get a quick clunking noise. It doesn't seem to make a difference if I am moving or not. I am also gettin a little bit of break release noise.

I have these parts installed:

russel stainless steel brake lines
Brembo cross/slotted rotors
CF composit brake pads

I have checked out the brakes now 3 times and I can't seem to find anything wrong with it. I have removed the calipar and inspected EVERYTHING and cleaned it all up and reapplied the silicone brake grease. I have aslo checked the swaybar so I know that not it either.

So if neone has ne ideas of what I might have wrong - PLEASE LET ME KNOW

thanks
NEVERSTOP

maybe its your sway bars

your clipers might be sticking... if they are then your going to have to take it apart sand it down and lube it up... (get your mind out of the gutter you sick basterds.) .. iyou might also want to check for and air pocket in your lines... if i think of anything eles ii'll let you know

did you make sure that the brake brackets are in place...the pad might be sliding around

ooops double sorry

This post has been edited by fastgt: Aug 25, 2004 - 4:37 PM

Naw checked those

did that it seemed to help some but not much.. might of just been my imagination though

that was the 1st thing I thought and checked it and there okay

Had a friend check it out yesterday.. he had a similar prob in his 99 SI, after he installed his lowering springs, he said his prob was that the 3 upper strut bolts (strut tower) had come loose. I checked these by hand yesterday and they seemed like they might of worked themselves a little loose but wasn't able to tighten them down with nething... will try this weekend and see.. if that the prob I'll let you guys know

did you check the e-brake and make sure thats not sticking?


Oh, how did you get Brembos on the back?????

i have that same prob, so let me know how you fix it!

Its not the ebrake.. I checked that a while back.

as for the brembos I got them off ebay from mastergrade. The authentic stamped bremebo.. and they just slid right on

If I figure it out I will.. check the strut tower bolts and there fine.. gonna disassemble the calipar agian this weekend and check everything out, It wasnt making the noise yesterday so who knows

i have the same problem..except mine are oem brakes and only do it on random.

well I havent heard the sound in almost a week now.. so I dont know

I have this problem too. I did the conversion, so i just figured I screwed something up. I hope someone finds out what it is.

tommorrow I will be messing around with my brake system so I will try a few things and see if I can improve nething.. the sound has come back now so I gotta get it figured out.. have narrowed it down to the capliars

did u check your bearings ? it could be bent

yea kinda starting to lean in that direction.. I checked the calaipars out yesterday and everything is tight.. do have alot of play on the the top half of it and am thinking my guide pins my be going bad.

Ill replace both and see if that helps... I hate matiance stuff... would rather spend the cash on performace stuff

hey never can you put some pics up of your new bakes?