6G Celicas Forums

how much do you guys think it would cost to remove my stock 3 post wing and fill in the holes?

depends which way you wanna go.

you could Remove it by yourself. Then use body filler for the holes then some nail polish or matching paint or touch up paint.

Or spend prolly around $100 for someone at a body shop to do the same.

i used body filler on my 3 post when i toook it off
then when it got painted
i think i spent 50$ of that having it welded shut

if you want i'll sell you my pre shaved hatch
i'm getting cf and don't need it

and my hatch is black too

This post has been edited by playr158: Mar 3, 2005 - 12:21 PM

Do you have boom in your trunk. I shaved a third light from z24 vert once, and I didn't weld a plate(used fiberglass), then i used filler.......2 12"subs eventually cracked my paint
A welder will do it for a 12 pack, just grind down the welds yourself, and a little bit of filler

thanks for your help guys. at the prices you guys mentioned it sounds like i will be wingless soon.

to ahve a shop do it around $200-300
i looked around when i had TRD to see if i wanted TRD installed or be spoilerless