![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast Joined Dec 1, '04 Currently Offline Reputation: 0 (0%) ![]() |
I was wonderinf if it was possible to swap a supra dash in our celicas???
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) ![]() |
99% sure its goin to be too wide to fit into a celica.....you can i guess section it off then make it skinnier to fit to the celica....but you will need a great deal of work.....removing the celica's dash already takes a LONG LONG LONG time.........and getting the supra to fit you'd have to cut and f/g cut f/g cut f/g bakc and forth to get it to work
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 9, '05 From Charlotte Currently Offline Reputation: 0 (0%) ![]() |
I think it's about 1 1/2" to wide, the car is almost 3" wider. It can be done but a dash requires a lot of small parts and unless you can get a whole one I wouldn't mess with it, if you're going to attempt it the best way is to cut the slack out of the passenger side airbag area, make sure you get the air ducts also and I haven't taken apart a Celica dash but a lot of vehicles have a steel reinforcement bar that runs through them.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) ![]() |
same with the celica that steel bar is there
but the supra is more then 3" wider my friend the hood alone is a 5" wide difference |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 9, '05 From Charlotte Currently Offline Reputation: 0 (0%) ![]() |
Celica 68.9" wide
Supra 71.3" wide It's actually less than 3", the fenders aren't as wide on the Supra. |
![]() ![]() |
Lo-Fi Version | Time is now: February 19th, 2025 - 5:11 PM |