6G Celicas Forums

hey you guys i have a complete twin cam 4age head with everything including head bolts and fwd intake manifold from an fx-16 well the head is in great condition with the vlave covers. well if you need some pics well write back or email me at yungazzdriver@netscape.net and name your price or..............I'd definately be willing to trade for a celica stock bumper or stock right fender please let me know.

uhm well no one is interested in a head????? 7age maybe?

i might be interested send me some pix to toyotatech3@hotmail.com

interested post some pics i'm up for another 7age

well heres the head any questions just post or pm and offer

bumpin'

that looks like a big port head and rwd intake from the 8 intake runners

if you got this off a fx-16 i though all were small port engines?

please clear this up for me

This is a bigport head with a FWD intake manifold. This head could have came from an FX16 or 88-89 Corolla GTS, which all had bigports (from the look of the few plugs on the manifold... it's most likely from the FX16. The later 88+ ones used different styles of plugs). The only USDM cars to have ever had the smallport were the 90-91 Corolla GTS and the 90-92 Prizm GSI. The later model 92 Prizm GSI were even MAP sensored...

This post has been edited by Kwanza26: Nov 21, 2005 - 7:03 PM

thanks for clearing that up bee now my question in a NA motor the small port is easier to make power up to 200 horse than the big port with like 11.0:1 pistons

to tell you the truth smallport is good with large comp pistons than bigport but then again ive seen the bigport trd formua atlantic engine which is like 250+ hp well this isnt going expensive at all but i need to know if anyone wants it?

hey yo do you have all the parts the whole complete head with the rocker arms and valves and so on of the head ? send me some pictures to thewiseistone@hotmail.com

thanks

its as complete as can be, everything u want and more!!

This post has been edited by yungazzdriver: Nov 21, 2005 - 10:55 PM

Personally speaking... I like the smallport more... but in terms of possibly making power... they're basically the same thing. The MAJOR difference between the two is TVIS, but if you're looking to make 200+hp n/a... TVIS is gonna have to go anyways since it's gonna act as a mid-range hinderence (not to mention it'll be mostly useless at that power range). This is where the smallport has a slight advantage. The bigport's intake ports are a little bit too big to generate decent midrange velocity without TVIS... but with TVIS, running cams big enough to make 200hp... TVIS causes very noticeable power dips caused by vaccum lag in the actual butterfly system and by the sudden velocity loss (this has been noted many times before with 4AG and 3SGTE peoples and their dyno graphs at all sorts of power ranges). If we're talking the entire motors, as in smallport 4AG versus bigport 4AG... I'd go the the smallport every single time. Smallport is stronger (vsersus the early 40mm crank bigports), and the head is more tuner friendly because of the lack of TVIS. However... since we're talking 7AGE... it's a matter of prefrence. I personally would do smallport because it's more tuner friendly and if you want to go with bigger ports, you can always port out the smallport... meanwhile with the bigport... you're pretty much stuck.

To add a bit more... this head could have also come from a 1st gen MR2. Actually... more than likely... it did since Corolla FX16's are quite rare... and the layout of the intake manifold yells MR2.

This post has been edited by Kwanza26: Nov 22, 2005 - 1:03 AM

Heh... if you don't know what the Toyota head consists of... not worth your trouble bro. Nothing against you... but if you're even gonna attempt a hybrid build... you gotta know your stuff.

Most Toyota belt driven heads don't use rockers. They use very simple shimm'ed buckets (over or under) and then run cams over them. In fact... I can only think of a couple Toyota heads that use an actual rocker system (18/20/22R, 2ZZGE, 2/3TC, and possibly a few other old ones). Simple. Everything in the picture is complete, except for the cam caps and valve cover... but I'm gonna assume those will be included also.

This post has been edited by Kwanza26: Nov 22, 2005 - 12:53 AM

yup their included as well

do you have the bottom end???

no i do not and if any one wants the head itll b 60 shipped w/ all components!!!!!![u]

Man 50$$ shipped???????

haha i'll trade you a 7afe head for a 4age head

50.00 shipped is DIRT cheap... considering shipping is gonna be like 25-30 dollars...